USB cannot be detected. Possibly encrypted
I have a old USB drive 2.0. When plugged in, it gives an error " You need to format the disk in the drive" I tried various troubleshooting methods online.
1) Uninstalled and reinstalled the usb drivers manually and also using software then rebooted- still the same error.
2) Updated BIOS settings of my OS - Still the same error.
3) Tried, data recovery tool "Recuva" this does not detect the drive.
I need data from it and this drive possibility might be encrypted.
Please suggest me all the possibilities.
disk-encryption usb-storage data-recovery
asked Dec 5 at 19:01
SECTEST oncu
11
migrated from security.stackexchange.com Dec 5 at 22:43
This question came from our site for information security professionals.
add a comment |
I have a old USB drive 2.0. When plugged in, it gives an error " You need to format the disk in the drive" I tried various troubleshooting methods online.
1) Uninstalled and reinstalled the usb drivers manually and also using software then rebooted- still the same error.
2) Updated BIOS settings of my OS - Still the same error.
3) Tried, data recovery tool "Recuva" this does not detect the drive.
I need data from it and this drive possibility might be encrypted.
Please suggest me all the possibilities.
disk-encryption usb-storage data-recovery
asked Dec 5 at 19:01
SECTEST oncu
11
migrated from security.stackexchange.com Dec 5 at 22:43
This question came from our site for information security professionals.
1
Is this a hard drive or flash drive? Encryption wouldn't affect whether it sees the drive. It sounds more like the drive died.
– fixer1234
Dec 6 at 1:54
what should I do to retrieve data from the drive if the drive is dead ?
– SECTEST oncu
Dec 6 at 17:28
Is this a hard drive or flash drive?
– fixer1234
Dec 6 at 20:07
Its a flash drive
– SECTEST oncu
Dec 6 at 23:21
If you're lucky, this link may help: superuser.com/questions/871850/…. See also: supertechuser.wordpress.com/2016/03/09/…. That's pretty much the state of knowledge, so if those solutions don't work, hopefully you have a backup (which you should always have for a thumb drive because they are unreliable, disposable devices).
– fixer1234
Dec 6 at 23:50
add a comment |
I have a old USB drive 2.0. When plugged in, it gives an error " You need to format the disk in the drive" I tried various troubleshooting methods online.
1) Uninstalled and reinstalled the usb drivers manually and also using software then rebooted- still the same error.
2) Updated BIOS settings of my OS - Still the same error.
3) Tried, data recovery tool "Recuva" this does not detect the drive.
I need data from it and this drive possibility might be encrypted.
Please suggest me all the possibilities.
disk-encryption usb-storage data-recovery
asked Dec 5 at 19:01
SECTEST oncu
11
I have a old USB drive 2.0. When plugged in, it gives an error " You need to format the disk in the drive" I tried various troubleshooting methods online.
1) Uninstalled and reinstalled the usb drivers manually and also using software then rebooted- still the same error.
2) Updated BIOS settings of my OS - Still the same error.
3) Tried, data recovery tool "Recuva" this does not detect the drive.
I need data from it and this drive possibility might be encrypted.
Please suggest me all the possibilities.
disk-encryption usb-storage data-recovery
disk-encryption usb-storage data-recovery
asked Dec 5 at 19:01
SECTEST oncu
11
asked Dec 5 at 19:01
SECTEST oncu
11
asked Dec 5 at 19:01
SECTEST oncu
11
asked Dec 5 at 19:01
SECTEST oncu
11
asked Dec 5 at 19:01
SECTEST oncu
11
11
migrated from security.stackexchange.com Dec 5 at 22:43
This question came from our site for information security professionals.
migrated from security.stackexchange.com Dec 5 at 22:43
This question came from our site for information security professionals.
1
Is this a hard drive or flash drive? Encryption wouldn't affect whether it sees the drive. It sounds more like the drive died.
