Opamp which works with 5 V input











up vote
2
down vote

favorite












Can an IC 741 op amp can be used with an input voltage of +5 and -5 V?
If not so, what are the commonly used opamps that can be used 5 to 12 V?










share|improve this question









New contributor




Rumesh Madhusanka is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
























    up vote
    2
    down vote

    favorite












    Can an IC 741 op amp can be used with an input voltage of +5 and -5 V?
    If not so, what are the commonly used opamps that can be used 5 to 12 V?










    share|improve this question









    New contributor




    Rumesh Madhusanka is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
    Check out our Code of Conduct.






















      up vote
      2
      down vote

      favorite









      up vote
      2
      down vote

      favorite











      Can an IC 741 op amp can be used with an input voltage of +5 and -5 V?
      If not so, what are the commonly used opamps that can be used 5 to 12 V?










      share|improve this question









      New contributor




      Rumesh Madhusanka is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.











      Can an IC 741 op amp can be used with an input voltage of +5 and -5 V?
      If not so, what are the commonly used opamps that can be used 5 to 12 V?







      op-amp






      share|improve this question









      New contributor




      Rumesh Madhusanka is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.











      share|improve this question









      New contributor




      Rumesh Madhusanka is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      share|improve this question




      share|improve this question








      edited Nov 14 at 8:39









      winny

      4,39231727




      4,39231727






      New contributor




      Rumesh Madhusanka is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      asked Nov 14 at 7:05









      Rumesh Madhusanka

      112




      112




      New contributor




      Rumesh Madhusanka is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.





      New contributor





      Rumesh Madhusanka is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






      Rumesh Madhusanka is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






















          3 Answers
          3






          active

          oldest

          votes

















          up vote
          9
          down vote













          Yes you can use a 741 opamp with a voltage at the inputs between -5 V and + 5 V as long as you give it a supply voltage of at least - 8 V and + 8 V (this is my guess, the 741 has a guaranteed +/- 12V input voltage range when a +/- 15 V supply is used, I re-used that 3 V margin (15 V - 12 V) to get to +/- 8 V) note that that is a symmetrical supply voltage, not a single 5V or 12 V supply.



          You should read "Reasons not to use a 741 op-amp?" some alternatives are suggested there.



          You can use an opamp with a single 5 V supply and have an input voltage of - 5 V, not at the input of the opamp but at the input of the circuit. The limitations of the opamp you use are related to limitations of the circuit design but they are not the same.



          For example, suppose I have an opamp which has a limited input voltage of for example 2 V to 3 V. With that opamp I can still design a circuit that can handle a 0 V to 5 V input voltage. It only relies on how I use the opamp.



          I also recommend you read "Opamps for everyone"



          Some of the other answers here draw conclusions from the Maximum Ratings and the Recommended Operating Conditions. Actually these numbers are completely irrelevant. What is relevant is the Input voltage range, source: The TI datasheet.



          enter image description here



          Note how this is a table with Electrical Characteristics



          The Input voltage range is specified to typically be +/- 13 V but it has a (guaranteed) minimum of +/- 12 V. In a commercial (mass produced) design you would use this +/- 12 V as that you can rely on. The +/- 13 V cannot be relied upon. Also very important: note (1) under the table, this lists the operating conditions which must be applied to get the values listed in the table. Important here is the +/- 15 V supply as the Input Voltage Range is very dependent on the supply voltage that is used.



          Yep, reading (and understanding) a chip's specification isn't easy :-)






          share|improve this answer























          • Feel like this is a good but incomplete answer as the UA741 does have a +5V and -5V recommended supply voltage. Without knowing which 741 opamp is being used or if he needs full rail to rail output or "something close to 5v" we can't for sure say that he needs at least -10 to 10v supply voltage.
            – Remco Vink
            Nov 14 at 9:02










          • @RemcoVink Indeed the question isn't detailed enough to answer properly. So my +/- 10 V supply is just an example of what could be needed (I changed it to +/- 8 V which is also an assumption). But the recommended supply voltage of +/- 5 V supply is irrelevant as that will not give a +/- 5 V input range on a 741 as it does not have rail-to-rail inputs. You need to look at the Input Voltage Range.
            – Bimpelrekkie
            Nov 14 at 9:20




















          up vote
          0
          down vote













          All of this information about IC's can be found in the datasheet. In this case look for the Recommended Operating Conditions.
          You will find the following



          operating conditions



          The recommended operating conditions are between +15 and -15V. This does not mean that you can not power it with a lower supply voltage in this case.



