Is it safe leaving monitors turned on (stand by) or could it harm the devices
up vote
0
down vote
favorite
I was wondering if I could leave my monitors turned on after I’ve turned off my pc, here are some other questions I had:
Does the yellow status LED always suggest the monitor is in standby mode? Every time I turn on the monitor without turning in my computer the light is yellow instead of green or blue respectively. Does that mean it automatically turns into stand by?
i have one 144hz BenQ led lcd monitor which lights up green in use and yellow when my pc is turned off and an old lg lcd with a mercury containing ccfl tube which usually lights up blue I think and if my pc is turned off yellow, not sure If that’s important
display lcd led
asked Nov 21 at 0:01
kyloehre1
11
add a comment |
up vote
0
down vote
favorite
I was wondering if I could leave my monitors turned on after I’ve turned off my pc, here are some other questions I had:
Does the yellow status LED always suggest the monitor is in standby mode? Every time I turn on the monitor without turning in my computer the light is yellow instead of green or blue respectively. Does that mean it automatically turns into stand by?
i have one 144hz BenQ led lcd monitor which lights up green in use and yellow when my pc is turned off and an old lg lcd with a mercury containing ccfl tube which usually lights up blue I think and if my pc is turned off yellow, not sure If that’s important
display lcd led
asked Nov 21 at 0:01
kyloehre1
11
Good questions. Please put them into a cardinal (numbered) list on new lines. Please use good grammar and reduce the extra comments. Please put the monitor make/model on the first line of the question (and if you have any other monitors, their make/model as well).
– Christopher Hostage
Nov 21 at 0:17
add a comment |
up vote
0
down vote
favorite
up vote
0
down vote
favorite
I was wondering if I could leave my monitors turned on after I’ve turned off my pc, here are some other questions I had:
Does the yellow status LED always suggest the monitor is in standby mode? Every time I turn on the monitor without turning in my computer the light is yellow instead of green or blue respectively. Does that mean it automatically turns into stand by?
i have one 144hz BenQ led lcd monitor which lights up green in use and yellow when my pc is turned off and an old lg lcd with a mercury containing ccfl tube which usually lights up blue I think and if my pc is turned off yellow, not sure If that’s important
display lcd led
asked Nov 21 at 0:01
kyloehre1
11
I was wondering if I could leave my monitors turned on after I’ve turned off my pc, here are some other questions I had:
Does the yellow status LED always suggest the monitor is in standby mode? Every time I turn on the monitor without turning in my computer the light is yellow instead of green or blue respectively. Does that mean it automatically turns into stand by?
i have one 144hz BenQ led lcd monitor which lights up green in use and yellow when my pc is turned off and an old lg lcd with a mercury containing ccfl tube which usually lights up blue I think and if my pc is turned off yellow, not sure If that’s important
display lcd led
display lcd led
asked Nov 21 at 0:01
kyloehre1
11
asked Nov 21 at 0:01
kyloehre1
11
asked Nov 21 at 0:01
kyloehre1
11
asked Nov 21 at 0:01
kyloehre1
11
asked Nov 21 at 0:01
kyloehre1
11
11
Good questions. Please put them into a cardinal (numbered) list on new lines. Please use good grammar and reduce the extra comments. Please put the monitor make/model on the first line of the question (and if you have any other monitors, their make/model as well).
– Christopher Hostage
Nov 21 at 0:17
add a comment |
Good questions. Please put them into a cardinal (numbered) list on new lines. Please use good grammar and reduce the extra comments. Please put the monitor make/model on the first line of the question (and if you have any other monitors, their make/model as well).
– Christopher Hostage
Nov 21 at 0:17
Good questions. Please put them into a cardinal (numbered) list on new lines. Please use good grammar and reduce the extra comments. Please put the monitor make/model on the first line of the question (and if you have any other monitors, their make/model as well).
– Christopher Hostage
Nov 21 at 0:17
Good questions. Please put them into a cardinal (numbered) list on new lines. Please use good grammar and reduce the extra comments. Please put the monitor make/model on the first line of the question (and if you have any other monitors, their make/model as well).
– Christopher Hostage
Nov 21 at 0:17
add a comment |
2 Answers
2
active
oldest
votes
up vote
0
down vote
Yes it is normal. The Monitor operates normally upon operating the PC device itself. Usually LEDs have a living time of 5 years before starting to mis-operate and die !!!
answered Nov 21 at 0:20
Imad
11
1
Though LEDs are generally rated to last 50,000 hours (5.7 years), I have never had an issue with a LED power light on a monitor going out. I guess I'll see if one of mine goes out within the year. I've had it for 5 years and the light is always on. I've had my other monitor for 8 years and it's still going too. But that power LED flashes every few seconds when it's on standby.