– fixer1234
Dec 6 at 1:54
what should I do to retrieve data from the drive if the drive is dead ?
– SECTEST oncu
Dec 6 at 17:28
Is this a hard drive or flash drive?
– fixer1234
Dec 6 at 20:07
Its a flash drive
– SECTEST oncu
Dec 6 at 23:21
If you're lucky, this link may help: superuser.com/questions/871850/…. See also: supertechuser.wordpress.com/2016/03/09/…. That's pretty much the state of knowledge, so if those solutions don't work, hopefully you have a backup (which you should always have for a thumb drive because they are unreliable, disposable devices).
– fixer1234
Dec 6 at 23:50
add a comment |
1
Is this a hard drive or flash drive? Encryption wouldn't affect whether it sees the drive. It sounds more like the drive died.
– fixer1234
Dec 6 at 1:54
what should I do to retrieve data from the drive if the drive is dead ?
– SECTEST oncu
Dec 6 at 17:28
Is this a hard drive or flash drive?
– fixer1234
Dec 6 at 20:07
Its a flash drive
– SECTEST oncu
Dec 6 at 23:21
If you're lucky, this link may help: superuser.com/questions/871850/…. See also: supertechuser.wordpress.com/2016/03/09/…. That's pretty much the state of knowledge, so if those solutions don't work, hopefully you have a backup (which you should always have for a thumb drive because they are unreliable, disposable devices).
– fixer1234
Dec 6 at 23:50
1
1
Is this a hard drive or flash drive? Encryption wouldn't affect whether it sees the drive. It sounds more like the drive died.
– fixer1234
Dec 6 at 1:54
Is this a hard drive or flash drive? Encryption wouldn't affect whether it sees the drive. It sounds more like the drive died.
– fixer1234
Dec 6 at 1:54
what should I do to retrieve data from the drive if the drive is dead ?
– SECTEST oncu
Dec 6 at 17:28
what should I do to retrieve data from the drive if the drive is dead ?
– SECTEST oncu
Dec 6 at 17:28
Is this a hard drive or flash drive?
– fixer1234
Dec 6 at 20:07
Is this a hard drive or flash drive?
– fixer1234
Dec 6 at 20:07
Its a flash drive
– SECTEST oncu
Dec 6 at 23:21
Its a flash drive
– SECTEST oncu
Dec 6 at 23:21
If you're lucky, this link may help: superuser.com/questions/871850/…. See also: supertechuser.wordpress.com/2016/03/09/…. That's pretty much the state of knowledge, so if those solutions don't work, hopefully you have a backup (which you should always have for a thumb drive because they are unreliable, disposable devices).
– fixer1234
Dec 6 at 23:50
If you're lucky, this link may help: superuser.com/questions/871850/…. See also: supertechuser.wordpress.com/2016/03/09/…. That's pretty much the state of knowledge, so if those solutions don't work, hopefully you have a backup (which you should always have for a thumb drive because they are unreliable, disposable devices).
– fixer1234
Dec 6 at 23:50
add a comment |
3 Answers
3
active
oldest
votes
Here is the thing, if you don't know whether it is encrypted, I assume you don't know the key it would be encrypted with. If that is the case, the data cannot be recovered without breaking the encryption or brute-forcing the key/password. It is impossibly unlikely you would be able to recover the data in this case.
If it is not encrypted, you could try to make an image of the whole drive and then examine it for example in hex or by a specialized tool, that may be able to distinguish, what filesystem it used and whether it was damaged and move from there. This method may also indicate to you whether the drive is encrypted or irreversibly damaged.
answered Dec 5 at 19:10
Peter Harmann
1313
I tried to clone the drive using DD tool on linux. But, I need the name of the usb which I did not find using commands like lsusb, lsblk etc. But, I can see this USB plugged in diskpart. Can you think of any other way to clone?
