How to open telnet port in wireless D-Link router?
I want to access D-Link DIR-600L wireless router via terminal. Can i do this by opening telnet port. How to open telnet port in wireless routers?
router telnet
edited Jul 26 '16 at 19:06
Hennes
58.8k792141
asked Jul 1 '15 at 9:42
Mmh
111
add a comment |
I want to access D-Link DIR-600L wireless router via terminal. Can i do this by opening telnet port. How to open telnet port in wireless routers?
router telnet
edited Jul 26 '16 at 19:06
Hennes
58.8k792141
asked Jul 1 '15 at 9:42
Mmh
111
If the router really supports telnet (or some other remote terminal access), you should be able to find the answer to your question on the user's manual.
– Larssend
Jul 1 '15 at 9:55
1
Apparently you can with some kind of hack whether it's advisable or not I don't know spect.cl/blog/2011/12/d-link-dir-600-command-injection
– barlop
Jul 1 '15 at 9:58
As mentioned by quannt you should be able to enable this via the web interface but you should avoid Telnet as it is not secure. SSH is a much better option.
– mk444
Jan 11 '16 at 4:39
add a comment |
I want to access D-Link DIR-600L wireless router via terminal. Can i do this by opening telnet port. How to open telnet port in wireless routers?
router telnet
edited Jul 26 '16 at 19:06
Hennes
58.8k792141
asked Jul 1 '15 at 9:42
Mmh
111
I want to access D-Link DIR-600L wireless router via terminal. Can i do this by opening telnet port. How to open telnet port in wireless routers?
router telnet
router telnet
edited Jul 26 '16 at 19:06
Hennes
58.8k792141
asked Jul 1 '15 at 9:42
Mmh
111
edited Jul 26 '16 at 19:06
Hennes
58.8k792141
asked Jul 1 '15 at 9:42
Mmh
111
edited Jul 26 '16 at 19:06
Hennes
58.8k792141
edited Jul 26 '16 at 19:06
Hennes
58.8k792141
edited Jul 26 '16 at 19:06
Hennes
58.8k792141
58.8k792141
asked Jul 1 '15 at 9:42
Mmh
111
asked Jul 1 '15 at 9:42
Mmh
111
asked Jul 1 '15 at 9:42
Mmh
111
111
If the router really supports telnet (or some other remote terminal access), you should be able to find the answer to your question on the user's manual.
– Larssend
Jul 1 '15 at 9:55
1
Apparently you can with some kind of hack whether it's advisable or not I don't know spect.cl/blog/2011/12/d-link-dir-600-command-injection
– barlop
Jul 1 '15 at 9:58
As mentioned by quannt you should be able to enable this via the web interface but you should avoid Telnet as it is not secure. SSH is a much better option.
– mk444
Jan 11 '16 at 4:39
add a comment |
If the router really supports telnet (or some other remote terminal access), you should be able to find the answer to your question on the user's manual.
– Larssend
Jul 1 '15 at 9:55
1
Apparently you can with some kind of hack whether it's advisable or not I don't know spect.cl/blog/2011/12/d-link-dir-600-command-injection
– barlop
Jul 1 '15 at 9:58
As mentioned by quannt you should be able to enable this via the web interface but you should avoid Telnet as it is not secure. SSH is a much better option.
– mk444
Jan 11 '16 at 4:39
If the router really supports telnet (or some other remote terminal access), you should be able to find the answer to your question on the user's manual.
– Larssend
Jul 1 '15 at 9:55
If the router really supports telnet (or some other remote terminal access), you should be able to find the answer to your question on the user's manual.
– Larssend
Jul 1 '15 at 9:55
1
1
Apparently you can with some kind of hack whether it's advisable or not I don't know spect.cl/blog/2011/12/d-link-dir-600-command-injection
– barlop
Jul 1 '15 at 9:58
Apparently you can with some kind of hack whether it's advisable or not I don't know spect.cl/blog/2011/12/d-link-dir-600-command-injection
– barlop
Jul 1 '15 at 9:58
As mentioned by quannt you should be able to enable this via the web interface but you should avoid Telnet as it is not secure. SSH is a much better option.
– mk444
Jan 11 '16 at 4:39
As mentioned by quannt you should be able to enable this via the web interface but you should avoid Telnet as it is not secure. SSH is a much better option.
– mk444
Jan 11 '16 at 4:39
add a comment |
2 Answers
2
active
oldest
votes
- Login to the web interface.