– DrZoo
Nov 21 at 4:41
remember that the lifetime is for a full duty cycle - or operating at 100%. If an LED is running at a lower voltage or is pulse width modulated to a less intense output - it's going to last longer.
– Baldrickk
Nov 21 at 11:32
add a comment |
up vote
0
down vote
It is fine to leave them on. I always leave mine on and doing so has caused no harm.
The different colors are used to help troubleshoot problems, if something occurs. The one color shows it has power, but is not receiving video input. The other is when it is powered on and receiving input.
When the power is supplied to the monitor, and it is on but not receiving video input, the status light will be one color or flashing pattern. In your case, these colors seem to be a solid orange and yellow.
When you turn on your PC, or wake it, your monitor will receive video input and the LED will turn a different color, or stop flashing. In your case this seems to be green and blue.
The LED color or flashing pattern is unique to each monitor. I have one that has a flashing red when in standby mode, and a solid red light when it receives video input. My other monitor has an orange LED when in standby, and a blue light when it is receiving input.
answered Nov 21 at 4:27
DrZoo
5,55711636
add a comment |
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
Yes it is normal. The Monitor operates normally upon operating the PC device itself. Usually LEDs have a living time of 5 years before starting to mis-operate and die !!!
answered Nov 21 at 0:20
Imad
11
1
Though LEDs are generally rated to last 50,000 hours (5.7 years), I have never had an issue with a LED power light on a monitor going out. I guess I'll see if one of mine goes out within the year. I've had it for 5 years and the light is always on. I've had my other monitor for 8 years and it's still going too. But that power LED flashes every few seconds when it's on standby.
– DrZoo
Nov 21 at 4:41
remember that the lifetime is for a full duty cycle - or operating at 100%. If an LED is running at a lower voltage or is pulse width modulated to a less intense output - it's going to last longer.
– Baldrickk
Nov 21 at 11:32
add a comment |
up vote
0
down vote
Yes it is normal. The Monitor operates normally upon operating the PC device itself. Usually LEDs have a living time of 5 years before starting to mis-operate and die !!!
answered Nov 21 at 0:20
Imad
11
1
Though LEDs are generally rated to last 50,000 hours (5.7 years), I have never had an issue with a LED power light on a monitor going out. I guess I'll see if one of mine goes out within the year. I've had it for 5 years and the light is always on. I've had my other monitor for 8 years and it's still going too. But that power LED flashes every few seconds when it's on standby.
– DrZoo
Nov 21 at 4:41
remember that the lifetime is for a full duty cycle - or operating at 100%. If an LED is running at a lower voltage or is pulse width modulated to a less intense output - it's going to last longer.
– Baldrickk
Nov 21 at 11:32
add a comment |
up vote
0
down vote
up vote
0
down vote
Yes it is normal. The Monitor operates normally upon operating the PC device itself. Usually LEDs have a living time of 5 years before starting to mis-operate and die !!!
answered Nov 21 at 0:20
Imad
11
Yes it is normal. The Monitor operates normally upon operating the PC device itself. Usually LEDs have a living time of 5 years before starting to mis-operate and die !!!
answered Nov 21 at 0:20
Imad
11
answered Nov 21 at 0:20
Imad
11
answered Nov 21 at 0:20
Imad
11
answered Nov 21 at 0:20
Imad
11
11
1
Though LEDs are generally rated to last 50,000 hours (5.7 years), I have never had an issue with a LED power light on a monitor going out. I guess I'll see if one of mine goes out within the year. I've had it for 5 years and the light is always on. I've had my other monitor for 8 years and it's still going too. But that power LED flashes every few seconds when it's on standby.
– DrZoo
Nov 21 at 4:41
remember that the lifetime is for a full duty cycle - or operating at 100%. If an LED is running at a lower voltage or is pulse width modulated to a less intense output - it's going to last longer.
– Baldrickk
Nov 21 at 11:32
add a comment |
1
Though LEDs are generally rated to last 50,000 hours (5.7 years), I have never had an issue with a LED power light on a monitor going out. I guess I'll see if one of mine goes out within the year. I've had it for 5 years and the light is always on. I've had my other monitor for 8 years and it's still going too. But that power LED flashes every few seconds when it's on standby.
– DrZoo
Nov 21 at 4:41
remember that the lifetime is for a full duty cycle - or operating at 100%. If an LED is running at a lower voltage or is pulse width modulated to a less intense output - it's going to last longer.
– Baldrickk
Nov 21 at 11:32
1
1
Though LEDs are generally rated to last 50,000 hours (5.7 years), I have never had an issue with a LED power light on a monitor going out. I guess I'll see if one of mine goes out within the year. I've had it for 5 years and the light is always on. I've had my other monitor for 8 years and it's still going too. But that power LED flashes every few seconds when it's on standby.
