Remotely viewing IP camera on Belkin N450 DB router












0














I need to setup a wireless IP camera (Trendnet TV-IP501W) on my network so that it is remotely visible from anywhere. Right now I successfully connected it to my home network but nothing else. My router is a Belkin N450 DB.



Any help would be much appreciated, including what this would be referred to as so I could more easily ask another forum. I believe it is something like "port forwarding" but I'm not sure.





Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port.
In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private.



I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?





Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port.
In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private.



I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?










share|improve this question















migrated from serverfault.com Feb 18 '12 at 23:22


This question came from our site for system and network administrators.











  • 1




    Mike, we reset the ownership of this post to your account, so you can now edit it to add more information. You should register your account permanently so that in the future, you will always have access to your questions no matter where you log in from.
    – nhinkle
    Feb 21 '12 at 22:44
















0














I need to setup a wireless IP camera (Trendnet TV-IP501W) on my network so that it is remotely visible from anywhere. Right now I successfully connected it to my home network but nothing else. My router is a Belkin N450 DB.



Any help would be much appreciated, including what this would be referred to as so I could more easily ask another forum. I believe it is something like "port forwarding" but I'm not sure.





Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port.
In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private.



I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?





Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port.
In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private.



I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?










share|improve this question















migrated from serverfault.com Feb 18 '12 at 23:22


This question came from our site for system and network administrators.











  • 1




    Mike, we reset the ownership of this post to your account, so you can now edit it to add more information. You should register your account permanently so that in the future, you will always have access to your questions no matter where you log in from.
    – nhinkle
    Feb 21 '12 at 22:44














0












0








0







I need to setup a wireless IP camera (Trendnet TV-IP501W) on my network so that it is remotely visible from anywhere. Right now I successfully connected it to my home network but nothing else. My router is a Belkin N450 DB.



Any help would be much appreciated, including what this would be referred to as so I could more easily ask another forum. I believe it is something like "port forwarding" but I'm not sure.





Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port.
In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private.



I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?





Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port.
In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private.



I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?










share|improve this question















I need to setup a wireless IP camera (Trendnet TV-IP501W) on my network so that it is remotely visible from anywhere. Right now I successfully connected it to my home network but nothing else. My router is a Belkin N450 DB.



Any help would be much appreciated, including what this would be referred to as so I could more easily ask another forum. I believe it is something like "port forwarding" but I'm not sure.





Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port.
In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private.



I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?





Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port.
In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private.



I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?







router ip camera






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Feb 8 '16 at 18:04









Hennes

58.8k792141




58.8k792141










asked Feb 18 '12 at 23:17









Mike Miller

111




111




migrated from serverfault.com Feb 18 '12 at 23:22


This question came from our site for system and network administrators.






migrated from serverfault.com Feb 18 '12 at 23:22


This question came from our site for system and network administrators.










  • 1




    Mike, we reset the ownership of this post to your account, so you can now edit it to add more information. You should register your account permanently so that in the future, you will always have access to your questions no matter where you log in from.
    – nhinkle
    Feb 21 '12 at 22:44














  • 1




    Mike, we reset the ownership of this post to your account, so you can now edit it to add more information. You should register your account permanently so that in the future, you will always have access to your questions no matter where you log in from.
    – nhinkle
    Feb 21 '12 at 22:44








1




1




Mike, we reset the ownership of this post to your account, so you can now edit it to add more information. You should register your account permanently so that in the future, you will always have access to your questions no matter where you log in from.
– nhinkle
Feb 21 '12 at 22:44




Mike, we reset the ownership of this post to your account, so you can now edit it to add more information. You should register your account permanently so that in the future, you will always have access to your questions no matter where you log in from.
– nhinkle
Feb 21 '12 at 22:44










1 Answer
1






active

oldest

votes


















0














Port Forwarding or Single Port Forwarding. You probably want to give the camera a static IP address. On the router the port forwarding tab will have fields for: Application - create a new application 'Camera', Set External Port No to an unused Port Number, 81 will do, Set Internal Port No to whatever your camera uses, probably 80. Set the internal IP address to the static IP you have assigned the camera. To connect from a web browser external to your network you will need your router IP (or dyndns address) followed by :81 - so assuming your router was 104.68.44.5 you stick 104.68.44.5:81 in the browser address bar. At your router anything trying to connect to port 81 gets connected to port 80 on the internal IP you specified.






share|improve this answer




















    protected by JakeGould Nov 23 '15 at 4:00



    Thank you for your interest in this question.
    Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).



    Would you like to answer one of these unanswered questions instead?














    1 Answer
    1






    active

    oldest

    votes








    1 Answer
    1






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    0














    Port Forwarding or Single Port Forwarding. You probably want to give the camera a static IP address. On the router the port forwarding tab will have fields for: Application - create a new application 'Camera', Set External Port No to an unused Port Number, 81 will do, Set Internal Port No to whatever your camera uses, probably 80. Set the internal IP address to the static IP you have assigned the camera. To connect from a web browser external to your network you will need your router IP (or dyndns address) followed by :81 - so assuming your router was 104.68.44.5 you stick 104.68.44.5:81 in the browser address bar. At your router anything trying to connect to port 81 gets connected to port 80 on the internal IP you specified.






    share|improve this answer


























      0














      Port Forwarding or Single Port Forwarding. You probably want to give the camera a static IP address. On the router the port forwarding tab will have fields for: Application - create a new application 'Camera', Set External Port No to an unused Port Number, 81 will do, Set Internal Port No to whatever your camera uses, probably 80. Set the internal IP address to the static IP you have assigned the camera. To connect from a web browser external to your network you will need your router IP (or dyndns address) followed by :81 - so assuming your router was 104.68.44.5 you stick 104.68.44.5:81 in the browser address bar. At your router anything trying to connect to port 81 gets connected to port 80 on the internal IP you specified.






      share|improve this answer
























        0












        0








        0






        Port Forwarding or Single Port Forwarding. You probably want to give the camera a static IP address. On the router the port forwarding tab will have fields for: Application - create a new application 'Camera', Set External Port No to an unused Port Number, 81 will do, Set Internal Port No to whatever your camera uses, probably 80. Set the internal IP address to the static IP you have assigned the camera. To connect from a web browser external to your network you will need your router IP (or dyndns address) followed by :81 - so assuming your router was 104.68.44.5 you stick 104.68.44.5:81 in the browser address bar. At your router anything trying to connect to port 81 gets connected to port 80 on the internal IP you specified.






        share|improve this answer












        Port Forwarding or Single Port Forwarding. You probably want to give the camera a static IP address. On the router the port forwarding tab will have fields for: Application - create a new application 'Camera', Set External Port No to an unused Port Number, 81 will do, Set Internal Port No to whatever your camera uses, probably 80. Set the internal IP address to the static IP you have assigned the camera. To connect from a web browser external to your network you will need your router IP (or dyndns address) followed by :81 - so assuming your router was 104.68.44.5 you stick 104.68.44.5:81 in the browser address bar. At your router anything trying to connect to port 81 gets connected to port 80 on the internal IP you specified.







        share|improve this answer












        share|improve this answer



        share|improve this answer










        answered Feb 19 '12 at 0:56









        BJ292

        1,9851111




        1,9851111

















            protected by JakeGould Nov 23 '15 at 4:00



            Thank you for your interest in this question.
            Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).



            Would you like to answer one of these unanswered questions instead?



            Popular posts from this blog

            Plaza Victoria

            Puebla de Zaragoza

            Musa