Can I share Wi-fi via the same Wi-fi adapter?
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ height:90px;width:728px;box-sizing:border-box;
}
I'm using a MacBook, and I would like to share my Wifi without letting others know my wifi password.
So I thought: is it possible to recieve a Wifi on the MacBook AND at the same time share my internet connection like it was a different hotspot?
I mean: in the Sharing panel of the settings, you can share your Ethernet connection over to your Wifi adapter, or you can share you Wifi connection to your ethernet adapter: is it possible to do a Wifi to Wifi sharing?
Wifi Network A → Mac → Network B → Users
networking mac wireless-networking
edited Jan 10 '13 at 11:54
slhck
164k47453477
asked Jan 10 '13 at 11:52
Matteo MontiMatteo Monti
10412
add a comment |
I'm using a MacBook, and I would like to share my Wifi without letting others know my wifi password.
So I thought: is it possible to recieve a Wifi on the MacBook AND at the same time share my internet connection like it was a different hotspot?
I mean: in the Sharing panel of the settings, you can share your Ethernet connection over to your Wifi adapter, or you can share you Wifi connection to your ethernet adapter: is it possible to do a Wifi to Wifi sharing?
Wifi Network A → Mac → Network B → Users
networking mac wireless-networking
edited Jan 10 '13 at 11:54
slhck
164k47453477
asked Jan 10 '13 at 11:52
Matteo MontiMatteo Monti
10412
Not possible on the same network interface due to design of WIFI itself. Possible to share network connection if you have an additional WIFI antenna - for example on USB. You could then share network from one interface to the other.
– mnmnc
Jan 10 '13 at 11:56
WIFI is a communication protocol that uses CSMA/CA - collision avoidance. Router in network 1 is receiving from one client at the time. If you would share your connection directly on the same interface - router from network one would not have an idea if someone is sending on the network two that you've created. If you share your connection to other antenna - you are creating a second wifi router on your computer and you are responsible for collision avoidance in the network two. Hope this is clear.
– mnmnc
Jan 10 '13 at 12:02
More in the topic here : tutorialspoint.com/wi-fi/wifi_access_protocols.htm
– mnmnc
Jan 10 '13 at 12:03
add a comment |
I'm using a MacBook, and I would like to share my Wifi without letting others know my wifi password.
So I thought: is it possible to recieve a Wifi on the MacBook AND at the same time share my internet connection like it was a different hotspot?
I mean: in the Sharing panel of the settings, you can share your Ethernet connection over to your Wifi adapter, or you can share you Wifi connection to your ethernet adapter: is it possible to do a Wifi to Wifi sharing?
Wifi Network A → Mac → Network B → Users
networking mac wireless-networking
edited Jan 10 '13 at 11:54
slhck
164k47453477
asked Jan 10 '13 at 11:52
Matteo MontiMatteo Monti
10412
I'm using a MacBook, and I would like to share my Wifi without letting others know my wifi password.
So I thought: is it possible to recieve a Wifi on the MacBook AND at the same time share my internet connection like it was a different hotspot?
I mean: in the Sharing panel of the settings, you can share your Ethernet connection over to your Wifi adapter, or you can share you Wifi connection to your ethernet adapter: is it possible to do a Wifi to Wifi sharing?
Wifi Network A → Mac → Network B → Users
networking mac wireless-networking
networking mac wireless-networking
edited Jan 10 '13 at 11:54
slhck
164k47453477
asked Jan 10 '13 at 11:52
Matteo MontiMatteo Monti
10412
edited Jan 10 '13 at 11:54
slhck
164k47453477
asked Jan 10 '13 at 11:52
Matteo MontiMatteo Monti
10412
edited Jan 10 '13 at 11:54
slhck
164k47453477
edited Jan 10 '13 at 11:54
slhck
164k47453477
edited Jan 10 '13 at 11:54
slhck
164k47453477
164k47453477
asked Jan 10 '13 at 11:52
Matteo MontiMatteo Monti
10412
asked Jan 10 '13 at 11:52
Matteo MontiMatteo Monti
10412
asked Jan 10 '13 at 11:52
Matteo MontiMatteo Monti
10412
10412
Not possible on the same network interface due to design of WIFI itself. Possible to share network connection if you have an additional WIFI antenna - for example on USB. You could then share network from one interface to the other.