          If we look at the Absolute Max operating conditions.
          enter image description here
          You will see that there is no lower limit boundary defined. So the device won't be damaged for using lower voltages and it even has a remark about powering it with lower voltages.
          However there is always a catch to everything. The datasheet defines the following (5) For supply voltages less than ±15 V, the absolute maximum input voltage is equal to the supply voltage This means that if you power the Vsupply+ with 5V and the Vsupply- with -5V your input signal can not exceed this range!



          EDIT



          The UA741 even shows +5V -5V as the minimum for recommended operating conditions.
          enter image description here



          TLDR: Yes +-5V will probably work, Yes you will limit the Vrange of your input signal, Yes there are plenty of "newer" Opamps with +-5V as their Recommended Operating Condition but thats a product request which are not answered on the site.






          share|improve this answer

















          • 1




            Recommended operating conditions do not tell us if the inputs can work up to that range as well. Often a +/- 5 V supply will result in a usable input voltage range of perhaps +/- 4 V. What is relevant is the Input Voltage Range which (according to table 6.5 in the TI datasheet: ti.com/lit/ds/symlink/lm741.pdf ) is typically +/- 13 V when a +/- 15 V supply is used.
            – Bimpelrekkie
            Nov 14 at 9:13




















          up vote
          -1
          down vote













          If you mean with input voltage the supply voltage, yes. an LM741 is specified for +-22V (or +-18V)Supply voltage.



          If you mean the input voltage on the input pins, also yes. If it is supplied with at least +-5V.



          Have a look at the absolute maximum ratings table in the datasheet on page 4.
          enter image description here






          share|improve this answer

















          • 5




            Ahem, you're referring to the maximum ratings, these are the voltages that do not damage the opamp. These numbers do not say anything about the opamp actually working. Instead of maximum ratings, use operating conditions.
            – Bimpelrekkie
            Nov 14 at 7:31













          Your Answer





          StackExchange.ifUsing("editor", function () {
          return StackExchange.using("mathjaxEditing", function () {
          StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
          StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
          });
          });
          }, "mathjax-editing");

          StackExchange.ifUsing("editor", function () {
          return StackExchange.using("schematics", function () {
          StackExchange.schematics.init();
          });
          }, "cicuitlab");

          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "135"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          convertImagesToLinks: false,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: null,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });






          Rumesh Madhusanka is a new contributor. Be nice, and check out our Code of Conduct.










           

          draft saved


          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f406694%2fopamp-which-works-with-5-v-input%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          3 Answers
          3






          active

          oldest

          votes








          3 Answers
          3






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes








          up vote
          9
          down vote













          Yes you can use a 741 opamp with a voltage at the inputs between -5 V and + 5 V as long as you give it a supply voltage of at least - 8 V and + 8 V (this is my guess, the 741 has a guaranteed +/- 12V input voltage range when a +/- 15 V supply is used, I re-used that 3 V margin (15 V - 12 V) to get to +/- 8 V) note that that is a symmetrical supply voltage, not a single 5V or 12 V supply.



          You should read "Reasons not to use a 741 op-amp?" some alternatives are suggested there.



          You can use an opamp with a single 5 V supply and have an input voltage of - 5 V, not at the input of the opamp but at the input of the circuit. The limitations of the opamp you use are related to limitations of the circuit design but they are not the same.



          For example, suppose I have an opamp which has a limited input voltage of for example 2 V to 3 V. With that opamp I can still design a circuit that can handle a 0 V to 5 V input voltage. It only relies on how I use the opamp.



          I also recommend you read "Opamps for everyone"



          Some of the other answers here draw conclusions from the Maximum Ratings and the Recommended Operating Conditions. Actually these numbers are completely irrelevant. What is relevant is the Input voltage range, source: The TI datasheet.



          enter image description here



          Note how this is a table with Electrical Characteristics



          The Input voltage range is specified to typically be +/- 13 V but it has a (guaranteed) minimum of +/- 12 V. In a commercial (mass produced) design you would use this +/- 12 V as that you can rely on. The +/- 13 V cannot be relied upon. Also very important: note (1) under the table, this lists the operating conditions which must be applied to get the values listed in the table. Important here is the +/- 15 V supply as the Input Voltage Range is very dependent on the supply voltage that is used.



