Where can I get Windows XP drivers for MacBook Pro hardware without using Boot Camp?
up vote
5
down vote
favorite
I have an Intel-based MacBook Pro whose hard disk was formatted before I received it. It had no OS installed, and I have no Mac OS X installation disks.
I’m trying to get the machine to run some version of WindowsXP or later version of Windows with all hardware (especially network adapters) working with proper drivers. I would like to do so legally and for the lowest price possible. How do I do this?
I have installed a copy of Windows XP SP2 onto the machine using an old CD and key I had lying around. This is the only OS installed on the machine.
The machine boots into XP without problems, but some devices—most notably, the Ethernet and the Wi-Fi network adapters--do not have drivers. I have tried all of the following steps to get the network adapters to work:
I have attempted to run the Boot Camp - Windows XP Drivers Update 2.1 executable. Unsurprisingly, this did not work; the failure message stated that I did not have the appropriate drivers installed and the documentation clearly states:
Important: Installation of Boot Camp 2.1 is required before installing
Windows XP Service Pack 3 (SP3)
From another MacBook Pro, I ran the “Boot Camp Assistant.” I selected the option to “Download the latest Windows support software from Apple,” put the download onto a USB flash drive and attempted to run the executables on the Windows XP MacBook Pro. This too failed: “The file is not a proper executable” or somesuch. This too is unsurprising, considering
- The hardware differences between the different MacBook Pros.
- The fact that the Windows XP machine has never used any form of Boot Camp.
- The fact that I am using a USB flash drive when the “Boot Camp Assistant” states that I need a FAT32-formatted external external hard disk drive. Due to budgetary constraints, I do not have access to an external hard disk drive.
I have done the digging here on SuperUser. I have found two SuperUser questions—this one and this one—to have relevant questions but inapplicable answers.
windows-xp drivers macbook-pro boot-camp setup
edited Mar 20 '17 at 10:04
Community♦
1
asked Oct 6 '13 at 19:03
bobocopy
12613
add a comment |
up vote
5
down vote
favorite
I have an Intel-based MacBook Pro whose hard disk was formatted before I received it. It had no OS installed, and I have no Mac OS X installation disks.
I’m trying to get the machine to run some version of WindowsXP or later version of Windows with all hardware (especially network adapters) working with proper drivers. I would like to do so legally and for the lowest price possible. How do I do this?
I have installed a copy of Windows XP SP2 onto the machine using an old CD and key I had lying around. This is the only OS installed on the machine.
The machine boots into XP without problems, but some devices—most notably, the Ethernet and the Wi-Fi network adapters--do not have drivers. I have tried all of the following steps to get the network adapters to work:
I have attempted to run the Boot Camp - Windows XP Drivers Update 2.1 executable. Unsurprisingly, this did not work; the failure message stated that I did not have the appropriate drivers installed and the documentation clearly states:
Important: Installation of Boot Camp 2.1 is required before installing
Windows XP Service Pack 3 (SP3)
From another MacBook Pro, I ran the “Boot Camp Assistant.” I selected the option to “Download the latest Windows support software from Apple,” put the download onto a USB flash drive and attempted to run the executables on the Windows XP MacBook Pro. This too failed: “The file is not a proper executable” or somesuch. This too is unsurprising, considering
- The hardware differences between the different MacBook Pros.
- The fact that the Windows XP machine has never used any form of Boot Camp.
- The fact that I am using a USB flash drive when the “Boot Camp Assistant” states that I need a FAT32-formatted external external hard disk drive. Due to budgetary constraints, I do not have access to an external hard disk drive.
I have done the digging here on SuperUser. I have found two SuperUser questions—this one and this one—to have relevant questions but inapplicable answers.
windows-xp drivers macbook-pro boot-camp setup
edited Mar 20 '17 at 10:04
Community♦
1
asked Oct 6 '13 at 19:03
bobocopy
12613
Have you tried checking with Intel's support pages? They generally bundle most/all their Network adapter drivers in one set ("ProSet")
– Ƭᴇcʜιᴇ007
Oct 6 '13 at 19:12
Excellent idea. Per your suggestion, I just tried it. I got a message: "Cannot install drivers. No Intel(R) Adapters are present in this computer." Presumably though, if I can figure out what kind of network adapter this MBP has, I can just find the drivers in the wild somewhere.