- You can access shell terminal using:
192.168.0.1/shell.aspwhere192.168.0.1is your IP address of Wi-Fi router. - In the shell terminal you type:
telnetd.shand pressApply. - Using telnet client in your PC and type
telnet 192.168.0.1and you can see login prompt.
But I can’t find any information to login by root. Router say login incorrect when I type root in login prompt.
edited Jan 11 '16 at 4:13
JakeGould
31k1093137
answered Jan 11 '16 at 2:41
quannt
11
This is decent info, but the last part of your answer reads like a new question. It might be best if you post a new question referencing this question that asks what login credentials you should be using.
– JakeGould
Jan 11 '16 at 4:14
thank, but i think if someone know answer when search this question, i can get the solution in fastest way.
– quannt
Jan 25 '16 at 2:36
Tryadmin, else, since it's likely the information would be covered somewhere by an OpenWrt or DD-WRT user, I'd recommend doing some research on OpenWrt and DD-WRT's sites, wikis, or forums if either supports the device, as well as through google.
– JW0914
Aug 6 '18 at 4:27
add a comment |
First of all, don't use telnet - just don't if you can avoid it. Buy a copy of Michael W. Lucas "SSH Mastery 2nd Edition" (which is actually quite approachable) and read it. Telnet is not encrypted (and also has way less functionality than OpenSSH)!
If you want to use telnet anyway:
- Login to the web interface with Your credentials.
- If you use Windows, open cmd.exe from start. (Windows+R type
cmdand press Enter) - Write
telnet <YOUR ROUTERS IP HERE>e.g. liketelnet 192.168.0.100
- Login as
adminand write Your password.
Your D-Link DIR-600L Router has most likely many security vulnerabilities. Please do the internet community a favor and upgrade to a supported operating system like OpenWRT (which would give you complete SSH also) or by buying a supported router from a reputable manufacturer and keeping it up to date.
I have myself used OpenWRT on a similar device by D-Link. Installing it will probably also be easier than you expect and you will have SSH access and full control also. In OpenWRT, there are serious advances in how your internet connection gets used more efficiently and also regular security fixes (which you should apply). You might also learn something helpful on the way, like not using telnet in 2018.
Btw. you will do yourself a favor, if you upgrade to something newer with Gigabit Ethernet Ports, and more RAM (like at least 128 MB). You can have a look, whether OpenWRT folks recommend it beforehand, since those are actually the serious users. The Linksys WRT AC1200 seems to be well supported.
answered Aug 5 '18 at 22:21
AdamKalisz
40946
While you make several good points, your answer has very little to do with what was asked. Telnet is a feature that needs to die due to it's serious security risks and implications, however @Mmh asked how to enable it, which you didn't even attempt to address. Might I suggest editing your answer to address that, as well as removing the 1st & 3rd paragraphs? Without an edit, you're likely going to see more down votes. If you edit your answer, I'll remove my down vote.
– JW0914
Aug 6 '18 at 3:54
Thank You for Your time and thought. Please read the question again "I want to access D-Link DIR-600L wireless router via terminal. Can i do this by opening telnet port. [Grammatically, here should be a question mark.]" -> My answer to what the user wants to do is don't, you will hurt yourself and possibly others. Then I offer an overall better solution - SSH and possibly OpenWRT, which also puts you in control of your device. This is what I think the user actually wants.
– AdamKalisz
Aug 6 '18 at 17:18
1
Thank you for considering re-wording your answer, my down vote has been removed.
– JW0914
Aug 7 '18 at 13:45
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f934944%2fhow-to-open-telnet-port-in-wireless-d-link-router%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
- Login to the web interface.
- You can access shell terminal using:
192.168.0.1/shell.aspwhere192.168.0.1is your IP address of Wi-Fi router. - In the shell terminal you type:
telnetd.shand pressApply. - Using telnet client in your PC and type
telnet 192.168.0.1and you can see login prompt.
But I can’t find any information to login by root. Router say login incorrect when I type root in login prompt.
edited Jan 11 '16 at 4:13
JakeGould
31k1093137
answered Jan 11 '16 at 2:41
quannt
11
This is decent info, but the last part of your answer reads like a new question. It might be best if you post a new question referencing this question that asks what login credentials you should be using.
– JakeGould
Jan 11 '16 at 4:14
thank, but i think if someone know answer when search this question, i can get the solution in fastest way.