          Yep, reading (and understanding) a chip's specification isn't easy :-)






          share|improve this answer























          • Feel like this is a good but incomplete answer as the UA741 does have a +5V and -5V recommended supply voltage. Without knowing which 741 opamp is being used or if he needs full rail to rail output or "something close to 5v" we can't for sure say that he needs at least -10 to 10v supply voltage.
            – Remco Vink
            Nov 14 at 9:02










          • @RemcoVink Indeed the question isn't detailed enough to answer properly. So my +/- 10 V supply is just an example of what could be needed (I changed it to +/- 8 V which is also an assumption). But the recommended supply voltage of +/- 5 V supply is irrelevant as that will not give a +/- 5 V input range on a 741 as it does not have rail-to-rail inputs. You need to look at the Input Voltage Range.
            – Bimpelrekkie
            Nov 14 at 9:20

















          up vote
          9
          down vote













          Yes you can use a 741 opamp with a voltage at the inputs between -5 V and + 5 V as long as you give it a supply voltage of at least - 8 V and + 8 V (this is my guess, the 741 has a guaranteed +/- 12V input voltage range when a +/- 15 V supply is used, I re-used that 3 V margin (15 V - 12 V) to get to +/- 8 V) note that that is a symmetrical supply voltage, not a single 5V or 12 V supply.



          You should read "Reasons not to use a 741 op-amp?" some alternatives are suggested there.



          You can use an opamp with a single 5 V supply and have an input voltage of - 5 V, not at the input of the opamp but at the input of the circuit. The limitations of the opamp you use are related to limitations of the circuit design but they are not the same.



          For example, suppose I have an opamp which has a limited input voltage of for example 2 V to 3 V. With that opamp I can still design a circuit that can handle a 0 V to 5 V input voltage. It only relies on how I use the opamp.



          I also recommend you read "Opamps for everyone"



          Some of the other answers here draw conclusions from the Maximum Ratings and the Recommended Operating Conditions. Actually these numbers are completely irrelevant. What is relevant is the Input voltage range, source: The TI datasheet.



          enter image description here



          Note how this is a table with Electrical Characteristics



          The Input voltage range is specified to typically be +/- 13 V but it has a (guaranteed) minimum of +/- 12 V. In a commercial (mass produced) design you would use this +/- 12 V as that you can rely on. The +/- 13 V cannot be relied upon. Also very important: note (1) under the table, this lists the operating conditions which must be applied to get the values listed in the table. Important here is the +/- 15 V supply as the Input Voltage Range is very dependent on the supply voltage that is used.



          Yep, reading (and understanding) a chip's specification isn't easy :-)






          share|improve this answer























          • Feel like this is a good but incomplete answer as the UA741 does have a +5V and -5V recommended supply voltage. Without knowing which 741 opamp is being used or if he needs full rail to rail output or "something close to 5v" we can't for sure say that he needs at least -10 to 10v supply voltage.
            – Remco Vink
            Nov 14 at 9:02










          • @RemcoVink Indeed the question isn't detailed enough to answer properly. So my +/- 10 V supply is just an example of what could be needed (I changed it to +/- 8 V which is also an assumption). But the recommended supply voltage of +/- 5 V supply is irrelevant as that will not give a +/- 5 V input range on a 741 as it does not have rail-to-rail inputs. You need to look at the Input Voltage Range.
            – Bimpelrekkie
            Nov 14 at 9:20















          up vote
          9
          down vote










          up vote
          9
          down vote









          Yes you can use a 741 opamp with a voltage at the inputs between -5 V and + 5 V as long as you give it a supply voltage of at least - 8 V and + 8 V (this is my guess, the 741 has a guaranteed +/- 12V input voltage range when a +/- 15 V supply is used, I re-used that 3 V margin (15 V - 12 V) to get to +/- 8 V) note that that is a symmetrical supply voltage, not a single 5V or 12 V supply.



