dual boot windows 10 from a different pc's hdd
I had my old pc dual book windows xp and windows 8
Windows xp was on different hard disk
WIndows 8 was on a ssd
Now I removed windows8 ssd, and istalled it on aanother machinw which already has win10 installed.
I boot but I dont see the dual boot message. Do I need to reinstall it? Or there is a quick fix to make it load that windows 8 as dual boot on current machine.
Im out of space to try to make a fresh install
windows-10 windows-8 windows-xp ssd
add a comment |
I had my old pc dual book windows xp and windows 8
Windows xp was on different hard disk
WIndows 8 was on a ssd
Now I removed windows8 ssd, and istalled it on aanother machinw which already has win10 installed.
I boot but I dont see the dual boot message. Do I need to reinstall it? Or there is a quick fix to make it load that windows 8 as dual boot on current machine.
Im out of space to try to make a fresh install
windows-10 windows-8 windows-xp ssd
add a comment |
I had my old pc dual book windows xp and windows 8
Windows xp was on different hard disk
WIndows 8 was on a ssd
Now I removed windows8 ssd, and istalled it on aanother machinw which already has win10 installed.
I boot but I dont see the dual boot message. Do I need to reinstall it? Or there is a quick fix to make it load that windows 8 as dual boot on current machine.
Im out of space to try to make a fresh install
windows-10 windows-8 windows-xp ssd
I had my old pc dual book windows xp and windows 8
Windows xp was on different hard disk
WIndows 8 was on a ssd
Now I removed windows8 ssd, and istalled it on aanother machinw which already has win10 installed.
I boot but I dont see the dual boot message. Do I need to reinstall it? Or there is a quick fix to make it load that windows 8 as dual boot on current machine.
Im out of space to try to make a fresh install
windows-10 windows-8 windows-xp ssd
windows-10 windows-8 windows-xp ssd
asked Jan 16 at 14:38
inrobinrob
1011
1011
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
The only way to try and transfer from an old machine to new is to use the Sysprep tool:
If you do a fresh install, you have 3 options.
- Insert both hard drives and find which hard drive the system boots into.
- The OS which gets booted will be managing the bootloader for the system.
- Download EasyBCD, or something similar, of your choice if you can find it. Then install it on the main booted drive. EasyBCD can be found here.
Figure out what key will allow you to select the OS during boot... ESC, F2, F9, etc. This will bring up the drives installed and allows a selection.
Manually select boot order in BIOS/UEFI.
Will the other windows boot correctly even if it was installed on another system?
– inrob
Jan 16 at 14:52
@inrob Most likely it won't for two reasons: 1) Windows is very picky about drivers and stuff and not designed for portability (actually that isn't even allowed except with the Windows to Go feature) and 2) BIOS (legacy) boot and UEFI boot are very different; if it boots in one mode it won't in the other.
– GabrielaGarcia
Jan 16 at 14:57
If you get the BIOS setup properly it may. You HAVE to Sysprep the machine using the /generalize switch before transferring it. Windows will then set itself back up on the new hardware. It can be a big pita to move to a completely new system, unfortunately. More than likely you will have to call Microsoft about activation. There is some more info on Sysprep here: docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/…
– Ethan K.
Jan 16 at 14:58
Not worth if for me, id rather buy a cheap ssd than do all that
– inrob
Jan 16 at 15:41
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1394970%2fdual-boot-windows-10-from-a-different-pcs-hdd%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
The only way to try and transfer from an old machine to new is to use the Sysprep tool:
If you do a fresh install, you have 3 options.
- Insert both hard drives and find which hard drive the system boots into.
- The OS which gets booted will be managing the bootloader for the system.
- Download EasyBCD, or something similar, of your choice if you can find it. Then install it on the main booted drive. EasyBCD can be found here.
Figure out what key will allow you to select the OS during boot... ESC, F2, F9, etc. This will bring up the drives installed and allows a selection.
Manually select boot order in BIOS/UEFI.
Will the other windows boot correctly even if it was installed on another system?
– inrob
Jan 16 at 14:52
@inrob Most likely it won't for two reasons: 1) Windows is very picky about drivers and stuff and not designed for portability (actually that isn't even allowed except with the Windows to Go feature) and 2) BIOS (legacy) boot and UEFI boot are very different; if it boots in one mode it won't in the other.
– GabrielaGarcia
Jan 16 at 14:57
If you get the BIOS setup properly it may. You HAVE to Sysprep the machine using the /generalize switch before transferring it. Windows will then set itself back up on the new hardware. It can be a big pita to move to a completely new system, unfortunately. More than likely you will have to call Microsoft about activation. There is some more info on Sysprep here: docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/…
– Ethan K.
Jan 16 at 14:58
Not worth if for me, id rather buy a cheap ssd than do all that
– inrob
Jan 16 at 15:41
add a comment |
The only way to try and transfer from an old machine to new is to use the Sysprep tool:
If you do a fresh install, you have 3 options.
- Insert both hard drives and find which hard drive the system boots into.
- The OS which gets booted will be managing the bootloader for the system.
- Download EasyBCD, or something similar, of your choice if you can find it. Then install it on the main booted drive. EasyBCD can be found here.
Figure out what key will allow you to select the OS during boot... ESC, F2, F9, etc. This will bring up the drives installed and allows a selection.
Manually select boot order in BIOS/UEFI.
Will the other windows boot correctly even if it was installed on another system?