– SECTEST oncu
Dec 5 at 19:18
What aboutsudo lshw | less? Alternatively try askubuntu.com/a/289137 (thels /dev/one)
– Peter Harmann
Dec 5 at 19:42
Found it. it says " *-usb:1 Description: Mass storage device, Product, vendor etc." what do you think the name is ?
– SECTEST oncu
Dec 5 at 19:55
@SECTESToncu well the command probably does not give a name, but at least we know the OS detects it and it knows it is a mass storage drive. I would assume the name is going to be something like hdb1 or what, but you can try to confirm by doing the linked process (ls -l /dev/* | wc -lwith and without the USB plugged in and looking for the difference) askubuntu.com/a/289137
– Peter Harmann
Dec 5 at 20:00
1
In Linux, Disks (gnome-disk-utility) orlsblkmight be the easiest to see when a new drive's been added, and what it's device label is (and size, to help verify you're looking at the right one). And look atdmesgand the syslog (/var/log/syslog) after connecting it. If no device shows up in lsblk or/dev/then it's probably just broken.
– Xen2050
Dec 6 at 13:25
|
show 1 more comment
Windows is not as good at this as linux, in my honest experience. I highly suggest you plug the drive into a Linux operating system (ubuntu, for example) and see if it just auto recognizes it. If it doesn't there are a multitude of tools to help you on linux. These for example:
https://www.maketecheasier.com/recover-data-linux-tools/
answered Dec 5 at 20:12
bashCypher
11914
Yep, I also tried in Linux but, the main point it, we need this drive to be identified with a specific name like "sdb" to use data recovery tools. And that is the problem now. I cannot get the name of the USB.
– SECTEST oncu
Dec 5 at 23:21
even in linux it's not recognized? That's a bad sign as tells me that you could have an issue with the partition table scheme? When you plug it into linux it won't recognize it all? gparted or fdisk shows nothing? Can you post a pic?
– bashCypher
Dec 6 at 19:45
gpart does recognize and lsusb as well. But, lsblk doesn't.
– SECTEST oncu
Dec 6 at 23:21
Huh, no block device but gparted see's it? That seems wrong... but all of this seems wrong. I provided multiple recovery tools in that link; I'd try all of them. If they don't work you need to take it to someone to reverse engineer the problem, or cut your losses. Let me know if the forensic tools work.
– bashCypher
Dec 7 at 1:08
add a comment |
Looks like the partition has been changed. Try accessing the disk using diskpart.
Under Diskpart I used "list disk" command and it only shows my harddrive. But, I can see USB device under Control pannel --> Devices and printers section. And under Device Management --> Universal Serial Bus Controllers --> USB Mass Storage Device shows Yellow triangle mark(Warning) on it.
– SECTEST oncu
Dec 5 at 19:31
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1381165%2fusb-cannot-be-detected-possibly-encrypted%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
Here is the thing, if you don't know whether it is encrypted, I assume you don't know the key it would be encrypted with. If that is the case, the data cannot be recovered without breaking the encryption or brute-forcing the key/password. It is impossibly unlikely you would be able to recover the data in this case.
If it is not encrypted, you could try to make an image of the whole drive and then examine it for example in hex or by a specialized tool, that may be able to distinguish, what filesystem it used and whether it was damaged and move from there. This method may also indicate to you whether the drive is encrypted or irreversibly damaged.
answered Dec 5 at 19:10
Peter Harmann
1313
I tried to clone the drive using DD tool on linux. But, I need the name of the usb which I did not find using commands like lsusb, lsblk etc. But, I can see this USB plugged in diskpart. Can you think of any other way to clone?
– SECTEST oncu
Dec 5 at 19:18
What aboutsudo lshw | less? Alternatively try askubuntu.com/a/289137 (thels /dev/one)
– Peter Harmann
Dec 5 at 19:42
Found it. it says " *-usb:1 Description: Mass storage device, Product, vendor etc." what do you think the name is ?
