Why is there a minimum altitude for at least some high-speed jet engine restarts?
While reading this other question about envelope constraints for jet-engine restarts, I noticed something odd in the graph provided (of the relight envelope for the Honeywell HTF7000 medium-bypass turbofan):
(Image obtained from a post by wbeard52, original source unknown but presumed to be either wbeard52 or public-domain)
Notice how, although the airstart envelope extends right down to -1kft pressure altitude at speeds not exceeding 250KIAS, it suddenly jumps up to 5kft at speeds of 250-300KIAS, and then up to 8kft at even greater speeds. At first blush, I thought that this had to do with the FAA prohibition on exceeding 250KIAS below 10kft, but, on closer examination, it's clear that this can't be the case, since, if that were the culprit, one would expect the lower boundary of the envelope to jump straight up to 10kft at 250KIAS.
The jump in the minimum relight altitude coincides with the minimum speed for a windmill start, indicating that there might be something about the process of windmill-starting an engine that would preclude a low-altitude relight - but, in that case, why doesn't the starter-only-relight envelope extend to higher speeds under the floor of the windmilling envelope? Is this problem unique to the HTF7000, or do other jets have it too? What causes it, anyway?
jet-engine engine-failure engine-starting
asked 8 hours ago
Sean
3,44622156
add a comment |
While reading this other question about envelope constraints for jet-engine restarts, I noticed something odd in the graph provided (of the relight envelope for the Honeywell HTF7000 medium-bypass turbofan):
(Image obtained from a post by wbeard52, original source unknown but presumed to be either wbeard52 or public-domain)
Notice how, although the airstart envelope extends right down to -1kft pressure altitude at speeds not exceeding 250KIAS, it suddenly jumps up to 5kft at speeds of 250-300KIAS, and then up to 8kft at even greater speeds. At first blush, I thought that this had to do with the FAA prohibition on exceeding 250KIAS below 10kft, but, on closer examination, it's clear that this can't be the case, since, if that were the culprit, one would expect the lower boundary of the envelope to jump straight up to 10kft at 250KIAS.
The jump in the minimum relight altitude coincides with the minimum speed for a windmill start, indicating that there might be something about the process of windmill-starting an engine that would preclude a low-altitude relight - but, in that case, why doesn't the starter-only-relight envelope extend to higher speeds under the floor of the windmilling envelope? Is this problem unique to the HTF7000, or do other jets have it too? What causes it, anyway?
jet-engine engine-failure engine-starting
asked 8 hours ago
Sean
3,44622156
add a comment |
While reading this other question about envelope constraints for jet-engine restarts, I noticed something odd in the graph provided (of the relight envelope for the Honeywell HTF7000 medium-bypass turbofan):
(Image obtained from a post by wbeard52, original source unknown but presumed to be either wbeard52 or public-domain)
Notice how, although the airstart envelope extends right down to -1kft pressure altitude at speeds not exceeding 250KIAS, it suddenly jumps up to 5kft at speeds of 250-300KIAS, and then up to 8kft at even greater speeds. At first blush, I thought that this had to do with the FAA prohibition on exceeding 250KIAS below 10kft, but, on closer examination, it's clear that this can't be the case, since, if that were the culprit, one would expect the lower boundary of the envelope to jump straight up to 10kft at 250KIAS.
The jump in the minimum relight altitude coincides with the minimum speed for a windmill start, indicating that there might be something about the process of windmill-starting an engine that would preclude a low-altitude relight - but, in that case, why doesn't the starter-only-relight envelope extend to higher speeds under the floor of the windmilling envelope? Is this problem unique to the HTF7000, or do other jets have it too? What causes it, anyway?
jet-engine engine-failure engine-starting
asked 8 hours ago
Sean
3,44622156
While reading this other question about envelope constraints for jet-engine restarts, I noticed something odd in the graph provided (of the relight envelope for the Honeywell HTF7000 medium-bypass turbofan):
(Image obtained from a post by wbeard52, original source unknown but presumed to be either wbeard52 or public-domain)
Notice how, although the airstart envelope extends right down to -1kft pressure altitude at speeds not exceeding 250KIAS, it suddenly jumps up to 5kft at speeds of 250-300KIAS, and then up to 8kft at even greater speeds. At first blush, I thought that this had to do with the FAA prohibition on exceeding 250KIAS below 10kft, but, on closer examination, it's clear that this can't be the case, since, if that were the culprit, one would expect the lower boundary of the envelope to jump straight up to 10kft at 250KIAS.
The jump in the minimum relight altitude coincides with the minimum speed for a windmill start, indicating that there might be something about the process of windmill-starting an engine that would preclude a low-altitude relight - but, in that case, why doesn't the starter-only-relight envelope extend to higher speeds under the floor of the windmilling envelope? Is this problem unique to the HTF7000, or do other jets have it too? What causes it, anyway?
jet-engine engine-failure engine-starting
jet-engine engine-failure engine-starting
asked 8 hours ago
Sean
3,44622156
asked 8 hours ago
Sean
3,44622156
asked 8 hours ago
Sean
3,44622156
asked 8 hours ago
Sean
3,44622156
asked 8 hours ago
Sean
3,44622156
3,44622156
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
Generally when you see those kinds of limitations it means that the engine or airframe developer had trouble getting successful, repeatable relights outside of the published envelope during development flight testing and you do see it with other engines (the CF-34 that I am familiar with has a similar but much less extreme limitation).
In that case it is probably related to density/velocity of the air flow into the burner can during windmilling and I would imagine that there were issues with getting a successful lightoff every time, or excessive peak ITT during the start, or maybe surging problems or something like that.