– quannt
Jan 25 '16 at 2:36
Tryadmin, else, since it's likely the information would be covered somewhere by an OpenWrt or DD-WRT user, I'd recommend doing some research on OpenWrt and DD-WRT's sites, wikis, or forums if either supports the device, as well as through google.
– JW0914
Aug 6 '18 at 4:27
add a comment |
- Login to the web interface.
- You can access shell terminal using:
192.168.0.1/shell.aspwhere192.168.0.1is your IP address of Wi-Fi router. - In the shell terminal you type:
telnetd.shand pressApply. - Using telnet client in your PC and type
telnet 192.168.0.1and you can see login prompt.
But I can’t find any information to login by root. Router say login incorrect when I type root in login prompt.
edited Jan 11 '16 at 4:13
JakeGould
31k1093137
answered Jan 11 '16 at 2:41
quannt
11
This is decent info, but the last part of your answer reads like a new question. It might be best if you post a new question referencing this question that asks what login credentials you should be using.
– JakeGould
Jan 11 '16 at 4:14
thank, but i think if someone know answer when search this question, i can get the solution in fastest way.
– quannt
Jan 25 '16 at 2:36
Tryadmin, else, since it's likely the information would be covered somewhere by an OpenWrt or DD-WRT user, I'd recommend doing some research on OpenWrt and DD-WRT's sites, wikis, or forums if either supports the device, as well as through google.
– JW0914
Aug 6 '18 at 4:27
add a comment |
- Login to the web interface.
- You can access shell terminal using:
192.168.0.1/shell.aspwhere192.168.0.1is your IP address of Wi-Fi router. - In the shell terminal you type:
telnetd.shand pressApply. - Using telnet client in your PC and type
telnet 192.168.0.1and you can see login prompt.
But I can’t find any information to login by root. Router say login incorrect when I type root in login prompt.
edited Jan 11 '16 at 4:13
JakeGould
31k1093137
answered Jan 11 '16 at 2:41
quannt
11
- Login to the web interface.
- You can access shell terminal using:
192.168.0.1/shell.aspwhere192.168.0.1is your IP address of Wi-Fi router. - In the shell terminal you type:
telnetd.shand pressApply. - Using telnet client in your PC and type
telnet 192.168.0.1and you can see login prompt.
But I can’t find any information to login by root. Router say login incorrect when I type root in login prompt.
edited Jan 11 '16 at 4:13
JakeGould
31k1093137
answered Jan 11 '16 at 2:41
quannt
11
edited Jan 11 '16 at 4:13
JakeGould
31k1093137
edited Jan 11 '16 at 4:13
JakeGould
31k1093137
edited Jan 11 '16 at 4:13
JakeGould
31k1093137
31k1093137
answered Jan 11 '16 at 2:41
quannt
11
answered Jan 11 '16 at 2:41
quannt
11
answered Jan 11 '16 at 2:41
quannt
11
11
This is decent info, but the last part of your answer reads like a new question. It might be best if you post a new question referencing this question that asks what login credentials you should be using.
– JakeGould
Jan 11 '16 at 4:14
thank, but i think if someone know answer when search this question, i can get the solution in fastest way.
– quannt
Jan 25 '16 at 2:36
Tryadmin, else, since it's likely the information would be covered somewhere by an OpenWrt or DD-WRT user, I'd recommend doing some research on OpenWrt and DD-WRT's sites, wikis, or forums if either supports the device, as well as through google.
– JW0914
Aug 6 '18 at 4:27
add a comment |
This is decent info, but the last part of your answer reads like a new question. It might be best if you post a new question referencing this question that asks what login credentials you should be using.
– JakeGould
Jan 11 '16 at 4:14
thank, but i think if someone know answer when search this question, i can get the solution in fastest way.
– quannt
Jan 25 '16 at 2:36
Tryadmin, else, since it's likely the information would be covered somewhere by an OpenWrt or DD-WRT user, I'd recommend doing some research on OpenWrt and DD-WRT's sites, wikis, or forums if either supports the device, as well as through google.
– JW0914
Aug 6 '18 at 4:27
This is decent info, but the last part of your answer reads like a new question. It might be best if you post a new question referencing this question that asks what login credentials you should be using.
– JakeGould
Jan 11 '16 at 4:14
This is decent info, but the last part of your answer reads like a new question. It might be best if you post a new question referencing this question that asks what login credentials you should be using.
– JakeGould
Jan 11 '16 at 4:14
thank, but i think if someone know answer when search this question, i can get the solution in fastest way.