          You should read "Reasons not to use a 741 op-amp?" some alternatives are suggested there.



          You can use an opamp with a single 5 V supply and have an input voltage of - 5 V, not at the input of the opamp but at the input of the circuit. The limitations of the opamp you use are related to limitations of the circuit design but they are not the same.



          For example, suppose I have an opamp which has a limited input voltage of for example 2 V to 3 V. With that opamp I can still design a circuit that can handle a 0 V to 5 V input voltage. It only relies on how I use the opamp.



          I also recommend you read "Opamps for everyone"



          Some of the other answers here draw conclusions from the Maximum Ratings and the Recommended Operating Conditions. Actually these numbers are completely irrelevant. What is relevant is the Input voltage range, source: The TI datasheet.



          enter image description here



          Note how this is a table with Electrical Characteristics



          The Input voltage range is specified to typically be +/- 13 V but it has a (guaranteed) minimum of +/- 12 V. In a commercial (mass produced) design you would use this +/- 12 V as that you can rely on. The +/- 13 V cannot be relied upon. Also very important: note (1) under the table, this lists the operating conditions which must be applied to get the values listed in the table. Important here is the +/- 15 V supply as the Input Voltage Range is very dependent on the supply voltage that is used.



          Yep, reading (and understanding) a chip's specification isn't easy :-)






          share|improve this answer














          Yes you can use a 741 opamp with a voltage at the inputs between -5 V and + 5 V as long as you give it a supply voltage of at least - 8 V and + 8 V (this is my guess, the 741 has a guaranteed +/- 12V input voltage range when a +/- 15 V supply is used, I re-used that 3 V margin (15 V - 12 V) to get to +/- 8 V) note that that is a symmetrical supply voltage, not a single 5V or 12 V supply.



          You should read "Reasons not to use a 741 op-amp?" some alternatives are suggested there.



          You can use an opamp with a single 5 V supply and have an input voltage of - 5 V, not at the input of the opamp but at the input of the circuit. The limitations of the opamp you use are related to limitations of the circuit design but they are not the same.



          For example, suppose I have an opamp which has a limited input voltage of for example 2 V to 3 V. With that opamp I can still design a circuit that can handle a 0 V to 5 V input voltage. It only relies on how I use the opamp.



          I also recommend you read "Opamps for everyone"



          Some of the other answers here draw conclusions from the Maximum Ratings and the Recommended Operating Conditions. Actually these numbers are completely irrelevant. What is relevant is the Input voltage range, source: The TI datasheet.



          enter image description here



          Note how this is a table with Electrical Characteristics



          The Input voltage range is specified to typically be +/- 13 V but it has a (guaranteed) minimum of +/- 12 V. In a commercial (mass produced) design you would use this +/- 12 V as that you can rely on. The +/- 13 V cannot be relied upon. Also very important: note (1) under the table, this lists the operating conditions which must be applied to get the values listed in the table. Important here is the +/- 15 V supply as the Input Voltage Range is very dependent on the supply voltage that is used.



          Yep, reading (and understanding) a chip's specification isn't easy :-)







          share|improve this answer














          share|improve this answer



          share|improve this answer








          edited Nov 14 at 9:31

























          answered Nov 14 at 7:29









          Bimpelrekkie

          45.5k240102




          45.5k240102












          • Feel like this is a good but incomplete answer as the UA741 does have a +5V and -5V recommended supply voltage. Without knowing which 741 opamp is being used or if he needs full rail to rail output or "something close to 5v" we can't for sure say that he needs at least -10 to 10v supply voltage.
            – Remco Vink
            Nov 14 at 9:02










          • @RemcoVink Indeed the question isn't detailed enough to answer properly. So my +/- 10 V supply is just an example of what could be needed (I changed it to +/- 8 V which is also an assumption). But the recommended supply voltage of +/- 5 V supply is irrelevant as that will not give a +/- 5 V input range on a 741 as it does not have rail-to-rail inputs. You need to look at the Input Voltage Range.
            – Bimpelrekkie
            Nov 14 at 9:20




















          • Feel like this is a good but incomplete answer as the UA741 does have a +5V and -5V recommended supply voltage. Without knowing which 741 opamp is being used or if he needs full rail to rail output or "something close to 5v" we can't for sure say that he needs at least -10 to 10v supply voltage.
            – Remco Vink
            Nov 14 at 9:02