– bobocopy
Oct 6 '13 at 20:49
I know this is not the question: But why install XP? It is no longer supported so you can install it but then you should not connect it to any network, not use any pen drives, etc etc. That usually makes it pretty useless. That leaves two other options: 1) Somehow recover the OSX install media. 2) Install a much more modern windows. Which will also use different drivers. The last is why I am posting this before you spent ages looking for ancient 32 bit XP drivers.
– Hennes
Jun 29 '15 at 13:25
add a comment |
up vote
5
down vote
favorite
up vote
5
down vote
favorite
I have an Intel-based MacBook Pro whose hard disk was formatted before I received it. It had no OS installed, and I have no Mac OS X installation disks.
I’m trying to get the machine to run some version of WindowsXP or later version of Windows with all hardware (especially network adapters) working with proper drivers. I would like to do so legally and for the lowest price possible. How do I do this?
I have installed a copy of Windows XP SP2 onto the machine using an old CD and key I had lying around. This is the only OS installed on the machine.
The machine boots into XP without problems, but some devices—most notably, the Ethernet and the Wi-Fi network adapters--do not have drivers. I have tried all of the following steps to get the network adapters to work:
I have attempted to run the Boot Camp - Windows XP Drivers Update 2.1 executable. Unsurprisingly, this did not work; the failure message stated that I did not have the appropriate drivers installed and the documentation clearly states:
Important: Installation of Boot Camp 2.1 is required before installing
Windows XP Service Pack 3 (SP3)
From another MacBook Pro, I ran the “Boot Camp Assistant.” I selected the option to “Download the latest Windows support software from Apple,” put the download onto a USB flash drive and attempted to run the executables on the Windows XP MacBook Pro. This too failed: “The file is not a proper executable” or somesuch. This too is unsurprising, considering
- The hardware differences between the different MacBook Pros.
- The fact that the Windows XP machine has never used any form of Boot Camp.
- The fact that I am using a USB flash drive when the “Boot Camp Assistant” states that I need a FAT32-formatted external external hard disk drive. Due to budgetary constraints, I do not have access to an external hard disk drive.
I have done the digging here on SuperUser. I have found two SuperUser questions—this one and this one—to have relevant questions but inapplicable answers.
windows-xp drivers macbook-pro boot-camp setup
edited Mar 20 '17 at 10:04
Community♦
1
asked Oct 6 '13 at 19:03
bobocopy
12613
I have an Intel-based MacBook Pro whose hard disk was formatted before I received it. It had no OS installed, and I have no Mac OS X installation disks.
I’m trying to get the machine to run some version of WindowsXP or later version of Windows with all hardware (especially network adapters) working with proper drivers. I would like to do so legally and for the lowest price possible. How do I do this?
I have installed a copy of Windows XP SP2 onto the machine using an old CD and key I had lying around. This is the only OS installed on the machine.
The machine boots into XP without problems, but some devices—most notably, the Ethernet and the Wi-Fi network adapters--do not have drivers. I have tried all of the following steps to get the network adapters to work:
I have attempted to run the Boot Camp - Windows XP Drivers Update 2.1 executable. Unsurprisingly, this did not work; the failure message stated that I did not have the appropriate drivers installed and the documentation clearly states:
Important: Installation of Boot Camp 2.1 is required before installing
Windows XP Service Pack 3 (SP3)
From another MacBook Pro, I ran the “Boot Camp Assistant.” I selected the option to “Download the latest Windows support software from Apple,” put the download onto a USB flash drive and attempted to run the executables on the Windows XP MacBook Pro. This too failed: “The file is not a proper executable” or somesuch. This too is unsurprising, considering
- The hardware differences between the different MacBook Pros.
- The fact that the Windows XP machine has never used any form of Boot Camp.
- The fact that I am using a USB flash drive when the “Boot Camp Assistant” states that I need a FAT32-formatted external external hard disk drive. Due to budgetary constraints, I do not have access to an external hard disk drive.
