Is ASMedia ASM1061 SATA3 Controller supported under Linux ?
Is ASMedia ASM1061 supported under Linux ?
I have an AsRock 880GMH/U3S3 motherboard but i can’t get the SATA3 controller to work.
There are some spare info around google about it, but nothing that fully confirms the support, the official drivers don't support linux either.
Anyone managed to make this work ?
linux
asked Nov 30 '11 at 20:14
Debrian
142118
add a comment |
Is ASMedia ASM1061 supported under Linux ?
I have an AsRock 880GMH/U3S3 motherboard but i can’t get the SATA3 controller to work.
There are some spare info around google about it, but nothing that fully confirms the support, the official drivers don't support linux either.
Anyone managed to make this work ?
linux
asked Nov 30 '11 at 20:14
Debrian
142118
After some trial and error i managed to make it work. First of all i upgraded my kernel to the debian backports version (2.6.39-bpo.2-amd64), then i had set the mode of the controller to ahci and afterwords it was detected at boot time. I hope it's stable and has no problems.
– Debrian
Nov 30 '11 at 21:33
add a comment |
Is ASMedia ASM1061 supported under Linux ?
I have an AsRock 880GMH/U3S3 motherboard but i can’t get the SATA3 controller to work.
There are some spare info around google about it, but nothing that fully confirms the support, the official drivers don't support linux either.
Anyone managed to make this work ?
linux
asked Nov 30 '11 at 20:14
Debrian
142118
Is ASMedia ASM1061 supported under Linux ?
I have an AsRock 880GMH/U3S3 motherboard but i can’t get the SATA3 controller to work.
There are some spare info around google about it, but nothing that fully confirms the support, the official drivers don't support linux either.
Anyone managed to make this work ?
linux
linux
asked Nov 30 '11 at 20:14
Debrian
142118
asked Nov 30 '11 at 20:14
Debrian
142118
asked Nov 30 '11 at 20:14
Debrian
142118
asked Nov 30 '11 at 20:14
Debrian
142118
asked Nov 30 '11 at 20:14
Debrian
142118
142118
After some trial and error i managed to make it work. First of all i upgraded my kernel to the debian backports version (2.6.39-bpo.2-amd64), then i had set the mode of the controller to ahci and afterwords it was detected at boot time. I hope it's stable and has no problems.
– Debrian
Nov 30 '11 at 21:33
add a comment |
After some trial and error i managed to make it work. First of all i upgraded my kernel to the debian backports version (2.6.39-bpo.2-amd64), then i had set the mode of the controller to ahci and afterwords it was detected at boot time. I hope it's stable and has no problems.
– Debrian
Nov 30 '11 at 21:33
After some trial and error i managed to make it work. First of all i upgraded my kernel to the debian backports version (2.6.39-bpo.2-amd64), then i had set the mode of the controller to ahci and afterwords it was detected at boot time. I hope it's stable and has no problems.
– Debrian
Nov 30 '11 at 21:33
After some trial and error i managed to make it work. First of all i upgraded my kernel to the debian backports version (2.6.39-bpo.2-amd64), then i had set the mode of the controller to ahci and afterwords it was detected at boot time. I hope it's stable and has no problems.
– Debrian
Nov 30 '11 at 21:33
add a comment |
3 Answers
3
active
oldest
votes
After some trial and error, I managed to make it work. First of all, I upgraded my kernel to the Debian backports version (2.6.39-bpo.2-amd64), then I had set the mode of the controller to AHCI and afterwards, it was detected at boot time. I hope it's stable and has no problems.
After a few days I can confirm that it's stable and that I had no issues with it. Transfer speed seems fine.
edited Dec 19 '11 at 16:18
jonsca
2,952112539
answered Dec 9 '11 at 7:31
Debrian
142118
Setting the controller mode (in 2 places) to AHCI worked for Linux Mint 12 as well. Thank you!
– user78632
Jan 16 '12 at 2:36
Hi there, could you please add the kernel config option that you enabled (as a one liner.configfile entry , or path in ncurcesmenuconfig). Thank you
– nass
Jul 26 '16 at 14:13
add a comment |
kernel commit.
works perfect for me (tested in 3.7.8)
answered Feb 16 '13 at 9:14
puchu
5961718
2
More information on what this is doing would make this a much better answer.
– ChrisF
Feb 16 '13 at 10:11
add a comment |
It very buggy in Linux kernel 4.*. It's 2018 and with a brand new Asrock MB that uses this driver. Horrible experience with ATA errors.
answered Dec 5 at 1:59
dman
1518
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f363144%2fis-asmedia-asm1061-sata3-controller-supported-under-linux%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
After some trial and error, I managed to make it work. First of all, I upgraded my kernel to the Debian backports version (2.6.39-bpo.2-amd64), then I had set the mode of the controller to AHCI and afterwards, it was detected at boot time. I hope it's stable and has no problems.
After a few days I can confirm that it's stable and that I had no issues with it. Transfer speed seems fine.
edited Dec 19 '11 at 16:18
jonsca
2,952112539
answered Dec 9 '11 at 7:31
Debrian
142118
Setting the controller mode (in 2 places) to AHCI worked for Linux Mint 12 as well. Thank you!
– user78632
Jan 16 '12 at 2:36
Hi there, could you please add the kernel config option that you enabled (as a one liner.configfile entry , or path in ncurcesmenuconfig). Thank you
– nass
Jul 26 '16 at 14:13
add a comment |
After some trial and error, I managed to make it work. First of all, I upgraded my kernel to the Debian backports version (2.6.39-bpo.2-amd64), then I had set the mode of the controller to AHCI and afterwards, it was detected at boot time. I hope it's stable and has no problems.