– quannt
Jan 25 '16 at 2:36
thank, but i think if someone know answer when search this question, i can get the solution in fastest way.
– quannt
Jan 25 '16 at 2:36
Try
admin, else, since it's likely the information would be covered somewhere by an OpenWrt or DD-WRT user, I'd recommend doing some research on OpenWrt and DD-WRT's sites, wikis, or forums if either supports the device, as well as through google.– JW0914
Aug 6 '18 at 4:27
Try
admin, else, since it's likely the information would be covered somewhere by an OpenWrt or DD-WRT user, I'd recommend doing some research on OpenWrt and DD-WRT's sites, wikis, or forums if either supports the device, as well as through google.– JW0914
Aug 6 '18 at 4:27
add a comment |
First of all, don't use telnet - just don't if you can avoid it. Buy a copy of Michael W. Lucas "SSH Mastery 2nd Edition" (which is actually quite approachable) and read it. Telnet is not encrypted (and also has way less functionality than OpenSSH)!
If you want to use telnet anyway:
- Login to the web interface with Your credentials.
- If you use Windows, open cmd.exe from start. (Windows+R type
cmdand press Enter) - Write
telnet <YOUR ROUTERS IP HERE>e.g. liketelnet 192.168.0.100
- Login as
adminand write Your password.
Your D-Link DIR-600L Router has most likely many security vulnerabilities. Please do the internet community a favor and upgrade to a supported operating system like OpenWRT (which would give you complete SSH also) or by buying a supported router from a reputable manufacturer and keeping it up to date.
I have myself used OpenWRT on a similar device by D-Link. Installing it will probably also be easier than you expect and you will have SSH access and full control also. In OpenWRT, there are serious advances in how your internet connection gets used more efficiently and also regular security fixes (which you should apply). You might also learn something helpful on the way, like not using telnet in 2018.
Btw. you will do yourself a favor, if you upgrade to something newer with Gigabit Ethernet Ports, and more RAM (like at least 128 MB). You can have a look, whether OpenWRT folks recommend it beforehand, since those are actually the serious users. The Linksys WRT AC1200 seems to be well supported.
answered Aug 5 '18 at 22:21
AdamKalisz
40946
While you make several good points, your answer has very little to do with what was asked. Telnet is a feature that needs to die due to it's serious security risks and implications, however @Mmh asked how to enable it, which you didn't even attempt to address. Might I suggest editing your answer to address that, as well as removing the 1st & 3rd paragraphs? Without an edit, you're likely going to see more down votes. If you edit your answer, I'll remove my down vote.
– JW0914
Aug 6 '18 at 3:54
Thank You for Your time and thought. Please read the question again "I want to access D-Link DIR-600L wireless router via terminal. Can i do this by opening telnet port. [Grammatically, here should be a question mark.]" -> My answer to what the user wants to do is don't, you will hurt yourself and possibly others. Then I offer an overall better solution - SSH and possibly OpenWRT, which also puts you in control of your device. This is what I think the user actually wants.
– AdamKalisz
Aug 6 '18 at 17:18
1
Thank you for considering re-wording your answer, my down vote has been removed.
– JW0914
Aug 7 '18 at 13:45
add a comment |
First of all, don't use telnet - just don't if you can avoid it. Buy a copy of Michael W. Lucas "SSH Mastery 2nd Edition" (which is actually quite approachable) and read it. Telnet is not encrypted (and also has way less functionality than OpenSSH)!
If you want to use telnet anyway:
- Login to the web interface with Your credentials.
- If you use Windows, open cmd.exe from start. (Windows+R type
cmdand press Enter) - Write
telnet <YOUR ROUTERS IP HERE>e.g. liketelnet 192.168.0.100
- Login as
adminand write Your password.
Your D-Link DIR-600L Router has most likely many security vulnerabilities. Please do the internet community a favor and upgrade to a supported operating system like OpenWRT (which would give you complete SSH also) or by buying a supported router from a reputable manufacturer and keeping it up to date.
I have myself used OpenWRT on a similar device by D-Link. Installing it will probably also be easier than you expect and you will have SSH access and full control also. In OpenWRT, there are serious advances in how your internet connection gets used more efficiently and also regular security fixes (which you should apply). You might also learn something helpful on the way, like not using telnet in 2018.
