Will Windows renew IP address sometime after “ipconfig /release”?
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ height:90px;width:728px;box-sizing:border-box;
}
On a Windows 2000 PC, I did a "ipconfig /release" to disconnect it from the network. After about 6 hours, I checked it again and it was still disconnected. But then about 17 hours after that, I checked it again and it had renewed the IP address and was back on the network. I never did a "ipconfig /renew", so is Windows supposed to renew the IP address automatically some time after a "ipconfig /release"?
Or could there be some malware on this computer that detected it was off the network and renewed the IP address? (My ISP emailed me saying it detected malware on one of our computers so I am trying to figure out which computer it is.)
windows dhcp ip-address
asked Jul 22 '14 at 6:51
pacoverflowpacoverflow
71531636
add a comment |
On a Windows 2000 PC, I did a "ipconfig /release" to disconnect it from the network. After about 6 hours, I checked it again and it was still disconnected. But then about 17 hours after that, I checked it again and it had renewed the IP address and was back on the network. I never did a "ipconfig /renew", so is Windows supposed to renew the IP address automatically some time after a "ipconfig /release"?
Or could there be some malware on this computer that detected it was off the network and renewed the IP address? (My ISP emailed me saying it detected malware on one of our computers so I am trying to figure out which computer it is.)
windows dhcp ip-address
asked Jul 22 '14 at 6:51
pacoverflowpacoverflow
71531636
1
Had you woken/restarted the computer during the 17hrs? Either would possibly prompt Windows to wake the NIC and renew an IP...
– Kinnectus
Jul 22 '14 at 7:00
@BigChris This computer doesn't go into sleep mode, and it was powered on the entire 17 hours. Windows is also configured to not put the NIC into any power saving mode.
– pacoverflow
Jul 22 '14 at 7:05
add a comment |
On a Windows 2000 PC, I did a "ipconfig /release" to disconnect it from the network. After about 6 hours, I checked it again and it was still disconnected. But then about 17 hours after that, I checked it again and it had renewed the IP address and was back on the network. I never did a "ipconfig /renew", so is Windows supposed to renew the IP address automatically some time after a "ipconfig /release"?
Or could there be some malware on this computer that detected it was off the network and renewed the IP address? (My ISP emailed me saying it detected malware on one of our computers so I am trying to figure out which computer it is.)
windows dhcp ip-address
asked Jul 22 '14 at 6:51
pacoverflowpacoverflow
71531636
On a Windows 2000 PC, I did a "ipconfig /release" to disconnect it from the network. After about 6 hours, I checked it again and it was still disconnected. But then about 17 hours after that, I checked it again and it had renewed the IP address and was back on the network. I never did a "ipconfig /renew", so is Windows supposed to renew the IP address automatically some time after a "ipconfig /release"?
Or could there be some malware on this computer that detected it was off the network and renewed the IP address? (My ISP emailed me saying it detected malware on one of our computers so I am trying to figure out which computer it is.)
windows dhcp ip-address
windows dhcp ip-address
asked Jul 22 '14 at 6:51
pacoverflowpacoverflow
71531636
asked Jul 22 '14 at 6:51
pacoverflowpacoverflow
71531636
edited Jul 22 '14 at 7:11
pacoverflow
asked Jul 22 '14 at 6:51
pacoverflowpacoverflow
71531636
asked Jul 22 '14 at 6:51
pacoverflowpacoverflow
71531636
asked Jul 22 '14 at 6:51
pacoverflowpacoverflow
71531636
71531636
1
Had you woken/restarted the computer during the 17hrs? Either would possibly prompt Windows to wake the NIC and renew an IP...
– Kinnectus
Jul 22 '14 at 7:00
@BigChris This computer doesn't go into sleep mode, and it was powered on the entire 17 hours. Windows is also configured to not put the NIC into any power saving mode.
– pacoverflow
Jul 22 '14 at 7:05
add a comment |
1
Had you woken/restarted the computer during the 17hrs? Either would possibly prompt Windows to wake the NIC and renew an IP...
– Kinnectus
Jul 22 '14 at 7:00
@BigChris This computer doesn't go into sleep mode, and it was powered on the entire 17 hours. Windows is also configured to not put the NIC into any power saving mode.
– pacoverflow
Jul 22 '14 at 7:05
1
1
Had you woken/restarted the computer during the 17hrs? Either would possibly prompt Windows to wake the NIC and renew an IP...