– mnmnc
Jan 10 '13 at 11:56
WIFI is a communication protocol that uses CSMA/CA - collision avoidance. Router in network 1 is receiving from one client at the time. If you would share your connection directly on the same interface - router from network one would not have an idea if someone is sending on the network two that you've created. If you share your connection to other antenna - you are creating a second wifi router on your computer and you are responsible for collision avoidance in the network two. Hope this is clear.
– mnmnc
Jan 10 '13 at 12:02
More in the topic here : tutorialspoint.com/wi-fi/wifi_access_protocols.htm
– mnmnc
Jan 10 '13 at 12:03
add a comment |
Not possible on the same network interface due to design of WIFI itself. Possible to share network connection if you have an additional WIFI antenna - for example on USB. You could then share network from one interface to the other.
– mnmnc
Jan 10 '13 at 11:56
WIFI is a communication protocol that uses CSMA/CA - collision avoidance. Router in network 1 is receiving from one client at the time. If you would share your connection directly on the same interface - router from network one would not have an idea if someone is sending on the network two that you've created. If you share your connection to other antenna - you are creating a second wifi router on your computer and you are responsible for collision avoidance in the network two. Hope this is clear.
– mnmnc
Jan 10 '13 at 12:02
More in the topic here : tutorialspoint.com/wi-fi/wifi_access_protocols.htm
– mnmnc
Jan 10 '13 at 12:03
Not possible on the same network interface due to design of WIFI itself. Possible to share network connection if you have an additional WIFI antenna - for example on USB. You could then share network from one interface to the other.
– mnmnc
Jan 10 '13 at 11:56
Not possible on the same network interface due to design of WIFI itself. Possible to share network connection if you have an additional WIFI antenna - for example on USB. You could then share network from one interface to the other.
– mnmnc
Jan 10 '13 at 11:56
WIFI is a communication protocol that uses CSMA/CA - collision avoidance. Router in network 1 is receiving from one client at the time. If you would share your connection directly on the same interface - router from network one would not have an idea if someone is sending on the network two that you've created. If you share your connection to other antenna - you are creating a second wifi router on your computer and you are responsible for collision avoidance in the network two. Hope this is clear.
– mnmnc
Jan 10 '13 at 12:02
WIFI is a communication protocol that uses CSMA/CA - collision avoidance. Router in network 1 is receiving from one client at the time. If you would share your connection directly on the same interface - router from network one would not have an idea if someone is sending on the network two that you've created. If you share your connection to other antenna - you are creating a second wifi router on your computer and you are responsible for collision avoidance in the network two. Hope this is clear.
– mnmnc
Jan 10 '13 at 12:02
More in the topic here : tutorialspoint.com/wi-fi/wifi_access_protocols.htm
– mnmnc
Jan 10 '13 at 12:03
More in the topic here : tutorialspoint.com/wi-fi/wifi_access_protocols.htm
– mnmnc
Jan 10 '13 at 12:03
add a comment |
2 Answers
2
active
oldest
votes
To put it in a short way: No, it's not possible.
Your Mac only allows you to share a connection through a connection that isn't used yet. Your Wi-Fi adapter cannot connect to and create a network at the same time. For example, if you're connected via Wi-Fi, you can only share that connection to other devices using your Ethernet port, and vice-versa.
A possibility would be to buy a wireless access point (or wireless router) and connect its LAN port to your Mac's Ethernet port. Then you connect to the WiFi with the MacBook and share that connection through Ethernet to the wireless access point. You can then configure the access point to create a different network than the one you originally connected to.
Or buy a USB wireless adapter, which you use to connect to the existing Wi-Fi network. Then, share this network through your internal Wi-Fi adapter.
Alternatively it might be easier to just replace the current Wi-Fi router/access point you're connecting to with one that offers a guest network, i.e. one that doesn't require a password to connect to. These are dual-band routers, since they allow you to create two networks. Read more here: Run Your Home Network Like a Coffee Shop for Easier Guest Access and Family-Friendly Browsing
answered Jan 10 '13 at 12:10
slhckslhck
164k47453477
I'm pretty sure it could be done with USB wifi antenna to create a hotspot directly on the computer and share the other wifi connection with the USB one. There is no problem with sharing the internet connection between two NIC (network cards) and the USB wifi would be visible exactly like the second network card. 100% possible on PC - i have no reason to belive there is a limitation for such solution on MAC.
– mnmnc
Jan 10 '13 at 12:17
True, there are enough USB network adapters that work on Macs.
– slhck
Jan 10 '13 at 12:20
add a comment |
Actually it IS possible. Connectify allows to use the same Wifi adapter to simultaneously receive and broadcast through an AP.
Still, this is a PC/Windows software, not a Mac software. Probably there are other software out there that works on OSX.
answered Jan 10 '13 at 16:06
Lorenzo Von MatterhornLorenzo Von Matterhorn
2,06911518
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f531949%2fcan-i-share-wi-fi-via-the-same-wi-fi-adapter%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
To put it in a short way: No, it's not possible.
Your Mac only allows you to share a connection through a connection that isn't used yet. Your Wi-Fi adapter cannot connect to and create a network at the same time. For example, if you're connected via Wi-Fi, you can only share that connection to other devices using your Ethernet port, and vice-versa.
A possibility would be to buy a wireless access point (or wireless router) and connect its LAN port to your Mac's Ethernet port. Then you connect to the WiFi with the MacBook and share that connection through Ethernet to the wireless access point. You can then configure the access point to create a different network than the one you originally connected to.
Or buy a USB wireless adapter, which you use to connect to the existing Wi-Fi network. Then, share this network through your internal Wi-Fi adapter.
Alternatively it might be easier to just replace the current Wi-Fi router/access point you're connecting to with one that offers a guest network, i.e. one that doesn't require a password to connect to. These are dual-band routers, since they allow you to create two networks. Read more here: Run Your Home Network Like a Coffee Shop for Easier Guest Access and Family-Friendly Browsing
answered Jan 10 '13 at 12:10
slhckslhck
164k47453477
I'm pretty sure it could be done with USB wifi antenna to create a hotspot directly on the computer and share the other wifi connection with the USB one. There is no problem with sharing the internet connection between two NIC (network cards) and the USB wifi would be visible exactly like the second network card. 100% possible on PC - i have no reason to belive there is a limitation for such solution on MAC.
– mnmnc
Jan 10 '13 at 12:17
True, there are enough USB network adapters that work on Macs.
– slhck
Jan 10 '13 at 12:20
add a comment |
To put it in a short way: No, it's not possible.
Your Mac only allows you to share a connection through a connection that isn't used yet. Your Wi-Fi adapter cannot connect to and create a network at the same time. For example, if you're connected via Wi-Fi, you can only share that connection to other devices using your Ethernet port, and vice-versa.
A possibility would be to buy a wireless access point (or wireless router) and connect its LAN port to your Mac's Ethernet port. Then you connect to the WiFi with the MacBook and share that connection through Ethernet to the wireless access point. You can then configure the access point to create a different network than the one you originally connected to.
Or buy a USB wireless adapter, which you use to connect to the existing Wi-Fi network. Then, share this network through your internal Wi-Fi adapter.
Alternatively it might be easier to just replace the current Wi-Fi router/access point you're connecting to with one that offers a guest network, i.e. one that doesn't require a password to connect to. These are dual-band routers, since they allow you to create two networks. Read more here: Run Your Home Network Like a Coffee Shop for Easier Guest Access and Family-Friendly Browsing
answered Jan 10 '13 at 12:10
slhckslhck
164k47453477
I'm pretty sure it could be done with USB wifi antenna to create a hotspot directly on the computer and share the other wifi connection with the USB one. There is no problem with sharing the internet connection between two NIC (network cards) and the USB wifi would be visible exactly like the second network card. 100% possible on PC - i have no reason to belive there is a limitation for such solution on MAC.
– mnmnc
Jan 10 '13 at 12:17
True, there are enough USB network adapters that work on Macs.
– slhck
Jan 10 '13 at 12:20
add a comment |
To put it in a short way: No, it's not possible.
Your Mac only allows you to share a connection through a connection that isn't used yet. Your Wi-Fi adapter cannot connect to and create a network at the same time. For example, if you're connected via Wi-Fi, you can only share that connection to other devices using your Ethernet port, and vice-versa.
A possibility would be to buy a wireless access point (or wireless router) and connect its LAN port to your Mac's Ethernet port. Then you connect to the WiFi with the MacBook and share that connection through Ethernet to the wireless access point. You can then configure the access point to create a different network than the one you originally connected to.
Or buy a USB wireless adapter, which you use to connect to the existing Wi-Fi network. Then, share this network through your internal Wi-Fi adapter.
Alternatively it might be easier to just replace the current Wi-Fi router/access point you're connecting to with one that offers a guest network, i.e. one that doesn't require a password to connect to. These are dual-band routers, since they allow you to create two networks. Read more here: Run Your Home Network Like a Coffee Shop for Easier Guest Access and Family-Friendly Browsing
answered Jan 10 '13 at 12:10
slhckslhck
164k47453477
To put it in a short way: No, it's not possible.
Your Mac only allows you to share a connection through a connection that isn't used yet. Your Wi-Fi adapter cannot connect to and create a network at the same time. For example, if you're connected via Wi-Fi, you can only share that connection to other devices using your Ethernet port, and vice-versa.
A possibility would be to buy a wireless access point (or wireless router) and connect its LAN port to your Mac's Ethernet port. Then you connect to the WiFi with the MacBook and share that connection through Ethernet to the wireless access point. You can then configure the access point to create a different network than the one you originally connected to.
Or buy a USB wireless adapter, which you use to connect to the existing Wi-Fi network. Then, share this network through your internal Wi-Fi adapter.
Alternatively it might be easier to just replace the current Wi-Fi router/access point you're connecting to with one that offers a guest network, i.e. one that doesn't require a password to connect to. These are dual-band routers, since they allow you to create two networks. Read more here: Run Your Home Network Like a Coffee Shop for Easier Guest Access and Family-Friendly Browsing
answered Jan 10 '13 at 12:10
slhckslhck
164k47453477
edited Jan 10 '13 at 12:15
answered Jan 10 '13 at 12:10
slhckslhck
164k47453477
answered Jan 10 '13 at 12:10
slhckslhck
164k47453477
answered Jan 10 '13 at 12:10
slhckslhck
164k47453477
164k47453477
I'm pretty sure it could be done with USB wifi antenna to create a hotspot directly on the computer and share the other wifi connection with the USB one. There is no problem with sharing the internet connection between two NIC (network cards) and the USB wifi would be visible exactly like the second network card. 100% possible on PC - i have no reason to belive there is a limitation for such solution on MAC.
– mnmnc
Jan 10 '13 at 12:17
True, there are enough USB network adapters that work on Macs.
– slhck
Jan 10 '13 at 12:20
add a comment |
I'm pretty sure it could be done with USB wifi antenna to create a hotspot directly on the computer and share the other wifi connection with the USB one. There is no problem with sharing the internet connection between two NIC (network cards) and the USB wifi would be visible exactly like the second network card. 100% possible on PC - i have no reason to belive there is a limitation for such solution on MAC.
– mnmnc
Jan 10 '13 at 12:17
True, there are enough USB network adapters that work on Macs.
– slhck
Jan 10 '13 at 12:20
I'm pretty sure it could be done with USB wifi antenna to create a hotspot directly on the computer and share the other wifi connection with the USB one. There is no problem with sharing the internet connection between two NIC (network cards) and the USB wifi would be visible exactly like the second network card. 100% possible on PC - i have no reason to belive there is a limitation for such solution on MAC.
– mnmnc
Jan 10 '13 at 12:17
I'm pretty sure it could be done with USB wifi antenna to create a hotspot directly on the computer and share the other wifi connection with the USB one. There is no problem with sharing the internet connection between two NIC (network cards) and the USB wifi would be visible exactly like the second network card. 100% possible on PC - i have no reason to belive there is a limitation for such solution on MAC.
– mnmnc
Jan 10 '13 at 12:17
True, there are enough USB network adapters that work on Macs.
– slhck
Jan 10 '13 at 12:20
True, there are enough USB network adapters that work on Macs.
– slhck
Jan 10 '13 at 12:20
add a comment |
Actually it IS possible. Connectify allows to use the same Wifi adapter to simultaneously receive and broadcast through an AP.
Still, this is a PC/Windows software, not a Mac software. Probably there are other software out there that works on OSX.
answered Jan 10 '13 at 16:06
Lorenzo Von MatterhornLorenzo Von Matterhorn
2,06911518
add a comment |
Actually it IS possible. Connectify allows to use the same Wifi adapter to simultaneously receive and broadcast through an AP.
Still, this is a PC/Windows software, not a Mac software. Probably there are other software out there that works on OSX.
answered Jan 10 '13 at 16:06
Lorenzo Von MatterhornLorenzo Von Matterhorn
2,06911518
add a comment |
Actually it IS possible. Connectify allows to use the same Wifi adapter to simultaneously receive and broadcast through an AP.
Still, this is a PC/Windows software, not a Mac software. Probably there are other software out there that works on OSX.
answered Jan 10 '13 at 16:06
Lorenzo Von MatterhornLorenzo Von Matterhorn
2,06911518
Actually it IS possible. Connectify allows to use the same Wifi adapter to simultaneously receive and broadcast through an AP.
Still, this is a PC/Windows software, not a Mac software. Probably there are other software out there that works on OSX.
answered Jan 10 '13 at 16:06
Lorenzo Von MatterhornLorenzo Von Matterhorn
2,06911518
answered Jan 10 '13 at 16:06
Lorenzo Von MatterhornLorenzo Von Matterhorn
2,06911518
answered Jan 10 '13 at 16:06
Lorenzo Von MatterhornLorenzo Von Matterhorn
2,06911518
answered Jan 10 '13 at 16:06
Lorenzo Von MatterhornLorenzo Von Matterhorn
2,06911518
2,06911518
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f531949%2fcan-i-share-wi-fi-via-the-same-wi-fi-adapter%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Not possible on the same network interface due to design of WIFI itself. Possible to share network connection if you have an additional WIFI antenna - for example on USB. You could then share network from one interface to the other.
– mnmnc
Jan 10 '13 at 11:56
WIFI is a communication protocol that uses CSMA/CA - collision avoidance. Router in network 1 is receiving from one client at the time. If you would share your connection directly on the same interface - router from network one would not have an idea if someone is sending on the network two that you've created. If you share your connection to other antenna - you are creating a second wifi router on your computer and you are responsible for collision avoidance in the network two. Hope this is clear.
– mnmnc
Jan 10 '13 at 12:02
More in the topic here : tutorialspoint.com/wi-fi/wifi_access_protocols.htm
– mnmnc
Jan 10 '13 at 12:03