– inrob
Jan 16 at 14:52
@inrob Most likely it won't for two reasons: 1) Windows is very picky about drivers and stuff and not designed for portability (actually that isn't even allowed except with the Windows to Go feature) and 2) BIOS (legacy) boot and UEFI boot are very different; if it boots in one mode it won't in the other.
– GabrielaGarcia
Jan 16 at 14:57
If you get the BIOS setup properly it may. You HAVE to Sysprep the machine using the /generalize switch before transferring it. Windows will then set itself back up on the new hardware. It can be a big pita to move to a completely new system, unfortunately. More than likely you will have to call Microsoft about activation. There is some more info on Sysprep here: docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/…
– Ethan K.
Jan 16 at 14:58
Not worth if for me, id rather buy a cheap ssd than do all that
– inrob
Jan 16 at 15:41
add a comment |
The only way to try and transfer from an old machine to new is to use the Sysprep tool:
If you do a fresh install, you have 3 options.
- Insert both hard drives and find which hard drive the system boots into.
- The OS which gets booted will be managing the bootloader for the system.
- Download EasyBCD, or something similar, of your choice if you can find it. Then install it on the main booted drive. EasyBCD can be found here.
Figure out what key will allow you to select the OS during boot... ESC, F2, F9, etc. This will bring up the drives installed and allows a selection.
Manually select boot order in BIOS/UEFI.
The only way to try and transfer from an old machine to new is to use the Sysprep tool:
If you do a fresh install, you have 3 options.
- Insert both hard drives and find which hard drive the system boots into.
- The OS which gets booted will be managing the bootloader for the system.
- Download EasyBCD, or something similar, of your choice if you can find it. Then install it on the main booted drive. EasyBCD can be found here.
Figure out what key will allow you to select the OS during boot... ESC, F2, F9, etc. This will bring up the drives installed and allows a selection.
Manually select boot order in BIOS/UEFI.
edited Jan 16 at 19:19
zx485
977813
977813
answered Jan 16 at 14:49
Ethan K.Ethan K.
114
114
Will the other windows boot correctly even if it was installed on another system?
– inrob
Jan 16 at 14:52
@inrob Most likely it won't for two reasons: 1) Windows is very picky about drivers and stuff and not designed for portability (actually that isn't even allowed except with the Windows to Go feature) and 2) BIOS (legacy) boot and UEFI boot are very different; if it boots in one mode it won't in the other.
– GabrielaGarcia
Jan 16 at 14:57
If you get the BIOS setup properly it may. You HAVE to Sysprep the machine using the /generalize switch before transferring it. Windows will then set itself back up on the new hardware. It can be a big pita to move to a completely new system, unfortunately. More than likely you will have to call Microsoft about activation. There is some more info on Sysprep here: docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/…
– Ethan K.
Jan 16 at 14:58
Not worth if for me, id rather buy a cheap ssd than do all that
– inrob
Jan 16 at 15:41
add a comment |
Will the other windows boot correctly even if it was installed on another system?
– inrob
Jan 16 at 14:52
@inrob Most likely it won't for two reasons: 1) Windows is very picky about drivers and stuff and not designed for portability (actually that isn't even allowed except with the Windows to Go feature) and 2) BIOS (legacy) boot and UEFI boot are very different; if it boots in one mode it won't in the other.
– GabrielaGarcia
Jan 16 at 14:57
If you get the BIOS setup properly it may. You HAVE to Sysprep the machine using the /generalize switch before transferring it. Windows will then set itself back up on the new hardware. It can be a big pita to move to a completely new system, unfortunately. More than likely you will have to call Microsoft about activation. There is some more info on Sysprep here: docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/…
– Ethan K.
Jan 16 at 14:58
Not worth if for me, id rather buy a cheap ssd than do all that
– inrob
Jan 16 at 15:41
Will the other windows boot correctly even if it was installed on another system?
– inrob
Jan 16 at 14:52
Will the other windows boot correctly even if it was installed on another system?
– inrob
Jan 16 at 14:52
@inrob Most likely it won't for two reasons: 1) Windows is very picky about drivers and stuff and not designed for portability (actually that isn't even allowed except with the Windows to Go feature) and 2) BIOS (legacy) boot and UEFI boot are very different; if it boots in one mode it won't in the other.
– GabrielaGarcia
Jan 16 at 14:57
@inrob Most likely it won't for two reasons: 1) Windows is very picky about drivers and stuff and not designed for portability (actually that isn't even allowed except with the Windows to Go feature) and 2) BIOS (legacy) boot and UEFI boot are very different; if it boots in one mode it won't in the other.
– GabrielaGarcia
Jan 16 at 14:57
If you get the BIOS setup properly it may. You HAVE to Sysprep the machine using the /generalize switch before transferring it. Windows will then set itself back up on the new hardware. It can be a big pita to move to a completely new system, unfortunately. More than likely you will have to call Microsoft about activation. There is some more info on Sysprep here: docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/…
– Ethan K.
Jan 16 at 14:58
If you get the BIOS setup properly it may. You HAVE to Sysprep the machine using the /generalize switch before transferring it. Windows will then set itself back up on the new hardware. It can be a big pita to move to a completely new system, unfortunately. More than likely you will have to call Microsoft about activation. There is some more info on Sysprep here: docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/…
– Ethan K.
Jan 16 at 14:58
Not worth if for me, id rather buy a cheap ssd than do all that
– inrob
Jan 16 at 15:41
Not worth if for me, id rather buy a cheap ssd than do all that
– inrob
Jan 16 at 15:41
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1394970%2fdual-boot-windows-10-from-a-different-pcs-hdd%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown