Wifi range extender with Raspberry Pi and Rasbmc
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ height:90px;width:728px;box-sizing:border-box;
}
What I want to achieve is to extend the range of my Wifi to another room. I've got a router, a Raspberry pi connected to this router through a UTP cable and i've got a Wifi USB stick in the RPi.
What I would like to achieve is to be able to connect to the Wifi and have internet access in either room and also be able to connect to the RPi as well (I.E. ssh or webserver).
I've been following some setups and I've almost achieved what I want to do. I can connect to the wireless and have internet access, however I'm unable to access my RPi. The RPi itself also does not have a internet connection. How can I fix this issue?
What I'm executing to get a bridged internet connection is:
brctl addbr br0
brctl addif br0 eth0 wlan0
ip link set up dev br0
brctl addif br0 wlan0
hostapd /etc/hostapd/hostapd.conf
The file hostapd.conf contains:
interface=wlan0
driver=rtl871xdrv
bridge=br0
ssid=Test
channel=1
wpa=1
wpa_passphrase=Secret
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
auth_algs=1
macaddr_acl=0
Network Manager is running with the following settings:
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=true
[keyfile]
unmanaged-devices=mac:c4:6e:1f:20:9d:91
Sources I've followed:
- Source 1
- Source 2
linux networking wireless-networking bridge raspbmc
asked Dec 8 '14 at 8:15
JaapJaap
613
add a comment |
What I want to achieve is to extend the range of my Wifi to another room. I've got a router, a Raspberry pi connected to this router through a UTP cable and i've got a Wifi USB stick in the RPi.
What I would like to achieve is to be able to connect to the Wifi and have internet access in either room and also be able to connect to the RPi as well (I.E. ssh or webserver).
I've been following some setups and I've almost achieved what I want to do. I can connect to the wireless and have internet access, however I'm unable to access my RPi. The RPi itself also does not have a internet connection. How can I fix this issue?
What I'm executing to get a bridged internet connection is:
brctl addbr br0
brctl addif br0 eth0 wlan0
ip link set up dev br0
brctl addif br0 wlan0
hostapd /etc/hostapd/hostapd.conf
The file hostapd.conf contains:
interface=wlan0
driver=rtl871xdrv
bridge=br0
ssid=Test
channel=1
wpa=1
wpa_passphrase=Secret
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
auth_algs=1
macaddr_acl=0
Network Manager is running with the following settings:
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=true
[keyfile]
unmanaged-devices=mac:c4:6e:1f:20:9d:91
Sources I've followed:
- Source 1
- Source 2
linux networking wireless-networking bridge raspbmc
asked Dec 8 '14 at 8:15
JaapJaap
613
add a comment |
What I want to achieve is to extend the range of my Wifi to another room. I've got a router, a Raspberry pi connected to this router through a UTP cable and i've got a Wifi USB stick in the RPi.
What I would like to achieve is to be able to connect to the Wifi and have internet access in either room and also be able to connect to the RPi as well (I.E. ssh or webserver).
I've been following some setups and I've almost achieved what I want to do. I can connect to the wireless and have internet access, however I'm unable to access my RPi. The RPi itself also does not have a internet connection. How can I fix this issue?
What I'm executing to get a bridged internet connection is:
brctl addbr br0
brctl addif br0 eth0 wlan0
ip link set up dev br0
brctl addif br0 wlan0
hostapd /etc/hostapd/hostapd.conf
The file hostapd.conf contains:
interface=wlan0
driver=rtl871xdrv
bridge=br0
ssid=Test
channel=1
wpa=1
wpa_passphrase=Secret
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
auth_algs=1
macaddr_acl=0
Network Manager is running with the following settings:
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=true
[keyfile]
unmanaged-devices=mac:c4:6e:1f:20:9d:91
Sources I've followed:
- Source 1
- Source 2
linux networking wireless-networking bridge raspbmc
asked Dec 8 '14 at 8:15
JaapJaap
613
What I want to achieve is to extend the range of my Wifi to another room. I've got a router, a Raspberry pi connected to this router through a UTP cable and i've got a Wifi USB stick in the RPi.
What I would like to achieve is to be able to connect to the Wifi and have internet access in either room and also be able to connect to the RPi as well (I.E. ssh or webserver).
I've been following some setups and I've almost achieved what I want to do. I can connect to the wireless and have internet access, however I'm unable to access my RPi. The RPi itself also does not have a internet connection. How can I fix this issue?