          • @RemcoVink Indeed the question isn't detailed enough to answer properly. So my +/- 10 V supply is just an example of what could be needed (I changed it to +/- 8 V which is also an assumption). But the recommended supply voltage of +/- 5 V supply is irrelevant as that will not give a +/- 5 V input range on a 741 as it does not have rail-to-rail inputs. You need to look at the Input Voltage Range.
            – Bimpelrekkie
            Nov 14 at 9:20


















          Feel like this is a good but incomplete answer as the UA741 does have a +5V and -5V recommended supply voltage. Without knowing which 741 opamp is being used or if he needs full rail to rail output or "something close to 5v" we can't for sure say that he needs at least -10 to 10v supply voltage.
          – Remco Vink
          Nov 14 at 9:02




          Feel like this is a good but incomplete answer as the UA741 does have a +5V and -5V recommended supply voltage. Without knowing which 741 opamp is being used or if he needs full rail to rail output or "something close to 5v" we can't for sure say that he needs at least -10 to 10v supply voltage.
          – Remco Vink
          Nov 14 at 9:02












          @RemcoVink Indeed the question isn't detailed enough to answer properly. So my +/- 10 V supply is just an example of what could be needed (I changed it to +/- 8 V which is also an assumption). But the recommended supply voltage of +/- 5 V supply is irrelevant as that will not give a +/- 5 V input range on a 741 as it does not have rail-to-rail inputs. You need to look at the Input Voltage Range.
          – Bimpelrekkie
          Nov 14 at 9:20






          @RemcoVink Indeed the question isn't detailed enough to answer properly. So my +/- 10 V supply is just an example of what could be needed (I changed it to +/- 8 V which is also an assumption). But the recommended supply voltage of +/- 5 V supply is irrelevant as that will not give a +/- 5 V input range on a 741 as it does not have rail-to-rail inputs. You need to look at the Input Voltage Range.
          – Bimpelrekkie
          Nov 14 at 9:20














          up vote
          0
          down vote













          All of this information about IC's can be found in the datasheet. In this case look for the Recommended Operating Conditions.
          You will find the following



          operating conditions



          The recommended operating conditions are between +15 and -15V. This does not mean that you can not power it with a lower supply voltage in this case.



          If we look at the Absolute Max operating conditions.
          enter image description here
          You will see that there is no lower limit boundary defined. So the device won't be damaged for using lower voltages and it even has a remark about powering it with lower voltages.
          However there is always a catch to everything. The datasheet defines the following (5) For supply voltages less than ±15 V, the absolute maximum input voltage is equal to the supply voltage This means that if you power the Vsupply+ with 5V and the Vsupply- with -5V your input signal can not exceed this range!



          EDIT



          The UA741 even shows +5V -5V as the minimum for recommended operating conditions.
          enter image description here



          TLDR: Yes +-5V will probably work, Yes you will limit the Vrange of your input signal, Yes there are plenty of "newer" Opamps with +-5V as their Recommended Operating Condition but thats a product request which are not answered on the site.






          share|improve this answer

















          • 1




            Recommended operating conditions do not tell us if the inputs can work up to that range as well. Often a +/- 5 V supply will result in a usable input voltage range of perhaps +/- 4 V. What is relevant is the Input Voltage Range which (according to table 6.5 in the TI datasheet: ti.com/lit/ds/symlink/lm741.pdf ) is typically +/- 13 V when a +/- 15 V supply is used.
            – Bimpelrekkie
            Nov 14 at 9:13

















          up vote
          0
          down vote













          All of this information about IC's can be found in the datasheet. In this case look for the Recommended Operating Conditions.
          You will find the following



          operating conditions



          The recommended operating conditions are between +15 and -15V. This does not mean that you can not power it with a lower supply voltage in this case.



          If we look at the Absolute Max operating conditions.
          enter image description here
          You will see that there is no lower limit boundary defined. So the device won't be damaged for using lower voltages and it even has a remark about powering it with lower voltages.
          However there is always a catch to everything. The datasheet defines the following (5) For supply voltages less than ±15 V, the absolute maximum input voltage is equal to the supply voltage This means that if you power the Vsupply+ with 5V and the Vsupply- with -5V your input signal can not exceed this range!



