Install Windows 10 on SSD through SATA to USB?
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ height:90px;width:728px;box-sizing:border-box;
}
I am stuck with a weird problem here. I am trying to install Windows 10 on an "old" Windows 7 desktop machine for a friend. I purchased an SSD for him, but when I try to install Windows through USB it says:
We couldn't create a new partition or locate an existing one. For more information, see the Setup log files
I have tried:
- Converting the drive to MBR and GPT
- Diskpart -> clean -> create new primary partition -> mark as active
- Remove all CD, SD, etc. drives from the motherboard (they don't appear in BIOS)
- New SATA cable
- Plug SSD into USB adapter and partition the drive on my desktop and mark it as active
However, none of these worked out for me. Very weird. Therefore I want to install Windows on the SSD through USB through my PC. I have a couple of SATA to USB adapters (with power and everything), so the drive basically appears as an USB drive in Windows. How would I go on about installing my Windows ISO on this drive through USB, without screwing up my partitions on my desktop PC?
What I have:
- Windows ISO
- USB adapter to hook up the SSD to my desktop
Let me know what the best approach would be, to solve this issue would be. Thanks!
windows-10 usb ssd
|
show 11 more comments
I am stuck with a weird problem here. I am trying to install Windows 10 on an "old" Windows 7 desktop machine for a friend. I purchased an SSD for him, but when I try to install Windows through USB it says:
We couldn't create a new partition or locate an existing one. For more information, see the Setup log files
I have tried:
- Converting the drive to MBR and GPT
- Diskpart -> clean -> create new primary partition -> mark as active
- Remove all CD, SD, etc. drives from the motherboard (they don't appear in BIOS)
- New SATA cable
- Plug SSD into USB adapter and partition the drive on my desktop and mark it as active
However, none of these worked out for me. Very weird. Therefore I want to install Windows on the SSD through USB through my PC. I have a couple of SATA to USB adapters (with power and everything), so the drive basically appears as an USB drive in Windows. How would I go on about installing my Windows ISO on this drive through USB, without screwing up my partitions on my desktop PC?
What I have:
- Windows ISO
- USB adapter to hook up the SSD to my desktop
Let me know what the best approach would be, to solve this issue would be. Thanks!
windows-10 usb ssd
What’s the rationale behind this whole undertaking? Is the laptop not capable of booting from USB, so you could create a thumb drive containing Windows Setup?
– Daniel B
Apr 30 '16 at 12:40
Why don't you just clone the existing install to the SSD, swap drives, deal with re-authenticating at MS, then do a regular upgrade.
– Tetsujin
Apr 30 '16 at 12:41
@DanielB Read the post again. I get the error "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files" and I have tried basically everything to make the new SSD and old HDD work.
– MortenMoulder
Apr 30 '16 at 12:41
@Tetsujin Because the old HDD has been erased. I need to start from scratch.
– MortenMoulder
Apr 30 '16 at 12:42
Then the description 'old Win7 machine' is incorrect - right now it's just 'a machine' ;) If you can force an OS onto a USB drive [difficult as you need an Enterprise license to be able to install WinToGo] then it would very likely fail to boot when you put it back in the first machine, unless you have something like Acronis Universal Restore, which can 'de-specify' a boot drive. How did you generate your 'Windows ISO'? Media Creator?
– Tetsujin
Apr 30 '16 at 12:48
|
show 11 more comments
I am stuck with a weird problem here. I am trying to install Windows 10 on an "old" Windows 7 desktop machine for a friend. I purchased an SSD for him, but when I try to install Windows through USB it says:
We couldn't create a new partition or locate an existing one. For more information, see the Setup log files
I have tried:
- Converting the drive to MBR and GPT
- Diskpart -> clean -> create new primary partition -> mark as active
- Remove all CD, SD, etc. drives from the motherboard (they don't appear in BIOS)
- New SATA cable
- Plug SSD into USB adapter and partition the drive on my desktop and mark it as active
However, none of these worked out for me. Very weird. Therefore I want to install Windows on the SSD through USB through my PC. I have a couple of SATA to USB adapters (with power and everything), so the drive basically appears as an USB drive in Windows. How would I go on about installing my Windows ISO on this drive through USB, without screwing up my partitions on my desktop PC?