Btw. you will do yourself a favor, if you upgrade to something newer with Gigabit Ethernet Ports, and more RAM (like at least 128 MB). You can have a look, whether OpenWRT folks recommend it beforehand, since those are actually the serious users. The Linksys WRT AC1200 seems to be well supported.
answered Aug 5 '18 at 22:21
AdamKalisz
40946
While you make several good points, your answer has very little to do with what was asked. Telnet is a feature that needs to die due to it's serious security risks and implications, however @Mmh asked how to enable it, which you didn't even attempt to address. Might I suggest editing your answer to address that, as well as removing the 1st & 3rd paragraphs? Without an edit, you're likely going to see more down votes. If you edit your answer, I'll remove my down vote.
– JW0914
Aug 6 '18 at 3:54
Thank You for Your time and thought. Please read the question again "I want to access D-Link DIR-600L wireless router via terminal. Can i do this by opening telnet port. [Grammatically, here should be a question mark.]" -> My answer to what the user wants to do is don't, you will hurt yourself and possibly others. Then I offer an overall better solution - SSH and possibly OpenWRT, which also puts you in control of your device. This is what I think the user actually wants.
– AdamKalisz
Aug 6 '18 at 17:18
1
Thank you for considering re-wording your answer, my down vote has been removed.
– JW0914
Aug 7 '18 at 13:45
add a comment |
First of all, don't use telnet - just don't if you can avoid it. Buy a copy of Michael W. Lucas "SSH Mastery 2nd Edition" (which is actually quite approachable) and read it. Telnet is not encrypted (and also has way less functionality than OpenSSH)!
If you want to use telnet anyway:
- Login to the web interface with Your credentials.
- If you use Windows, open cmd.exe from start. (Windows+R type
cmdand press Enter) - Write
telnet <YOUR ROUTERS IP HERE>e.g. liketelnet 192.168.0.100
- Login as
adminand write Your password.
Your D-Link DIR-600L Router has most likely many security vulnerabilities. Please do the internet community a favor and upgrade to a supported operating system like OpenWRT (which would give you complete SSH also) or by buying a supported router from a reputable manufacturer and keeping it up to date.
I have myself used OpenWRT on a similar device by D-Link. Installing it will probably also be easier than you expect and you will have SSH access and full control also. In OpenWRT, there are serious advances in how your internet connection gets used more efficiently and also regular security fixes (which you should apply). You might also learn something helpful on the way, like not using telnet in 2018.
Btw. you will do yourself a favor, if you upgrade to something newer with Gigabit Ethernet Ports, and more RAM (like at least 128 MB). You can have a look, whether OpenWRT folks recommend it beforehand, since those are actually the serious users. The Linksys WRT AC1200 seems to be well supported.
answered Aug 5 '18 at 22:21
AdamKalisz
40946
First of all, don't use telnet - just don't if you can avoid it. Buy a copy of Michael W. Lucas "SSH Mastery 2nd Edition" (which is actually quite approachable) and read it. Telnet is not encrypted (and also has way less functionality than OpenSSH)!
If you want to use telnet anyway:
- Login to the web interface with Your credentials.
- If you use Windows, open cmd.exe from start. (Windows+R type
cmdand press Enter) - Write
telnet <YOUR ROUTERS IP HERE>e.g. liketelnet 192.168.0.100
- Login as
adminand write Your password.
Your D-Link DIR-600L Router has most likely many security vulnerabilities. Please do the internet community a favor and upgrade to a supported operating system like OpenWRT (which would give you complete SSH also) or by buying a supported router from a reputable manufacturer and keeping it up to date.
I have myself used OpenWRT on a similar device by D-Link. Installing it will probably also be easier than you expect and you will have SSH access and full control also. In OpenWRT, there are serious advances in how your internet connection gets used more efficiently and also regular security fixes (which you should apply). You might also learn something helpful on the way, like not using telnet in 2018.
Btw. you will do yourself a favor, if you upgrade to something newer with Gigabit Ethernet Ports, and more RAM (like at least 128 MB). You can have a look, whether OpenWRT folks recommend it beforehand, since those are actually the serious users. The Linksys WRT AC1200 seems to be well supported.
answered Aug 5 '18 at 22:21
AdamKalisz
40946
edited Aug 6 '18 at 17:50
answered Aug 5 '18 at 22:21
AdamKalisz
40946
answered Aug 5 '18 at 22:21
AdamKalisz
40946
answered Aug 5 '18 at 22:21
AdamKalisz
40946
40946
While you make several good points, your answer has very little to do with what was asked. Telnet is a feature that needs to die due to it's serious security risks and implications, however @Mmh asked how to enable it, which you didn't even attempt to address. Might I suggest editing your answer to address that, as well as removing the 1st & 3rd paragraphs? Without an edit, you're likely going to see more down votes. If you edit your answer, I'll remove my down vote.