You'd have to talk to a Honeywell person for those details.
answered 6 hours ago
John K
13.9k11543
1
I realise that the starter-assist envelope goes right up to Vmo at altitude; the part of my question I think you were referring to there was asking why the starter-assist envelope didn't also extend to Vmo even at altitudes below the floor of the windmill envelope.
– Sean
6 hours ago
1
OK I removed that paragraph. Well I'd say the same reason applies as with windmill. Too much flow energy coming in by ram effect.
– John K
2 hours ago
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "528"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faviation.stackexchange.com%2fquestions%2f58568%2fwhy-is-there-a-minimum-altitude-for-at-least-some-high-speed-jet-engine-restarts%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Generally when you see those kinds of limitations it means that the engine or airframe developer had trouble getting successful, repeatable relights outside of the published envelope during development flight testing and you do see it with other engines (the CF-34 that I am familiar with has a similar but much less extreme limitation).
In that case it is probably related to density/velocity of the air flow into the burner can during windmilling and I would imagine that there were issues with getting a successful lightoff every time, or excessive peak ITT during the start, or maybe surging problems or something like that.
You'd have to talk to a Honeywell person for those details.
answered 6 hours ago
John K
13.9k11543
1
I realise that the starter-assist envelope goes right up to Vmo at altitude; the part of my question I think you were referring to there was asking why the starter-assist envelope didn't also extend to Vmo even at altitudes below the floor of the windmill envelope.
– Sean
6 hours ago
1
OK I removed that paragraph. Well I'd say the same reason applies as with windmill. Too much flow energy coming in by ram effect.
– John K
2 hours ago
add a comment |
Generally when you see those kinds of limitations it means that the engine or airframe developer had trouble getting successful, repeatable relights outside of the published envelope during development flight testing and you do see it with other engines (the CF-34 that I am familiar with has a similar but much less extreme limitation).
In that case it is probably related to density/velocity of the air flow into the burner can during windmilling and I would imagine that there were issues with getting a successful lightoff every time, or excessive peak ITT during the start, or maybe surging problems or something like that.
You'd have to talk to a Honeywell person for those details.
answered 6 hours ago
John K
13.9k11543
1
I realise that the starter-assist envelope goes right up to Vmo at altitude; the part of my question I think you were referring to there was asking why the starter-assist envelope didn't also extend to Vmo even at altitudes below the floor of the windmill envelope.
– Sean
6 hours ago
1
OK I removed that paragraph. Well I'd say the same reason applies as with windmill. Too much flow energy coming in by ram effect.
– John K
2 hours ago
add a comment |
Generally when you see those kinds of limitations it means that the engine or airframe developer had trouble getting successful, repeatable relights outside of the published envelope during development flight testing and you do see it with other engines (the CF-34 that I am familiar with has a similar but much less extreme limitation).
In that case it is probably related to density/velocity of the air flow into the burner can during windmilling and I would imagine that there were issues with getting a successful lightoff every time, or excessive peak ITT during the start, or maybe surging problems or something like that.
You'd have to talk to a Honeywell person for those details.
answered 6 hours ago
John K
13.9k11543
Generally when you see those kinds of limitations it means that the engine or airframe developer had trouble getting successful, repeatable relights outside of the published envelope during development flight testing and you do see it with other engines (the CF-34 that I am familiar with has a similar but much less extreme limitation).
In that case it is probably related to density/velocity of the air flow into the burner can during windmilling and I would imagine that there were issues with getting a successful lightoff every time, or excessive peak ITT during the start, or maybe surging problems or something like that.
You'd have to talk to a Honeywell person for those details.
answered 6 hours ago
John K
13.9k11543
edited 2 hours ago
answered 6 hours ago
John K
13.9k11543
answered 6 hours ago
John K
13.9k11543
answered 6 hours ago
John K
13.9k11543
13.9k11543
1
I realise that the starter-assist envelope goes right up to Vmo at altitude; the part of my question I think you were referring to there was asking why the starter-assist envelope didn't also extend to Vmo even at altitudes below the floor of the windmill envelope.
– Sean
6 hours ago
1
OK I removed that paragraph. Well I'd say the same reason applies as with windmill. Too much flow energy coming in by ram effect.
– John K
2 hours ago
add a comment |
1
I realise that the starter-assist envelope goes right up to Vmo at altitude; the part of my question I think you were referring to there was asking why the starter-assist envelope didn't also extend to Vmo even at altitudes below the floor of the windmill envelope.
– Sean
6 hours ago
1
OK I removed that paragraph. Well I'd say the same reason applies as with windmill. Too much flow energy coming in by ram effect.
– John K
2 hours ago
1
1
I realise that the starter-assist envelope goes right up to Vmo at altitude; the part of my question I think you were referring to there was asking why the starter-assist envelope didn't also extend to Vmo even at altitudes below the floor of the windmill envelope.
– Sean
6 hours ago
I realise that the starter-assist envelope goes right up to Vmo at altitude; the part of my question I think you were referring to there was asking why the starter-assist envelope didn't also extend to Vmo even at altitudes below the floor of the windmill envelope.
– Sean
6 hours ago
1
1
OK I removed that paragraph. Well I'd say the same reason applies as with windmill. Too much flow energy coming in by ram effect.
– John K
2 hours ago
OK I removed that paragraph. Well I'd say the same reason applies as with windmill. Too much flow energy coming in by ram effect.
– John K
2 hours ago
add a comment |
Thanks for contributing an answer to Aviation Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faviation.stackexchange.com%2fquestions%2f58568%2fwhy-is-there-a-minimum-altitude-for-at-least-some-high-speed-jet-engine-restarts%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