– SECTEST oncu
Dec 5 at 19:55
@SECTESToncu well the command probably does not give a name, but at least we know the OS detects it and it knows it is a mass storage drive. I would assume the name is going to be something like hdb1 or what, but you can try to confirm by doing the linked process (ls -l /dev/* | wc -lwith and without the USB plugged in and looking for the difference) askubuntu.com/a/289137
– Peter Harmann
Dec 5 at 20:00
1
In Linux, Disks (gnome-disk-utility) orlsblkmight be the easiest to see when a new drive's been added, and what it's device label is (and size, to help verify you're looking at the right one). And look atdmesgand the syslog (/var/log/syslog) after connecting it. If no device shows up in lsblk or/dev/then it's probably just broken.
– Xen2050
Dec 6 at 13:25
|
show 1 more comment
Here is the thing, if you don't know whether it is encrypted, I assume you don't know the key it would be encrypted with. If that is the case, the data cannot be recovered without breaking the encryption or brute-forcing the key/password. It is impossibly unlikely you would be able to recover the data in this case.
If it is not encrypted, you could try to make an image of the whole drive and then examine it for example in hex or by a specialized tool, that may be able to distinguish, what filesystem it used and whether it was damaged and move from there. This method may also indicate to you whether the drive is encrypted or irreversibly damaged.
answered Dec 5 at 19:10
Peter Harmann
1313
I tried to clone the drive using DD tool on linux. But, I need the name of the usb which I did not find using commands like lsusb, lsblk etc. But, I can see this USB plugged in diskpart. Can you think of any other way to clone?
– SECTEST oncu
Dec 5 at 19:18
What aboutsudo lshw | less? Alternatively try askubuntu.com/a/289137 (thels /dev/one)
– Peter Harmann
Dec 5 at 19:42
Found it. it says " *-usb:1 Description: Mass storage device, Product, vendor etc." what do you think the name is ?
– SECTEST oncu
Dec 5 at 19:55
@SECTESToncu well the command probably does not give a name, but at least we know the OS detects it and it knows it is a mass storage drive. I would assume the name is going to be something like hdb1 or what, but you can try to confirm by doing the linked process (ls -l /dev/* | wc -lwith and without the USB plugged in and looking for the difference) askubuntu.com/a/289137
– Peter Harmann
Dec 5 at 20:00
1
In Linux, Disks (gnome-disk-utility) orlsblkmight be the easiest to see when a new drive's been added, and what it's device label is (and size, to help verify you're looking at the right one). And look atdmesgand the syslog (/var/log/syslog) after connecting it. If no device shows up in lsblk or/dev/then it's probably just broken.
– Xen2050
Dec 6 at 13:25
|
show 1 more comment
Here is the thing, if you don't know whether it is encrypted, I assume you don't know the key it would be encrypted with. If that is the case, the data cannot be recovered without breaking the encryption or brute-forcing the key/password. It is impossibly unlikely you would be able to recover the data in this case.
If it is not encrypted, you could try to make an image of the whole drive and then examine it for example in hex or by a specialized tool, that may be able to distinguish, what filesystem it used and whether it was damaged and move from there. This method may also indicate to you whether the drive is encrypted or irreversibly damaged.
answered Dec 5 at 19:10
Peter Harmann
1313
Here is the thing, if you don't know whether it is encrypted, I assume you don't know the key it would be encrypted with. If that is the case, the data cannot be recovered without breaking the encryption or brute-forcing the key/password. It is impossibly unlikely you would be able to recover the data in this case.
If it is not encrypted, you could try to make an image of the whole drive and then examine it for example in hex or by a specialized tool, that may be able to distinguish, what filesystem it used and whether it was damaged and move from there. This method may also indicate to you whether the drive is encrypted or irreversibly damaged.
answered Dec 5 at 19:10
Peter Harmann
1313
answered Dec 5 at 19:10
Peter Harmann
1313
answered Dec 5 at 19:10
Peter Harmann
1313
answered Dec 5 at 19:10
Peter Harmann
1313
1313
I tried to clone the drive using DD tool on linux. But, I need the name of the usb which I did not find using commands like lsusb, lsblk etc. But, I can see this USB plugged in diskpart. Can you think of any other way to clone?