What I have:
- Windows ISO
- USB adapter to hook up the SSD to my desktop
Let me know what the best approach would be, to solve this issue would be. Thanks!
windows-10 usb ssd
I am stuck with a weird problem here. I am trying to install Windows 10 on an "old" Windows 7 desktop machine for a friend. I purchased an SSD for him, but when I try to install Windows through USB it says:
We couldn't create a new partition or locate an existing one. For more information, see the Setup log files
I have tried:
- Converting the drive to MBR and GPT
- Diskpart -> clean -> create new primary partition -> mark as active
- Remove all CD, SD, etc. drives from the motherboard (they don't appear in BIOS)
- New SATA cable
- Plug SSD into USB adapter and partition the drive on my desktop and mark it as active
However, none of these worked out for me. Very weird. Therefore I want to install Windows on the SSD through USB through my PC. I have a couple of SATA to USB adapters (with power and everything), so the drive basically appears as an USB drive in Windows. How would I go on about installing my Windows ISO on this drive through USB, without screwing up my partitions on my desktop PC?
What I have:
- Windows ISO
- USB adapter to hook up the SSD to my desktop
Let me know what the best approach would be, to solve this issue would be. Thanks!
windows-10 usb ssd
windows-10 usb ssd
edited Apr 30 '16 at 12:34
MortenMoulder
asked Apr 30 '16 at 12:27
MortenMoulderMortenMoulder
128111
128111
What’s the rationale behind this whole undertaking? Is the laptop not capable of booting from USB, so you could create a thumb drive containing Windows Setup?
– Daniel B
Apr 30 '16 at 12:40
Why don't you just clone the existing install to the SSD, swap drives, deal with re-authenticating at MS, then do a regular upgrade.
– Tetsujin
Apr 30 '16 at 12:41
@DanielB Read the post again. I get the error "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files" and I have tried basically everything to make the new SSD and old HDD work.
– MortenMoulder
Apr 30 '16 at 12:41
@Tetsujin Because the old HDD has been erased. I need to start from scratch.
– MortenMoulder
Apr 30 '16 at 12:42
Then the description 'old Win7 machine' is incorrect - right now it's just 'a machine' ;) If you can force an OS onto a USB drive [difficult as you need an Enterprise license to be able to install WinToGo] then it would very likely fail to boot when you put it back in the first machine, unless you have something like Acronis Universal Restore, which can 'de-specify' a boot drive. How did you generate your 'Windows ISO'? Media Creator?
– Tetsujin
Apr 30 '16 at 12:48
|
show 11 more comments
What’s the rationale behind this whole undertaking? Is the laptop not capable of booting from USB, so you could create a thumb drive containing Windows Setup?
– Daniel B
Apr 30 '16 at 12:40
Why don't you just clone the existing install to the SSD, swap drives, deal with re-authenticating at MS, then do a regular upgrade.
– Tetsujin
Apr 30 '16 at 12:41
@DanielB Read the post again. I get the error "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files" and I have tried basically everything to make the new SSD and old HDD work.
– MortenMoulder
Apr 30 '16 at 12:41
@Tetsujin Because the old HDD has been erased. I need to start from scratch.
– MortenMoulder
Apr 30 '16 at 12:42
Then the description 'old Win7 machine' is incorrect - right now it's just 'a machine' ;) If you can force an OS onto a USB drive [difficult as you need an Enterprise license to be able to install WinToGo] then it would very likely fail to boot when you put it back in the first machine, unless you have something like Acronis Universal Restore, which can 'de-specify' a boot drive. How did you generate your 'Windows ISO'? Media Creator?
– Tetsujin
Apr 30 '16 at 12:48
What’s the rationale behind this whole undertaking? Is the laptop not capable of booting from USB, so you could create a thumb drive containing Windows Setup?
– Daniel B
Apr 30 '16 at 12:40
What’s the rationale behind this whole undertaking? Is the laptop not capable of booting from USB, so you could create a thumb drive containing Windows Setup?
– Daniel B
Apr 30 '16 at 12:40
Why don't you just clone the existing install to the SSD, swap drives, deal with re-authenticating at MS, then do a regular upgrade.
– Tetsujin
Apr 30 '16 at 12:41
Why don't you just clone the existing install to the SSD, swap drives, deal with re-authenticating at MS, then do a regular upgrade.