– Kinnectus
Jul 22 '14 at 7:00
Had you woken/restarted the computer during the 17hrs? Either would possibly prompt Windows to wake the NIC and renew an IP...
– Kinnectus
Jul 22 '14 at 7:00
@BigChris This computer doesn't go into sleep mode, and it was powered on the entire 17 hours. Windows is also configured to not put the NIC into any power saving mode.
– pacoverflow
Jul 22 '14 at 7:05
@BigChris This computer doesn't go into sleep mode, and it was powered on the entire 17 hours. Windows is also configured to not put the NIC into any power saving mode.
– pacoverflow
Jul 22 '14 at 7:05
add a comment |
2 Answers
2
active
oldest
votes
Firstly, if you are trying to figure out which computer is infected with the malware, then you are on the wrong path. You should use special tools for that or monitor your processes, rather then guessing if PC reconnected to the network.
Answering your original question - PC is not supposed to be automatically renewing IP config after it has been released. However if you are using WiFi and you lost connection for a short period of time (which happens now and then) it might do the whole reconnect process which will include release, renew and flushdns.
answered Jul 22 '14 at 7:35
Art GertnerArt Gertner
5,958113663
Yes I am running malware scanners on all computers. But I was curious if Windows was supposed to automatically renew the IP or not. This computer is directly connected to the router via ethernet, so I wonder why it reconnected.
– pacoverflow
Jul 22 '14 at 7:44
add a comment |
Could be anything, because we can't guarantee there was no interference in the state of the machine between the computer executing your command and you coming back to check if it has an ip.
To answer your question, ipconfig /release does not have an option to change the timer, create a timer or remove the timer. A timer is not even mentioned in the documentation for ipconfig /release
Ipconfig doesn't do much except manipulate your tcp/ip stack and display your tcp/ip configuration. Its meant for troubleshooting and has many useful functions that do exactly and only what they say.
answered Jan 31 at 19:41
Caine KiewitCaine Kiewit
747
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f786221%2fwill-windows-renew-ip-address-sometime-after-ipconfig-release%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Firstly, if you are trying to figure out which computer is infected with the malware, then you are on the wrong path. You should use special tools for that or monitor your processes, rather then guessing if PC reconnected to the network.
Answering your original question - PC is not supposed to be automatically renewing IP config after it has been released. However if you are using WiFi and you lost connection for a short period of time (which happens now and then) it might do the whole reconnect process which will include release, renew and flushdns.
answered Jul 22 '14 at 7:35
Art GertnerArt Gertner
5,958113663
Yes I am running malware scanners on all computers. But I was curious if Windows was supposed to automatically renew the IP or not. This computer is directly connected to the router via ethernet, so I wonder why it reconnected.
– pacoverflow
Jul 22 '14 at 7:44
add a comment |
Firstly, if you are trying to figure out which computer is infected with the malware, then you are on the wrong path. You should use special tools for that or monitor your processes, rather then guessing if PC reconnected to the network.
Answering your original question - PC is not supposed to be automatically renewing IP config after it has been released. However if you are using WiFi and you lost connection for a short period of time (which happens now and then) it might do the whole reconnect process which will include release, renew and flushdns.
answered Jul 22 '14 at 7:35
Art GertnerArt Gertner
5,958113663
Yes I am running malware scanners on all computers. But I was curious if Windows was supposed to automatically renew the IP or not. This computer is directly connected to the router via ethernet, so I wonder why it reconnected.
– pacoverflow
Jul 22 '14 at 7:44
add a comment |
Firstly, if you are trying to figure out which computer is infected with the malware, then you are on the wrong path. You should use special tools for that or monitor your processes, rather then guessing if PC reconnected to the network.
Answering your original question - PC is not supposed to be automatically renewing IP config after it has been released. However if you are using WiFi and you lost connection for a short period of time (which happens now and then) it might do the whole reconnect process which will include release, renew and flushdns.
answered Jul 22 '14 at 7:35
Art GertnerArt Gertner
5,958113663
Firstly, if you are trying to figure out which computer is infected with the malware, then you are on the wrong path. You should use special tools for that or monitor your processes, rather then guessing if PC reconnected to the network.