What I'm executing to get a bridged internet connection is:
brctl addbr br0
brctl addif br0 eth0 wlan0
ip link set up dev br0
brctl addif br0 wlan0
hostapd /etc/hostapd/hostapd.conf
The file hostapd.conf contains:
interface=wlan0
driver=rtl871xdrv
bridge=br0
ssid=Test
channel=1
wpa=1
wpa_passphrase=Secret
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
auth_algs=1
macaddr_acl=0
Network Manager is running with the following settings:
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=true
[keyfile]
unmanaged-devices=mac:c4:6e:1f:20:9d:91
Sources I've followed:
- Source 1
- Source 2
linux networking wireless-networking bridge raspbmc
linux networking wireless-networking bridge raspbmc
asked Dec 8 '14 at 8:15
JaapJaap
613
asked Dec 8 '14 at 8:15
JaapJaap
613
asked Dec 8 '14 at 8:15
JaapJaap
613
asked Dec 8 '14 at 8:15
JaapJaap
613
asked Dec 8 '14 at 8:15
JaapJaap
613
613
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
So after doing more research I found a solution. I've changed the NetworkManager configuration to block the ethernet connection as well.
[keyfile]
unmanaged-devices=mac:c4:6e:1f:20:9d:91;mac:ot:hr:ma:ca:dd:rs
I've added the following to my sequence of commands.
ifconfig eth0 0.0.0.0
dhclient br0
I'm not sure why this works, but it does for me. The solution is similar to the answer to this question.
edited Mar 20 '17 at 10:17
Community♦
1
answered Dec 8 '14 at 13:16
JaapJaap
613
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f849860%2fwifi-range-extender-with-raspberry-pi-and-rasbmc%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
So after doing more research I found a solution. I've changed the NetworkManager configuration to block the ethernet connection as well.
[keyfile]
unmanaged-devices=mac:c4:6e:1f:20:9d:91;mac:ot:hr:ma:ca:dd:rs
I've added the following to my sequence of commands.
ifconfig eth0 0.0.0.0
dhclient br0
I'm not sure why this works, but it does for me. The solution is similar to the answer to this question.
edited Mar 20 '17 at 10:17
Community♦
1
answered Dec 8 '14 at 13:16
JaapJaap
613
add a comment |
So after doing more research I found a solution. I've changed the NetworkManager configuration to block the ethernet connection as well.
[keyfile]
unmanaged-devices=mac:c4:6e:1f:20:9d:91;mac:ot:hr:ma:ca:dd:rs
I've added the following to my sequence of commands.
ifconfig eth0 0.0.0.0
dhclient br0
I'm not sure why this works, but it does for me. The solution is similar to the answer to this question.
edited Mar 20 '17 at 10:17
Community♦
1
answered Dec 8 '14 at 13:16
JaapJaap
613
add a comment |
So after doing more research I found a solution. I've changed the NetworkManager configuration to block the ethernet connection as well.
[keyfile]
unmanaged-devices=mac:c4:6e:1f:20:9d:91;mac:ot:hr:ma:ca:dd:rs
I've added the following to my sequence of commands.
ifconfig eth0 0.0.0.0
dhclient br0
I'm not sure why this works, but it does for me. The solution is similar to the answer to this question.
edited Mar 20 '17 at 10:17
Community♦
1
answered Dec 8 '14 at 13:16
JaapJaap
613
So after doing more research I found a solution. I've changed the NetworkManager configuration to block the ethernet connection as well.
[keyfile]
unmanaged-devices=mac:c4:6e:1f:20:9d:91;mac:ot:hr:ma:ca:dd:rs
I've added the following to my sequence of commands.
ifconfig eth0 0.0.0.0
dhclient br0
I'm not sure why this works, but it does for me. The solution is similar to the answer to this question.
edited Mar 20 '17 at 10:17
Community♦
1
answered Dec 8 '14 at 13:16
JaapJaap
613
edited Mar 20 '17 at 10:17
Community♦
1
edited Mar 20 '17 at 10:17
Community♦
1
edited Mar 20 '17 at 10:17
Community♦
1
1
answered Dec 8 '14 at 13:16
JaapJaap
613
answered Dec 8 '14 at 13:16
JaapJaap
613
answered Dec 8 '14 at 13:16
JaapJaap
613
613
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f849860%2fwifi-range-extender-with-raspberry-pi-and-rasbmc%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