– Tetsujin
Apr 30 '16 at 12:41
@DanielB Read the post again. I get the error "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files" and I have tried basically everything to make the new SSD and old HDD work.
– MortenMoulder
Apr 30 '16 at 12:41
@DanielB Read the post again. I get the error "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files" and I have tried basically everything to make the new SSD and old HDD work.
– MortenMoulder
Apr 30 '16 at 12:41
@Tetsujin Because the old HDD has been erased. I need to start from scratch.
– MortenMoulder
Apr 30 '16 at 12:42
@Tetsujin Because the old HDD has been erased. I need to start from scratch.
– MortenMoulder
Apr 30 '16 at 12:42
Then the description 'old Win7 machine' is incorrect - right now it's just 'a machine' ;) If you can force an OS onto a USB drive [difficult as you need an Enterprise license to be able to install WinToGo] then it would very likely fail to boot when you put it back in the first machine, unless you have something like Acronis Universal Restore, which can 'de-specify' a boot drive. How did you generate your 'Windows ISO'? Media Creator?
– Tetsujin
Apr 30 '16 at 12:48
Then the description 'old Win7 machine' is incorrect - right now it's just 'a machine' ;) If you can force an OS onto a USB drive [difficult as you need an Enterprise license to be able to install WinToGo] then it would very likely fail to boot when you put it back in the first machine, unless you have something like Acronis Universal Restore, which can 'de-specify' a boot drive. How did you generate your 'Windows ISO'? Media Creator?
– Tetsujin
Apr 30 '16 at 12:48
|
show 11 more comments
1 Answer
1
active
oldest
votes
Worked by using another USB drive. In this case an SD card actually. I had to plug in an USB drive as well (with the same Windows ISO installed), because the installer apparently couldn't find some of the media on the SD card.
TL;DR: Use another USB drive and you won't waste 8+ hours on something stupid.
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1071559%2finstall-windows-10-on-ssd-through-sata-to-usb%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Worked by using another USB drive. In this case an SD card actually. I had to plug in an USB drive as well (with the same Windows ISO installed), because the installer apparently couldn't find some of the media on the SD card.
TL;DR: Use another USB drive and you won't waste 8+ hours on something stupid.
add a comment |
Worked by using another USB drive. In this case an SD card actually. I had to plug in an USB drive as well (with the same Windows ISO installed), because the installer apparently couldn't find some of the media on the SD card.
TL;DR: Use another USB drive and you won't waste 8+ hours on something stupid.
add a comment |
Worked by using another USB drive. In this case an SD card actually. I had to plug in an USB drive as well (with the same Windows ISO installed), because the installer apparently couldn't find some of the media on the SD card.
TL;DR: Use another USB drive and you won't waste 8+ hours on something stupid.
Worked by using another USB drive. In this case an SD card actually. I had to plug in an USB drive as well (with the same Windows ISO installed), because the installer apparently couldn't find some of the media on the SD card.
TL;DR: Use another USB drive and you won't waste 8+ hours on something stupid.
answered Apr 30 '16 at 14:50
MortenMoulderMortenMoulder
128111
128111
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1071559%2finstall-windows-10-on-ssd-through-sata-to-usb%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
What’s the rationale behind this whole undertaking? Is the laptop not capable of booting from USB, so you could create a thumb drive containing Windows Setup?
– Daniel B
Apr 30 '16 at 12:40
Why don't you just clone the existing install to the SSD, swap drives, deal with re-authenticating at MS, then do a regular upgrade.
– Tetsujin
Apr 30 '16 at 12:41
@DanielB Read the post again. I get the error "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files" and I have tried basically everything to make the new SSD and old HDD work.
– MortenMoulder
Apr 30 '16 at 12:41
@Tetsujin Because the old HDD has been erased. I need to start from scratch.
– MortenMoulder
Apr 30 '16 at 12:42
Then the description 'old Win7 machine' is incorrect - right now it's just 'a machine' ;) If you can force an OS onto a USB drive [difficult as you need an Enterprise license to be able to install WinToGo] then it would very likely fail to boot when you put it back in the first machine, unless you have something like Acronis Universal Restore, which can 'de-specify' a boot drive. How did you generate your 'Windows ISO'? Media Creator?
– Tetsujin
Apr 30 '16 at 12:48