– JW0914
Aug 6 '18 at 3:54
Thank You for Your time and thought. Please read the question again "I want to access D-Link DIR-600L wireless router via terminal. Can i do this by opening telnet port. [Grammatically, here should be a question mark.]" -> My answer to what the user wants to do is don't, you will hurt yourself and possibly others. Then I offer an overall better solution - SSH and possibly OpenWRT, which also puts you in control of your device. This is what I think the user actually wants.
– AdamKalisz
Aug 6 '18 at 17:18
1
Thank you for considering re-wording your answer, my down vote has been removed.
– JW0914
Aug 7 '18 at 13:45
add a comment |
While you make several good points, your answer has very little to do with what was asked. Telnet is a feature that needs to die due to it's serious security risks and implications, however @Mmh asked how to enable it, which you didn't even attempt to address. Might I suggest editing your answer to address that, as well as removing the 1st & 3rd paragraphs? Without an edit, you're likely going to see more down votes. If you edit your answer, I'll remove my down vote.
– JW0914
Aug 6 '18 at 3:54
Thank You for Your time and thought. Please read the question again "I want to access D-Link DIR-600L wireless router via terminal. Can i do this by opening telnet port. [Grammatically, here should be a question mark.]" -> My answer to what the user wants to do is don't, you will hurt yourself and possibly others. Then I offer an overall better solution - SSH and possibly OpenWRT, which also puts you in control of your device. This is what I think the user actually wants.
– AdamKalisz
Aug 6 '18 at 17:18
1
Thank you for considering re-wording your answer, my down vote has been removed.
– JW0914
Aug 7 '18 at 13:45
While you make several good points, your answer has very little to do with what was asked. Telnet is a feature that needs to die due to it's serious security risks and implications, however @Mmh asked how to enable it, which you didn't even attempt to address. Might I suggest editing your answer to address that, as well as removing the 1st & 3rd paragraphs? Without an edit, you're likely going to see more down votes. If you edit your answer, I'll remove my down vote.
– JW0914
Aug 6 '18 at 3:54
While you make several good points, your answer has very little to do with what was asked. Telnet is a feature that needs to die due to it's serious security risks and implications, however @Mmh asked how to enable it, which you didn't even attempt to address. Might I suggest editing your answer to address that, as well as removing the 1st & 3rd paragraphs? Without an edit, you're likely going to see more down votes. If you edit your answer, I'll remove my down vote.
– JW0914
Aug 6 '18 at 3:54
Thank You for Your time and thought. Please read the question again "I want to access D-Link DIR-600L wireless router via terminal. Can i do this by opening telnet port. [Grammatically, here should be a question mark.]" -> My answer to what the user wants to do is don't, you will hurt yourself and possibly others. Then I offer an overall better solution - SSH and possibly OpenWRT, which also puts you in control of your device. This is what I think the user actually wants.
– AdamKalisz
Aug 6 '18 at 17:18
Thank You for Your time and thought. Please read the question again "I want to access D-Link DIR-600L wireless router via terminal. Can i do this by opening telnet port. [Grammatically, here should be a question mark.]" -> My answer to what the user wants to do is don't, you will hurt yourself and possibly others. Then I offer an overall better solution - SSH and possibly OpenWRT, which also puts you in control of your device. This is what I think the user actually wants.
– AdamKalisz
Aug 6 '18 at 17:18
1
1
Thank you for considering re-wording your answer, my down vote has been removed.
– JW0914
Aug 7 '18 at 13:45
Thank you for considering re-wording your answer, my down vote has been removed.
– JW0914
Aug 7 '18 at 13:45
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f934944%2fhow-to-open-telnet-port-in-wireless-d-link-router%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
If the router really supports telnet (or some other remote terminal access), you should be able to find the answer to your question on the user's manual.
– Larssend
Jul 1 '15 at 9:55
1
Apparently you can with some kind of hack whether it's advisable or not I don't know spect.cl/blog/2011/12/d-link-dir-600-command-injection
– barlop
Jul 1 '15 at 9:58
As mentioned by quannt you should be able to enable this via the web interface but you should avoid Telnet as it is not secure. SSH is a much better option.
– mk444
Jan 11 '16 at 4:39