          EDIT



          The UA741 even shows +5V -5V as the minimum for recommended operating conditions.
          enter image description here



          TLDR: Yes +-5V will probably work, Yes you will limit the Vrange of your input signal, Yes there are plenty of "newer" Opamps with +-5V as their Recommended Operating Condition but thats a product request which are not answered on the site.






          share|improve this answer

















          • 1




            Recommended operating conditions do not tell us if the inputs can work up to that range as well. Often a +/- 5 V supply will result in a usable input voltage range of perhaps +/- 4 V. What is relevant is the Input Voltage Range which (according to table 6.5 in the TI datasheet: ti.com/lit/ds/symlink/lm741.pdf ) is typically +/- 13 V when a +/- 15 V supply is used.
            – Bimpelrekkie
            Nov 14 at 9:13















          up vote
          0
          down vote










          up vote
          0
          down vote









          All of this information about IC's can be found in the datasheet. In this case look for the Recommended Operating Conditions.
          You will find the following



          operating conditions



          The recommended operating conditions are between +15 and -15V. This does not mean that you can not power it with a lower supply voltage in this case.



          If we look at the Absolute Max operating conditions.
          enter image description here
          You will see that there is no lower limit boundary defined. So the device won't be damaged for using lower voltages and it even has a remark about powering it with lower voltages.
          However there is always a catch to everything. The datasheet defines the following (5) For supply voltages less than ±15 V, the absolute maximum input voltage is equal to the supply voltage This means that if you power the Vsupply+ with 5V and the Vsupply- with -5V your input signal can not exceed this range!



          EDIT



          The UA741 even shows +5V -5V as the minimum for recommended operating conditions.
          enter image description here



          TLDR: Yes +-5V will probably work, Yes you will limit the Vrange of your input signal, Yes there are plenty of "newer" Opamps with +-5V as their Recommended Operating Condition but thats a product request which are not answered on the site.






          share|improve this answer












          All of this information about IC's can be found in the datasheet. In this case look for the Recommended Operating Conditions.
          You will find the following



          operating conditions



          The recommended operating conditions are between +15 and -15V. This does not mean that you can not power it with a lower supply voltage in this case.



          If we look at the Absolute Max operating conditions.
          enter image description here
          You will see that there is no lower limit boundary defined. So the device won't be damaged for using lower voltages and it even has a remark about powering it with lower voltages.
          However there is always a catch to everything. The datasheet defines the following (5) For supply voltages less than ±15 V, the absolute maximum input voltage is equal to the supply voltage This means that if you power the Vsupply+ with 5V and the Vsupply- with -5V your input signal can not exceed this range!



          EDIT



          The UA741 even shows +5V -5V as the minimum for recommended operating conditions.
          enter image description here



          TLDR: Yes +-5V will probably work, Yes you will limit the Vrange of your input signal, Yes there are plenty of "newer" Opamps with +-5V as their Recommended Operating Condition but thats a product request which are not answered on the site.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered Nov 14 at 7:36









          Remco Vink

          637313




          637313








          • 1




            Recommended operating conditions do not tell us if the inputs can work up to that range as well. Often a +/- 5 V supply will result in a usable input voltage range of perhaps +/- 4 V. What is relevant is the Input Voltage Range which (according to table 6.5 in the TI datasheet: ti.com/lit/ds/symlink/lm741.pdf ) is typically +/- 13 V when a +/- 15 V supply is used.
            – Bimpelrekkie
            Nov 14 at 9:13
















          • 1




            Recommended operating conditions do not tell us if the inputs can work up to that range as well. Often a +/- 5 V supply will result in a usable input voltage range of perhaps +/- 4 V. What is relevant is the Input Voltage Range which (according to table 6.5 in the TI datasheet: ti.com/lit/ds/symlink/lm741.pdf ) is typically +/- 13 V when a +/- 15 V supply is used.
            – Bimpelrekkie
            Nov 14 at 9:13










          1




          1




          Recommended operating conditions do not tell us if the inputs can work up to that range as well. Often a +/- 5 V supply will result in a usable input voltage range of perhaps +/- 4 V. What is relevant is the Input Voltage Range which (according to table 6.5 in the TI datasheet: ti.com/lit/ds/symlink/lm741.pdf ) is typically +/- 13 V when a +/- 15 V supply is used.
          – Bimpelrekkie
          Nov 14 at 9:13