– SECTEST oncu
Dec 5 at 19:18
What aboutsudo lshw | less? Alternatively try askubuntu.com/a/289137 (thels /dev/one)
– Peter Harmann
Dec 5 at 19:42
Found it. it says " *-usb:1 Description: Mass storage device, Product, vendor etc." what do you think the name is ?
– SECTEST oncu
Dec 5 at 19:55
@SECTESToncu well the command probably does not give a name, but at least we know the OS detects it and it knows it is a mass storage drive. I would assume the name is going to be something like hdb1 or what, but you can try to confirm by doing the linked process (ls -l /dev/* | wc -lwith and without the USB plugged in and looking for the difference) askubuntu.com/a/289137
– Peter Harmann
Dec 5 at 20:00
1
In Linux, Disks (gnome-disk-utility) orlsblkmight be the easiest to see when a new drive's been added, and what it's device label is (and size, to help verify you're looking at the right one). And look atdmesgand the syslog (/var/log/syslog) after connecting it. If no device shows up in lsblk or/dev/then it's probably just broken.
– Xen2050
Dec 6 at 13:25
|
show 1 more comment
I tried to clone the drive using DD tool on linux. But, I need the name of the usb which I did not find using commands like lsusb, lsblk etc. But, I can see this USB plugged in diskpart. Can you think of any other way to clone?
– SECTEST oncu
Dec 5 at 19:18
What aboutsudo lshw | less? Alternatively try askubuntu.com/a/289137 (thels /dev/one)
– Peter Harmann
Dec 5 at 19:42
Found it. it says " *-usb:1 Description: Mass storage device, Product, vendor etc." what do you think the name is ?
– SECTEST oncu
Dec 5 at 19:55
@SECTESToncu well the command probably does not give a name, but at least we know the OS detects it and it knows it is a mass storage drive. I would assume the name is going to be something like hdb1 or what, but you can try to confirm by doing the linked process (ls -l /dev/* | wc -lwith and without the USB plugged in and looking for the difference) askubuntu.com/a/289137
– Peter Harmann
Dec 5 at 20:00
1
In Linux, Disks (gnome-disk-utility) orlsblkmight be the easiest to see when a new drive's been added, and what it's device label is (and size, to help verify you're looking at the right one). And look atdmesgand the syslog (/var/log/syslog) after connecting it. If no device shows up in lsblk or/dev/then it's probably just broken.
– Xen2050
Dec 6 at 13:25
I tried to clone the drive using DD tool on linux. But, I need the name of the usb which I did not find using commands like lsusb, lsblk etc. But, I can see this USB plugged in diskpart. Can you think of any other way to clone?
– SECTEST oncu
Dec 5 at 19:18
I tried to clone the drive using DD tool on linux. But, I need the name of the usb which I did not find using commands like lsusb, lsblk etc. But, I can see this USB plugged in diskpart. Can you think of any other way to clone?
– SECTEST oncu
Dec 5 at 19:18
What about
sudo lshw | less? Alternatively try askubuntu.com/a/289137 (the ls /dev/ one)– Peter Harmann
Dec 5 at 19:42
What about
sudo lshw | less? Alternatively try askubuntu.com/a/289137 (the ls /dev/ one)– Peter Harmann
Dec 5 at 19:42
Found it. it says " *-usb:1 Description: Mass storage device, Product, vendor etc." what do you think the name is ?
– SECTEST oncu
Dec 5 at 19:55
Found it. it says " *-usb:1 Description: Mass storage device, Product, vendor etc." what do you think the name is ?