– DrZoo
Nov 21 at 4:41
Though LEDs are generally rated to last 50,000 hours (5.7 years), I have never had an issue with a LED power light on a monitor going out. I guess I'll see if one of mine goes out within the year. I've had it for 5 years and the light is always on. I've had my other monitor for 8 years and it's still going too. But that power LED flashes every few seconds when it's on standby.
– DrZoo
Nov 21 at 4:41
remember that the lifetime is for a full duty cycle - or operating at 100%. If an LED is running at a lower voltage or is pulse width modulated to a less intense output - it's going to last longer.
– Baldrickk
Nov 21 at 11:32
remember that the lifetime is for a full duty cycle - or operating at 100%. If an LED is running at a lower voltage or is pulse width modulated to a less intense output - it's going to last longer.
– Baldrickk
Nov 21 at 11:32
add a comment |
up vote
0
down vote
It is fine to leave them on. I always leave mine on and doing so has caused no harm.
The different colors are used to help troubleshoot problems, if something occurs. The one color shows it has power, but is not receiving video input. The other is when it is powered on and receiving input.
When the power is supplied to the monitor, and it is on but not receiving video input, the status light will be one color or flashing pattern. In your case, these colors seem to be a solid orange and yellow.
When you turn on your PC, or wake it, your monitor will receive video input and the LED will turn a different color, or stop flashing. In your case this seems to be green and blue.
The LED color or flashing pattern is unique to each monitor. I have one that has a flashing red when in standby mode, and a solid red light when it receives video input. My other monitor has an orange LED when in standby, and a blue light when it is receiving input.
answered Nov 21 at 4:27
DrZoo
5,55711636
add a comment |
up vote
0
down vote
It is fine to leave them on. I always leave mine on and doing so has caused no harm.
The different colors are used to help troubleshoot problems, if something occurs. The one color shows it has power, but is not receiving video input. The other is when it is powered on and receiving input.
When the power is supplied to the monitor, and it is on but not receiving video input, the status light will be one color or flashing pattern. In your case, these colors seem to be a solid orange and yellow.
When you turn on your PC, or wake it, your monitor will receive video input and the LED will turn a different color, or stop flashing. In your case this seems to be green and blue.
The LED color or flashing pattern is unique to each monitor. I have one that has a flashing red when in standby mode, and a solid red light when it receives video input. My other monitor has an orange LED when in standby, and a blue light when it is receiving input.
answered Nov 21 at 4:27
DrZoo
5,55711636
add a comment |
up vote
0
down vote
up vote
0
down vote
It is fine to leave them on. I always leave mine on and doing so has caused no harm.
The different colors are used to help troubleshoot problems, if something occurs. The one color shows it has power, but is not receiving video input. The other is when it is powered on and receiving input.
When the power is supplied to the monitor, and it is on but not receiving video input, the status light will be one color or flashing pattern. In your case, these colors seem to be a solid orange and yellow.
When you turn on your PC, or wake it, your monitor will receive video input and the LED will turn a different color, or stop flashing. In your case this seems to be green and blue.
The LED color or flashing pattern is unique to each monitor. I have one that has a flashing red when in standby mode, and a solid red light when it receives video input. My other monitor has an orange LED when in standby, and a blue light when it is receiving input.
answered Nov 21 at 4:27
DrZoo
5,55711636
It is fine to leave them on. I always leave mine on and doing so has caused no harm.
The different colors are used to help troubleshoot problems, if something occurs. The one color shows it has power, but is not receiving video input. The other is when it is powered on and receiving input.
When the power is supplied to the monitor, and it is on but not receiving video input, the status light will be one color or flashing pattern. In your case, these colors seem to be a solid orange and yellow.
When you turn on your PC, or wake it, your monitor will receive video input and the LED will turn a different color, or stop flashing. In your case this seems to be green and blue.
The LED color or flashing pattern is unique to each monitor. I have one that has a flashing red when in standby mode, and a solid red light when it receives video input. My other monitor has an orange LED when in standby, and a blue light when it is receiving input.
answered Nov 21 at 4:27
DrZoo
5,55711636
answered Nov 21 at 4:27
DrZoo
5,55711636
answered Nov 21 at 4:27
DrZoo
5,55711636
answered Nov 21 at 4:27
DrZoo
5,55711636
5,55711636
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1377136%2fis-it-safe-leaving-monitors-turned-on-stand-by-or-could-it-harm-the-devices%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Good questions. Please put them into a cardinal (numbered) list on new lines. Please use good grammar and reduce the extra comments. Please put the monitor make/model on the first line of the question (and if you have any other monitors, their make/model as well).
– Christopher Hostage
Nov 21 at 0:17