          Recommended operating conditions do not tell us if the inputs can work up to that range as well. Often a +/- 5 V supply will result in a usable input voltage range of perhaps +/- 4 V. What is relevant is the Input Voltage Range which (according to table 6.5 in the TI datasheet: ti.com/lit/ds/symlink/lm741.pdf ) is typically +/- 13 V when a +/- 15 V supply is used.
          – Bimpelrekkie
          Nov 14 at 9:13












          up vote
          -1
          down vote













          If you mean with input voltage the supply voltage, yes. an LM741 is specified for +-22V (or +-18V)Supply voltage.



          If you mean the input voltage on the input pins, also yes. If it is supplied with at least +-5V.



          Have a look at the absolute maximum ratings table in the datasheet on page 4.
          enter image description here






          share|improve this answer

















          • 5




            Ahem, you're referring to the maximum ratings, these are the voltages that do not damage the opamp. These numbers do not say anything about the opamp actually working. Instead of maximum ratings, use operating conditions.
            – Bimpelrekkie
            Nov 14 at 7:31

















          up vote
          -1
          down vote













          If you mean with input voltage the supply voltage, yes. an LM741 is specified for +-22V (or +-18V)Supply voltage.



          If you mean the input voltage on the input pins, also yes. If it is supplied with at least +-5V.



          Have a look at the absolute maximum ratings table in the datasheet on page 4.
          enter image description here






          share|improve this answer

















          • 5




            Ahem, you're referring to the maximum ratings, these are the voltages that do not damage the opamp. These numbers do not say anything about the opamp actually working. Instead of maximum ratings, use operating conditions.
            – Bimpelrekkie
            Nov 14 at 7:31















          up vote
          -1
          down vote










          up vote
          -1
          down vote









          If you mean with input voltage the supply voltage, yes. an LM741 is specified for +-22V (or +-18V)Supply voltage.



          If you mean the input voltage on the input pins, also yes. If it is supplied with at least +-5V.



          Have a look at the absolute maximum ratings table in the datasheet on page 4.
          enter image description here






          share|improve this answer












          If you mean with input voltage the supply voltage, yes. an LM741 is specified for +-22V (or +-18V)Supply voltage.



          If you mean the input voltage on the input pins, also yes. If it is supplied with at least +-5V.



          Have a look at the absolute maximum ratings table in the datasheet on page 4.
          enter image description here







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered Nov 14 at 7:23









          Sorkfa

          197




          197








          • 5




            Ahem, you're referring to the maximum ratings, these are the voltages that do not damage the opamp. These numbers do not say anything about the opamp actually working. Instead of maximum ratings, use operating conditions.
            – Bimpelrekkie
            Nov 14 at 7:31
















          • 5




            Ahem, you're referring to the maximum ratings, these are the voltages that do not damage the opamp. These numbers do not say anything about the opamp actually working. Instead of maximum ratings, use operating conditions.
            – Bimpelrekkie
            Nov 14 at 7:31










          5




          5




          Ahem, you're referring to the maximum ratings, these are the voltages that do not damage the opamp. These numbers do not say anything about the opamp actually working. Instead of maximum ratings, use operating conditions.
          – Bimpelrekkie
          Nov 14 at 7:31






          Ahem, you're referring to the maximum ratings, these are the voltages that do not damage the opamp. These numbers do not say anything about the opamp actually working. Instead of maximum ratings, use operating conditions.
          – Bimpelrekkie
          Nov 14 at 7:31












          Rumesh Madhusanka is a new contributor. Be nice, and check out our Code of Conduct.










           

          draft saved


          draft discarded


















          Rumesh Madhusanka is a new contributor. Be nice, and check out our Code of Conduct.













          Rumesh Madhusanka is a new contributor. Be nice, and check out our Code of Conduct.












          Rumesh Madhusanka is a new contributor. Be nice, and check out our Code of Conduct.















           


          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f406694%2fopamp-which-works-with-5-v-input%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          Plaza Victoria

          Puebla de Zaragoza

          Musa