– SECTEST oncu
Dec 5 at 19:55
@SECTESToncu well the command probably does not give a name, but at least we know the OS detects it and it knows it is a mass storage drive. I would assume the name is going to be something like hdb1 or what, but you can try to confirm by doing the linked process (
ls -l /dev/* | wc -l with and without the USB plugged in and looking for the difference) askubuntu.com/a/289137– Peter Harmann
Dec 5 at 20:00
@SECTESToncu well the command probably does not give a name, but at least we know the OS detects it and it knows it is a mass storage drive. I would assume the name is going to be something like hdb1 or what, but you can try to confirm by doing the linked process (
ls -l /dev/* | wc -l with and without the USB plugged in and looking for the difference) askubuntu.com/a/289137– Peter Harmann
Dec 5 at 20:00
1
1
In Linux, Disks (
gnome-disk-utility) or lsblk might be the easiest to see when a new drive's been added, and what it's device label is (and size, to help verify you're looking at the right one). And look at dmesg and the syslog (/var/log/syslog) after connecting it. If no device shows up in lsblk or /dev/ then it's probably just broken.– Xen2050
Dec 6 at 13:25
In Linux, Disks (
gnome-disk-utility) or lsblk might be the easiest to see when a new drive's been added, and what it's device label is (and size, to help verify you're looking at the right one). And look at dmesg and the syslog (/var/log/syslog) after connecting it. If no device shows up in lsblk or /dev/ then it's probably just broken.– Xen2050
Dec 6 at 13:25
|
show 1 more comment
Windows is not as good at this as linux, in my honest experience. I highly suggest you plug the drive into a Linux operating system (ubuntu, for example) and see if it just auto recognizes it. If it doesn't there are a multitude of tools to help you on linux. These for example:
https://www.maketecheasier.com/recover-data-linux-tools/
answered Dec 5 at 20:12
bashCypher
11914
Yep, I also tried in Linux but, the main point it, we need this drive to be identified with a specific name like "sdb" to use data recovery tools. And that is the problem now. I cannot get the name of the USB.
– SECTEST oncu
Dec 5 at 23:21
even in linux it's not recognized? That's a bad sign as tells me that you could have an issue with the partition table scheme? When you plug it into linux it won't recognize it all? gparted or fdisk shows nothing? Can you post a pic?
– bashCypher
Dec 6 at 19:45
gpart does recognize and lsusb as well. But, lsblk doesn't.
– SECTEST oncu
Dec 6 at 23:21
Huh, no block device but gparted see's it? That seems wrong... but all of this seems wrong. I provided multiple recovery tools in that link; I'd try all of them. If they don't work you need to take it to someone to reverse engineer the problem, or cut your losses. Let me know if the forensic tools work.
– bashCypher
Dec 7 at 1:08
add a comment |
Windows is not as good at this as linux, in my honest experience. I highly suggest you plug the drive into a Linux operating system (ubuntu, for example) and see if it just auto recognizes it. If it doesn't there are a multitude of tools to help you on linux. These for example:
https://www.maketecheasier.com/recover-data-linux-tools/
answered Dec 5 at 20:12
bashCypher
11914
Yep, I also tried in Linux but, the main point it, we need this drive to be identified with a specific name like "sdb" to use data recovery tools. And that is the problem now. I cannot get the name of the USB.
– SECTEST oncu
Dec 5 at 23:21
even in linux it's not recognized? That's a bad sign as tells me that you could have an issue with the partition table scheme? When you plug it into linux it won't recognize it all? gparted or fdisk shows nothing? Can you post a pic?
– bashCypher
Dec 6 at 19:45
gpart does recognize and lsusb as well. But, lsblk doesn't.
– SECTEST oncu
Dec 6 at 23:21
Huh, no block device but gparted see's it? That seems wrong... but all of this seems wrong. I provided multiple recovery tools in that link; I'd try all of them. If they don't work you need to take it to someone to reverse engineer the problem, or cut your losses. Let me know if the forensic tools work.