Answering your original question - PC is not supposed to be automatically renewing IP config after it has been released. However if you are using WiFi and you lost connection for a short period of time (which happens now and then) it might do the whole reconnect process which will include release, renew and flushdns.
answered Jul 22 '14 at 7:35
Art GertnerArt Gertner
5,958113663
answered Jul 22 '14 at 7:35
Art GertnerArt Gertner
5,958113663
answered Jul 22 '14 at 7:35
Art GertnerArt Gertner
5,958113663
answered Jul 22 '14 at 7:35
Art GertnerArt Gertner
5,958113663
5,958113663
Yes I am running malware scanners on all computers. But I was curious if Windows was supposed to automatically renew the IP or not. This computer is directly connected to the router via ethernet, so I wonder why it reconnected.
– pacoverflow
Jul 22 '14 at 7:44
add a comment |
Yes I am running malware scanners on all computers. But I was curious if Windows was supposed to automatically renew the IP or not. This computer is directly connected to the router via ethernet, so I wonder why it reconnected.
– pacoverflow
Jul 22 '14 at 7:44
Yes I am running malware scanners on all computers. But I was curious if Windows was supposed to automatically renew the IP or not. This computer is directly connected to the router via ethernet, so I wonder why it reconnected.
– pacoverflow
Jul 22 '14 at 7:44
Yes I am running malware scanners on all computers. But I was curious if Windows was supposed to automatically renew the IP or not. This computer is directly connected to the router via ethernet, so I wonder why it reconnected.
– pacoverflow
Jul 22 '14 at 7:44
add a comment |
Could be anything, because we can't guarantee there was no interference in the state of the machine between the computer executing your command and you coming back to check if it has an ip.
To answer your question, ipconfig /release does not have an option to change the timer, create a timer or remove the timer. A timer is not even mentioned in the documentation for ipconfig /release
Ipconfig doesn't do much except manipulate your tcp/ip stack and display your tcp/ip configuration. Its meant for troubleshooting and has many useful functions that do exactly and only what they say.
answered Jan 31 at 19:41
Caine KiewitCaine Kiewit
747
add a comment |
Could be anything, because we can't guarantee there was no interference in the state of the machine between the computer executing your command and you coming back to check if it has an ip.
To answer your question, ipconfig /release does not have an option to change the timer, create a timer or remove the timer. A timer is not even mentioned in the documentation for ipconfig /release
Ipconfig doesn't do much except manipulate your tcp/ip stack and display your tcp/ip configuration. Its meant for troubleshooting and has many useful functions that do exactly and only what they say.
answered Jan 31 at 19:41
Caine KiewitCaine Kiewit
747
add a comment |
Could be anything, because we can't guarantee there was no interference in the state of the machine between the computer executing your command and you coming back to check if it has an ip.
To answer your question, ipconfig /release does not have an option to change the timer, create a timer or remove the timer. A timer is not even mentioned in the documentation for ipconfig /release
Ipconfig doesn't do much except manipulate your tcp/ip stack and display your tcp/ip configuration. Its meant for troubleshooting and has many useful functions that do exactly and only what they say.
answered Jan 31 at 19:41
Caine KiewitCaine Kiewit
747
Could be anything, because we can't guarantee there was no interference in the state of the machine between the computer executing your command and you coming back to check if it has an ip.
To answer your question, ipconfig /release does not have an option to change the timer, create a timer or remove the timer. A timer is not even mentioned in the documentation for ipconfig /release
Ipconfig doesn't do much except manipulate your tcp/ip stack and display your tcp/ip configuration. Its meant for troubleshooting and has many useful functions that do exactly and only what they say.
answered Jan 31 at 19:41
Caine KiewitCaine Kiewit
747
answered Jan 31 at 19:41
Caine KiewitCaine Kiewit
747
answered Jan 31 at 19:41
Caine KiewitCaine Kiewit
747
answered Jan 31 at 19:41
Caine KiewitCaine Kiewit
747
747
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f786221%2fwill-windows-renew-ip-address-sometime-after-ipconfig-release%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
Had you woken/restarted the computer during the 17hrs? Either would possibly prompt Windows to wake the NIC and renew an IP...
– Kinnectus
Jul 22 '14 at 7:00
@BigChris This computer doesn't go into sleep mode, and it was powered on the entire 17 hours. Windows is also configured to not put the NIC into any power saving mode.
– pacoverflow
Jul 22 '14 at 7:05