Can hanger extender be used as replaceable hanger?
up vote
1
down vote
favorite
One advantage of replaceable hanger for rear derailleur is that you can replace it (opposite to fixed hanger). I have fixed hanger (or fixed frame) and although it is a steel frame I started wondering if I could add hanger extender as a protection tool.
One point I can see it might fail to protect anything that extender is pretty short (comparing to hanger), it is more solid and there is no really a point where it could bend.
So would it be an overkill (over-protection) and it won't protect anything or is it actually a good idea?
derailleur-hanger frame-protection
add a comment |
up vote
1
down vote
favorite
One advantage of replaceable hanger for rear derailleur is that you can replace it (opposite to fixed hanger). I have fixed hanger (or fixed frame) and although it is a steel frame I started wondering if I could add hanger extender as a protection tool.
One point I can see it might fail to protect anything that extender is pretty short (comparing to hanger), it is more solid and there is no really a point where it could bend.
So would it be an overkill (over-protection) and it won't protect anything or is it actually a good idea?
derailleur-hanger frame-protection
1
One option to protect the derailer is to install a derailer guard on the dropout.
– Daniel R Hicks
2 days ago
1
The derailer guard acts as a lever and actually helps to destroy the frame. This is why they haven't been common since the 90s.
– ojs
2 days ago
@DanielRHicks, misunderstanding -- I want to protect the frame, not the derailleur.
– greenoldman
yesterday
add a comment |
up vote
1
down vote
favorite
up vote
1
down vote
favorite
One advantage of replaceable hanger for rear derailleur is that you can replace it (opposite to fixed hanger). I have fixed hanger (or fixed frame) and although it is a steel frame I started wondering if I could add hanger extender as a protection tool.
One point I can see it might fail to protect anything that extender is pretty short (comparing to hanger), it is more solid and there is no really a point where it could bend.
So would it be an overkill (over-protection) and it won't protect anything or is it actually a good idea?
derailleur-hanger frame-protection
One advantage of replaceable hanger for rear derailleur is that you can replace it (opposite to fixed hanger). I have fixed hanger (or fixed frame) and although it is a steel frame I started wondering if I could add hanger extender as a protection tool.
One point I can see it might fail to protect anything that extender is pretty short (comparing to hanger), it is more solid and there is no really a point where it could bend.
So would it be an overkill (over-protection) and it won't protect anything or is it actually a good idea?
derailleur-hanger frame-protection
derailleur-hanger frame-protection
asked 2 days ago
greenoldman
6171719
6171719
1
One option to protect the derailer is to install a derailer guard on the dropout.
– Daniel R Hicks
2 days ago
1
The derailer guard acts as a lever and actually helps to destroy the frame. This is why they haven't been common since the 90s.
– ojs
2 days ago
@DanielRHicks, misunderstanding -- I want to protect the frame, not the derailleur.
– greenoldman
yesterday
add a comment |
1
One option to protect the derailer is to install a derailer guard on the dropout.
– Daniel R Hicks
2 days ago
1
The derailer guard acts as a lever and actually helps to destroy the frame. This is why they haven't been common since the 90s.
– ojs
2 days ago
@DanielRHicks, misunderstanding -- I want to protect the frame, not the derailleur.
– greenoldman
yesterday
1
1
One option to protect the derailer is to install a derailer guard on the dropout.
– Daniel R Hicks
2 days ago
One option to protect the derailer is to install a derailer guard on the dropout.
– Daniel R Hicks
2 days ago
1
1
The derailer guard acts as a lever and actually helps to destroy the frame. This is why they haven't been common since the 90s.
– ojs
2 days ago
The derailer guard acts as a lever and actually helps to destroy the frame. This is why they haven't been common since the 90s.
– ojs
2 days ago
@DanielRHicks, misunderstanding -- I want to protect the frame, not the derailleur.
– greenoldman
yesterday
@DanielRHicks, misunderstanding -- I want to protect the frame, not the derailleur.