– bashCypher
Dec 7 at 1:08
add a comment |
Windows is not as good at this as linux, in my honest experience. I highly suggest you plug the drive into a Linux operating system (ubuntu, for example) and see if it just auto recognizes it. If it doesn't there are a multitude of tools to help you on linux. These for example:
https://www.maketecheasier.com/recover-data-linux-tools/
answered Dec 5 at 20:12
bashCypher
11914
Windows is not as good at this as linux, in my honest experience. I highly suggest you plug the drive into a Linux operating system (ubuntu, for example) and see if it just auto recognizes it. If it doesn't there are a multitude of tools to help you on linux. These for example:
https://www.maketecheasier.com/recover-data-linux-tools/
answered Dec 5 at 20:12
bashCypher
11914
answered Dec 5 at 20:12
bashCypher
11914
answered Dec 5 at 20:12
bashCypher
11914
answered Dec 5 at 20:12
bashCypher
11914
11914
Yep, I also tried in Linux but, the main point it, we need this drive to be identified with a specific name like "sdb" to use data recovery tools. And that is the problem now. I cannot get the name of the USB.
– SECTEST oncu
Dec 5 at 23:21
even in linux it's not recognized? That's a bad sign as tells me that you could have an issue with the partition table scheme? When you plug it into linux it won't recognize it all? gparted or fdisk shows nothing? Can you post a pic?
– bashCypher
Dec 6 at 19:45
gpart does recognize and lsusb as well. But, lsblk doesn't.
– SECTEST oncu
Dec 6 at 23:21
Huh, no block device but gparted see's it? That seems wrong... but all of this seems wrong. I provided multiple recovery tools in that link; I'd try all of them. If they don't work you need to take it to someone to reverse engineer the problem, or cut your losses. Let me know if the forensic tools work.
– bashCypher
Dec 7 at 1:08
add a comment |
Yep, I also tried in Linux but, the main point it, we need this drive to be identified with a specific name like "sdb" to use data recovery tools. And that is the problem now. I cannot get the name of the USB.
– SECTEST oncu
Dec 5 at 23:21
even in linux it's not recognized? That's a bad sign as tells me that you could have an issue with the partition table scheme? When you plug it into linux it won't recognize it all? gparted or fdisk shows nothing? Can you post a pic?
– bashCypher
Dec 6 at 19:45
gpart does recognize and lsusb as well. But, lsblk doesn't.
– SECTEST oncu
Dec 6 at 23:21
Huh, no block device but gparted see's it? That seems wrong... but all of this seems wrong. I provided multiple recovery tools in that link; I'd try all of them. If they don't work you need to take it to someone to reverse engineer the problem, or cut your losses. Let me know if the forensic tools work.
– bashCypher
Dec 7 at 1:08
Yep, I also tried in Linux but, the main point it, we need this drive to be identified with a specific name like "sdb" to use data recovery tools. And that is the problem now. I cannot get the name of the USB.
– SECTEST oncu
Dec 5 at 23:21
Yep, I also tried in Linux but, the main point it, we need this drive to be identified with a specific name like "sdb" to use data recovery tools. And that is the problem now. I cannot get the name of the USB.
– SECTEST oncu
Dec 5 at 23:21
even in linux it's not recognized? That's a bad sign as tells me that you could have an issue with the partition table scheme? When you plug it into linux it won't recognize it all? gparted or fdisk shows nothing? Can you post a pic?
– bashCypher
Dec 6 at 19:45
even in linux it's not recognized? That's a bad sign as tells me that you could have an issue with the partition table scheme? When you plug it into linux it won't recognize it all? gparted or fdisk shows nothing? Can you post a pic?
– bashCypher
Dec 6 at 19:45
gpart does recognize and lsusb as well. But, lsblk doesn't.