I have done the digging here on SuperUser. I have found two SuperUser questions—this one and this one—to have relevant questions but inapplicable answers.
windows-xp drivers macbook-pro boot-camp setup
windows-xp drivers macbook-pro boot-camp setup
edited Mar 20 '17 at 10:04
Community♦
1
asked Oct 6 '13 at 19:03
bobocopy
12613
edited Mar 20 '17 at 10:04
Community♦
1
asked Oct 6 '13 at 19:03
bobocopy
12613
edited Mar 20 '17 at 10:04
Community♦
1
edited Mar 20 '17 at 10:04
Community♦
1
edited Mar 20 '17 at 10:04
Community♦
1
1
asked Oct 6 '13 at 19:03
bobocopy
12613
asked Oct 6 '13 at 19:03
bobocopy
12613
asked Oct 6 '13 at 19:03
bobocopy
12613
12613
Have you tried checking with Intel's support pages? They generally bundle most/all their Network adapter drivers in one set ("ProSet")
– Ƭᴇcʜιᴇ007
Oct 6 '13 at 19:12
Excellent idea. Per your suggestion, I just tried it. I got a message: "Cannot install drivers. No Intel(R) Adapters are present in this computer." Presumably though, if I can figure out what kind of network adapter this MBP has, I can just find the drivers in the wild somewhere.
– bobocopy
Oct 6 '13 at 20:49
I know this is not the question: But why install XP? It is no longer supported so you can install it but then you should not connect it to any network, not use any pen drives, etc etc. That usually makes it pretty useless. That leaves two other options: 1) Somehow recover the OSX install media. 2) Install a much more modern windows. Which will also use different drivers. The last is why I am posting this before you spent ages looking for ancient 32 bit XP drivers.
– Hennes
Jun 29 '15 at 13:25
add a comment |
Have you tried checking with Intel's support pages? They generally bundle most/all their Network adapter drivers in one set ("ProSet")
– Ƭᴇcʜιᴇ007
Oct 6 '13 at 19:12
Excellent idea. Per your suggestion, I just tried it. I got a message: "Cannot install drivers. No Intel(R) Adapters are present in this computer." Presumably though, if I can figure out what kind of network adapter this MBP has, I can just find the drivers in the wild somewhere.
– bobocopy
Oct 6 '13 at 20:49
I know this is not the question: But why install XP? It is no longer supported so you can install it but then you should not connect it to any network, not use any pen drives, etc etc. That usually makes it pretty useless. That leaves two other options: 1) Somehow recover the OSX install media. 2) Install a much more modern windows. Which will also use different drivers. The last is why I am posting this before you spent ages looking for ancient 32 bit XP drivers.
– Hennes
Jun 29 '15 at 13:25
Have you tried checking with Intel's support pages? They generally bundle most/all their Network adapter drivers in one set ("ProSet")
– Ƭᴇcʜιᴇ007
Oct 6 '13 at 19:12
Have you tried checking with Intel's support pages? They generally bundle most/all their Network adapter drivers in one set ("ProSet")
– Ƭᴇcʜιᴇ007
Oct 6 '13 at 19:12
Excellent idea. Per your suggestion, I just tried it. I got a message: "Cannot install drivers. No Intel(R) Adapters are present in this computer." Presumably though, if I can figure out what kind of network adapter this MBP has, I can just find the drivers in the wild somewhere.
– bobocopy
Oct 6 '13 at 20:49
Excellent idea. Per your suggestion, I just tried it. I got a message: "Cannot install drivers. No Intel(R) Adapters are present in this computer." Presumably though, if I can figure out what kind of network adapter this MBP has, I can just find the drivers in the wild somewhere.
– bobocopy
Oct 6 '13 at 20:49
I know this is not the question: But why install XP? It is no longer supported so you can install it but then you should not connect it to any network, not use any pen drives, etc etc. That usually makes it pretty useless. That leaves two other options: 1) Somehow recover the OSX install media. 2) Install a much more modern windows. Which will also use different drivers. The last is why I am posting this before you spent ages looking for ancient 32 bit XP drivers.
– Hennes
Jun 29 '15 at 13:25
I know this is not the question: But why install XP? It is no longer supported so you can install it but then you should not connect it to any network, not use any pen drives, etc etc. That usually makes it pretty useless. That leaves two other options: 1) Somehow recover the OSX install media. 2) Install a much more modern windows. Which will also use different drivers. The last is why I am posting this before you spent ages looking for ancient 32 bit XP drivers.