– greenoldman
yesterday
add a comment |
2 Answers
2
active
oldest
votes
up vote
3
down vote
accepted
I doubt it. There is a good chance that the extender is sturdier than the fixed derailleur hanger, in which case it would add leverage, making a bent or broken hanger even more likely.
add a comment |
up vote
2
down vote
No, a hanger extender cannot be used as replaceable hanger for the following reason: a hanger extender is bolted on where the current derailleur is bolted on (in the current hanger thus) allowing the derailleur to be bolted on even lower.
Thus, a hanger extender extends the current hanger (fixed or attached).
If you want to protect yourself against the damage of the current hanger simply be careful. And before you damage your hanger take the measurements of it or try to find a replaceable hanger that may fit your dropout. And once your fixed hanger is damaged simply cut it off and put the replacement.
Thank you but just a clarification, I didn't mean a replacement as 1:1 change of parts, I meant using it as protection tool, in the same sense as the hanger was "detached" from the frame (creating replaceable hanger) to protect it.
– greenoldman
yesterday
You mean like a circuit breaker (a fuse) in an electric circuit? Adding a weaker part so it breaks instead of the fixed hanger? One question - is it a road bike or mountain/gravel (rough terrain) bike?
– Mike
yesterday
Mike, exactly, like a fuse. It is a gravel bike with mounted MTB rear derailleur.
– greenoldman
12 hours ago
add a comment |
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
3
down vote
accepted
I doubt it. There is a good chance that the extender is sturdier than the fixed derailleur hanger, in which case it would add leverage, making a bent or broken hanger even more likely.
add a comment |
up vote
3
down vote
accepted
I doubt it. There is a good chance that the extender is sturdier than the fixed derailleur hanger, in which case it would add leverage, making a bent or broken hanger even more likely.
add a comment |
up vote
3
down vote
accepted
up vote
3
down vote
accepted
I doubt it. There is a good chance that the extender is sturdier than the fixed derailleur hanger, in which case it would add leverage, making a bent or broken hanger even more likely.
I doubt it. There is a good chance that the extender is sturdier than the fixed derailleur hanger, in which case it would add leverage, making a bent or broken hanger even more likely.
answered 2 days ago
Michael
2,560514
2,560514
add a comment |
add a comment |
up vote
2
down vote
No, a hanger extender cannot be used as replaceable hanger for the following reason: a hanger extender is bolted on where the current derailleur is bolted on (in the current hanger thus) allowing the derailleur to be bolted on even lower.
Thus, a hanger extender extends the current hanger (fixed or attached).
If you want to protect yourself against the damage of the current hanger simply be careful. And before you damage your hanger take the measurements of it or try to find a replaceable hanger that may fit your dropout. And once your fixed hanger is damaged simply cut it off and put the replacement.
Thank you but just a clarification, I didn't mean a replacement as 1:1 change of parts, I meant using it as protection tool, in the same sense as the hanger was "detached" from the frame (creating replaceable hanger) to protect it.
– greenoldman
yesterday
You mean like a circuit breaker (a fuse) in an electric circuit? Adding a weaker part so it breaks instead of the fixed hanger? One question - is it a road bike or mountain/gravel (rough terrain) bike?
– Mike
yesterday
Mike, exactly, like a fuse. It is a gravel bike with mounted MTB rear derailleur.
– greenoldman
12 hours ago
add a comment |
up vote
2
down vote
No, a hanger extender cannot be used as replaceable hanger for the following reason: a hanger extender is bolted on where the current derailleur is bolted on (in the current hanger thus) allowing the derailleur to be bolted on even lower.
Thus, a hanger extender extends the current hanger (fixed or attached).
If you want to protect yourself against the damage of the current hanger simply be careful. And before you damage your hanger take the measurements of it or try to find a replaceable hanger that may fit your dropout. And once your fixed hanger is damaged simply cut it off and put the replacement.
Thank you but just a clarification, I didn't mean a replacement as 1:1 change of parts, I meant using it as protection tool, in the same sense as the hanger was "detached" from the frame (creating replaceable hanger) to protect it.
– greenoldman
yesterday
You mean like a circuit breaker (a fuse) in an electric circuit? Adding a weaker part so it breaks instead of the fixed hanger? One question - is it a road bike or mountain/gravel (rough terrain) bike?