– SECTEST oncu
Dec 6 at 23:21
gpart does recognize and lsusb as well. But, lsblk doesn't.
– SECTEST oncu
Dec 6 at 23:21
Huh, no block device but gparted see's it? That seems wrong... but all of this seems wrong. I provided multiple recovery tools in that link; I'd try all of them. If they don't work you need to take it to someone to reverse engineer the problem, or cut your losses. Let me know if the forensic tools work.
– bashCypher
Dec 7 at 1:08
Huh, no block device but gparted see's it? That seems wrong... but all of this seems wrong. I provided multiple recovery tools in that link; I'd try all of them. If they don't work you need to take it to someone to reverse engineer the problem, or cut your losses. Let me know if the forensic tools work.
– bashCypher
Dec 7 at 1:08
add a comment |
Looks like the partition has been changed. Try accessing the disk using diskpart.
Under Diskpart I used "list disk" command and it only shows my harddrive. But, I can see USB device under Control pannel --> Devices and printers section. And under Device Management --> Universal Serial Bus Controllers --> USB Mass Storage Device shows Yellow triangle mark(Warning) on it.
– SECTEST oncu
Dec 5 at 19:31
add a comment |
Looks like the partition has been changed. Try accessing the disk using diskpart.
Under Diskpart I used "list disk" command and it only shows my harddrive. But, I can see USB device under Control pannel --> Devices and printers section. And under Device Management --> Universal Serial Bus Controllers --> USB Mass Storage Device shows Yellow triangle mark(Warning) on it.
– SECTEST oncu
Dec 5 at 19:31
add a comment |
Looks like the partition has been changed. Try accessing the disk using diskpart.
Looks like the partition has been changed. Try accessing the disk using diskpart.
answered Dec 5 at 19:21
Kavish Baghel
Under Diskpart I used "list disk" command and it only shows my harddrive. But, I can see USB device under Control pannel --> Devices and printers section. And under Device Management --> Universal Serial Bus Controllers --> USB Mass Storage Device shows Yellow triangle mark(Warning) on it.
– SECTEST oncu
Dec 5 at 19:31
add a comment |
Under Diskpart I used "list disk" command and it only shows my harddrive. But, I can see USB device under Control pannel --> Devices and printers section. And under Device Management --> Universal Serial Bus Controllers --> USB Mass Storage Device shows Yellow triangle mark(Warning) on it.
– SECTEST oncu
Dec 5 at 19:31
Under Diskpart I used "list disk" command and it only shows my harddrive. But, I can see USB device under Control pannel --> Devices and printers section. And under Device Management --> Universal Serial Bus Controllers --> USB Mass Storage Device shows Yellow triangle mark(Warning) on it.
– SECTEST oncu
Dec 5 at 19:31
Under Diskpart I used "list disk" command and it only shows my harddrive. But, I can see USB device under Control pannel --> Devices and printers section. And under Device Management --> Universal Serial Bus Controllers --> USB Mass Storage Device shows Yellow triangle mark(Warning) on it.
– SECTEST oncu
Dec 5 at 19:31
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1381165%2fusb-cannot-be-detected-possibly-encrypted%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
Is this a hard drive or flash drive? Encryption wouldn't affect whether it sees the drive. It sounds more like the drive died.
– fixer1234
Dec 6 at 1:54
what should I do to retrieve data from the drive if the drive is dead ?
– SECTEST oncu
Dec 6 at 17:28
Is this a hard drive or flash drive?
– fixer1234
Dec 6 at 20:07
Its a flash drive
– SECTEST oncu
Dec 6 at 23:21
If you're lucky, this link may help: superuser.com/questions/871850/…. See also: supertechuser.wordpress.com/2016/03/09/…. That's pretty much the state of knowledge, so if those solutions don't work, hopefully you have a backup (which you should always have for a thumb drive because they are unreliable, disposable devices).
– fixer1234
Dec 6 at 23:50