– Hennes
Jun 29 '15 at 13:25
add a comment |
1 Answer
1
active
oldest
votes
up vote
0
down vote
You can use Hardware ID to find out the Devices.
http://www.pcidatabase.com/ will give the option to find out the device from Hardware Id
Or you can use unknown device identifier application
answered Jun 29 '15 at 13:19
Prasad Padmanabhan Nair
1
1
This would be a better answer if you explain how to get the Hardware ID.
– DavidPostill♦
Jun 29 '15 at 13:26
That can be pulled out from device manager > driver properties > Driver details > hardware ID section
– pun
Oct 4 '15 at 3:37
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
You can use Hardware ID to find out the Devices.
http://www.pcidatabase.com/ will give the option to find out the device from Hardware Id
Or you can use unknown device identifier application
answered Jun 29 '15 at 13:19
Prasad Padmanabhan Nair
1
1
This would be a better answer if you explain how to get the Hardware ID.
– DavidPostill♦
Jun 29 '15 at 13:26
That can be pulled out from device manager > driver properties > Driver details > hardware ID section
– pun
Oct 4 '15 at 3:37
add a comment |
up vote
0
down vote
You can use Hardware ID to find out the Devices.
http://www.pcidatabase.com/ will give the option to find out the device from Hardware Id
Or you can use unknown device identifier application
answered Jun 29 '15 at 13:19
Prasad Padmanabhan Nair
1
1
This would be a better answer if you explain how to get the Hardware ID.
– DavidPostill♦
Jun 29 '15 at 13:26
That can be pulled out from device manager > driver properties > Driver details > hardware ID section
– pun
Oct 4 '15 at 3:37
add a comment |
up vote
0
down vote
up vote
0
down vote
You can use Hardware ID to find out the Devices.
http://www.pcidatabase.com/ will give the option to find out the device from Hardware Id
Or you can use unknown device identifier application
answered Jun 29 '15 at 13:19
Prasad Padmanabhan Nair
1
You can use Hardware ID to find out the Devices.
http://www.pcidatabase.com/ will give the option to find out the device from Hardware Id
Or you can use unknown device identifier application
answered Jun 29 '15 at 13:19
Prasad Padmanabhan Nair
1
answered Jun 29 '15 at 13:19
Prasad Padmanabhan Nair
1
answered Jun 29 '15 at 13:19
Prasad Padmanabhan Nair
1
answered Jun 29 '15 at 13:19
Prasad Padmanabhan Nair
1
1
1
This would be a better answer if you explain how to get the Hardware ID.
– DavidPostill♦
Jun 29 '15 at 13:26
That can be pulled out from device manager > driver properties > Driver details > hardware ID section
– pun
Oct 4 '15 at 3:37
add a comment |
1
This would be a better answer if you explain how to get the Hardware ID.
– DavidPostill♦
Jun 29 '15 at 13:26
That can be pulled out from device manager > driver properties > Driver details > hardware ID section
– pun
Oct 4 '15 at 3:37
1
1
This would be a better answer if you explain how to get the Hardware ID.
– DavidPostill♦
Jun 29 '15 at 13:26
This would be a better answer if you explain how to get the Hardware ID.
– DavidPostill♦
Jun 29 '15 at 13:26
That can be pulled out from device manager > driver properties > Driver details > hardware ID section
– pun
Oct 4 '15 at 3:37
That can be pulled out from device manager > driver properties > Driver details > hardware ID section
– pun
Oct 4 '15 at 3:37
add a comment |
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f655191%2fwhere-can-i-get-windows-xp-drivers-for-macbook-pro-hardware-without-using-boot-c%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Have you tried checking with Intel's support pages? They generally bundle most/all their Network adapter drivers in one set ("ProSet")
– Ƭᴇcʜιᴇ007
Oct 6 '13 at 19:12
Excellent idea. Per your suggestion, I just tried it. I got a message: "Cannot install drivers. No Intel(R) Adapters are present in this computer." Presumably though, if I can figure out what kind of network adapter this MBP has, I can just find the drivers in the wild somewhere.
– bobocopy
Oct 6 '13 at 20:49
I know this is not the question: But why install XP? It is no longer supported so you can install it but then you should not connect it to any network, not use any pen drives, etc etc. That usually makes it pretty useless. That leaves two other options: 1) Somehow recover the OSX install media. 2) Install a much more modern windows. Which will also use different drivers. The last is why I am posting this before you spent ages looking for ancient 32 bit XP drivers.
– Hennes
Jun 29 '15 at 13:25