– Mike
yesterday
Mike, exactly, like a fuse. It is a gravel bike with mounted MTB rear derailleur.
– greenoldman
12 hours ago
add a comment |
up vote
2
down vote
up vote
2
down vote
No, a hanger extender cannot be used as replaceable hanger for the following reason: a hanger extender is bolted on where the current derailleur is bolted on (in the current hanger thus) allowing the derailleur to be bolted on even lower.
Thus, a hanger extender extends the current hanger (fixed or attached).
If you want to protect yourself against the damage of the current hanger simply be careful. And before you damage your hanger take the measurements of it or try to find a replaceable hanger that may fit your dropout. And once your fixed hanger is damaged simply cut it off and put the replacement.
No, a hanger extender cannot be used as replaceable hanger for the following reason: a hanger extender is bolted on where the current derailleur is bolted on (in the current hanger thus) allowing the derailleur to be bolted on even lower.
Thus, a hanger extender extends the current hanger (fixed or attached).
If you want to protect yourself against the damage of the current hanger simply be careful. And before you damage your hanger take the measurements of it or try to find a replaceable hanger that may fit your dropout. And once your fixed hanger is damaged simply cut it off and put the replacement.
answered 2 days ago
Mike
3,2061025
3,2061025
Thank you but just a clarification, I didn't mean a replacement as 1:1 change of parts, I meant using it as protection tool, in the same sense as the hanger was "detached" from the frame (creating replaceable hanger) to protect it.
– greenoldman
yesterday
You mean like a circuit breaker (a fuse) in an electric circuit? Adding a weaker part so it breaks instead of the fixed hanger? One question - is it a road bike or mountain/gravel (rough terrain) bike?
– Mike
yesterday
Mike, exactly, like a fuse. It is a gravel bike with mounted MTB rear derailleur.
– greenoldman
12 hours ago
add a comment |
Thank you but just a clarification, I didn't mean a replacement as 1:1 change of parts, I meant using it as protection tool, in the same sense as the hanger was "detached" from the frame (creating replaceable hanger) to protect it.
– greenoldman
yesterday
You mean like a circuit breaker (a fuse) in an electric circuit? Adding a weaker part so it breaks instead of the fixed hanger? One question - is it a road bike or mountain/gravel (rough terrain) bike?
– Mike
yesterday
Mike, exactly, like a fuse. It is a gravel bike with mounted MTB rear derailleur.
– greenoldman
12 hours ago
Thank you but just a clarification, I didn't mean a replacement as 1:1 change of parts, I meant using it as protection tool, in the same sense as the hanger was "detached" from the frame (creating replaceable hanger) to protect it.
– greenoldman
yesterday
Thank you but just a clarification, I didn't mean a replacement as 1:1 change of parts, I meant using it as protection tool, in the same sense as the hanger was "detached" from the frame (creating replaceable hanger) to protect it.
– greenoldman
yesterday
You mean like a circuit breaker (a fuse) in an electric circuit? Adding a weaker part so it breaks instead of the fixed hanger? One question - is it a road bike or mountain/gravel (rough terrain) bike?
– Mike
yesterday
You mean like a circuit breaker (a fuse) in an electric circuit? Adding a weaker part so it breaks instead of the fixed hanger? One question - is it a road bike or mountain/gravel (rough terrain) bike?
– Mike
yesterday
Mike, exactly, like a fuse. It is a gravel bike with mounted MTB rear derailleur.
– greenoldman
12 hours ago
Mike, exactly, like a fuse. It is a gravel bike with mounted MTB rear derailleur.
– greenoldman
12 hours ago
add a comment |
Thanks for contributing an answer to Bicycles Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f58432%2fcan-hanger-extender-be-used-as-replaceable-hanger%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
One option to protect the derailer is to install a derailer guard on the dropout.
– Daniel R Hicks
2 days ago
1
The derailer guard acts as a lever and actually helps to destroy the frame. This is why they haven't been common since the 90s.
– ojs
2 days ago
@DanielRHicks, misunderstanding -- I want to protect the frame, not the derailleur.
– greenoldman
yesterday