After a few days I can confirm that it's stable and that I had no issues with it. Transfer speed seems fine.
edited Dec 19 '11 at 16:18
jonsca
2,952112539
answered Dec 9 '11 at 7:31
Debrian
142118
Setting the controller mode (in 2 places) to AHCI worked for Linux Mint 12 as well. Thank you!
– user78632
Jan 16 '12 at 2:36
Hi there, could you please add the kernel config option that you enabled (as a one liner.configfile entry , or path in ncurcesmenuconfig). Thank you
– nass
Jul 26 '16 at 14:13
add a comment |
After some trial and error, I managed to make it work. First of all, I upgraded my kernel to the Debian backports version (2.6.39-bpo.2-amd64), then I had set the mode of the controller to AHCI and afterwards, it was detected at boot time. I hope it's stable and has no problems.
After a few days I can confirm that it's stable and that I had no issues with it. Transfer speed seems fine.
edited Dec 19 '11 at 16:18
jonsca
2,952112539
answered Dec 9 '11 at 7:31
Debrian
142118
After some trial and error, I managed to make it work. First of all, I upgraded my kernel to the Debian backports version (2.6.39-bpo.2-amd64), then I had set the mode of the controller to AHCI and afterwards, it was detected at boot time. I hope it's stable and has no problems.
After a few days I can confirm that it's stable and that I had no issues with it. Transfer speed seems fine.
edited Dec 19 '11 at 16:18
jonsca
2,952112539
answered Dec 9 '11 at 7:31
Debrian
142118
edited Dec 19 '11 at 16:18
jonsca
2,952112539
edited Dec 19 '11 at 16:18
jonsca
2,952112539
edited Dec 19 '11 at 16:18
jonsca
2,952112539
2,952112539
answered Dec 9 '11 at 7:31
Debrian
142118
answered Dec 9 '11 at 7:31
Debrian
142118
answered Dec 9 '11 at 7:31
Debrian
142118
142118
Setting the controller mode (in 2 places) to AHCI worked for Linux Mint 12 as well. Thank you!
– user78632
Jan 16 '12 at 2:36
Hi there, could you please add the kernel config option that you enabled (as a one liner.configfile entry , or path in ncurcesmenuconfig). Thank you
– nass
Jul 26 '16 at 14:13
add a comment |
Setting the controller mode (in 2 places) to AHCI worked for Linux Mint 12 as well. Thank you!
– user78632
Jan 16 '12 at 2:36
Hi there, could you please add the kernel config option that you enabled (as a one liner.configfile entry , or path in ncurcesmenuconfig). Thank you
– nass
Jul 26 '16 at 14:13
Setting the controller mode (in 2 places) to AHCI worked for Linux Mint 12 as well. Thank you!
– user78632
Jan 16 '12 at 2:36
Setting the controller mode (in 2 places) to AHCI worked for Linux Mint 12 as well. Thank you!
– user78632
Jan 16 '12 at 2:36
Hi there, could you please add the kernel config option that you enabled (as a one liner
.config file entry , or path in ncurces menuconfig). Thank you– nass
Jul 26 '16 at 14:13
Hi there, could you please add the kernel config option that you enabled (as a one liner
.config file entry , or path in ncurces menuconfig). Thank you– nass
Jul 26 '16 at 14:13
add a comment |
kernel commit.
works perfect for me (tested in 3.7.8)
answered Feb 16 '13 at 9:14
puchu
5961718
2
More information on what this is doing would make this a much better answer.
– ChrisF
Feb 16 '13 at 10:11
add a comment |
kernel commit.
works perfect for me (tested in 3.7.8)
answered Feb 16 '13 at 9:14
puchu
5961718
2
More information on what this is doing would make this a much better answer.
– ChrisF
Feb 16 '13 at 10:11
add a comment |
kernel commit.
works perfect for me (tested in 3.7.8)
answered Feb 16 '13 at 9:14
puchu
5961718
kernel commit.
works perfect for me (tested in 3.7.8)
answered Feb 16 '13 at 9:14
puchu
5961718
edited Feb 18 '13 at 15:14
answered Feb 16 '13 at 9:14
puchu
5961718
answered Feb 16 '13 at 9:14
puchu
5961718
answered Feb 16 '13 at 9:14
puchu
5961718
5961718
2
More information on what this is doing would make this a much better answer.
– ChrisF
Feb 16 '13 at 10:11
add a comment |
2
More information on what this is doing would make this a much better answer.
– ChrisF
Feb 16 '13 at 10:11
2
2
More information on what this is doing would make this a much better answer.
– ChrisF
Feb 16 '13 at 10:11
More information on what this is doing would make this a much better answer.
– ChrisF
Feb 16 '13 at 10:11
add a comment |
It very buggy in Linux kernel 4.*. It's 2018 and with a brand new Asrock MB that uses this driver. Horrible experience with ATA errors.
answered Dec 5 at 1:59
dman
1518
add a comment |
It very buggy in Linux kernel 4.*. It's 2018 and with a brand new Asrock MB that uses this driver. Horrible experience with ATA errors.
answered Dec 5 at 1:59
dman
1518
add a comment |
It very buggy in Linux kernel 4.*. It's 2018 and with a brand new Asrock MB that uses this driver. Horrible experience with ATA errors.
answered Dec 5 at 1:59
dman
1518
It very buggy in Linux kernel 4.*. It's 2018 and with a brand new Asrock MB that uses this driver. Horrible experience with ATA errors.
answered Dec 5 at 1:59
dman
1518
answered Dec 5 at 1:59
dman
1518
answered Dec 5 at 1:59
dman
1518
answered Dec 5 at 1:59
dman
1518
1518
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f363144%2fis-asmedia-asm1061-sata3-controller-supported-under-linux%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
After some trial and error i managed to make it work. First of all i upgraded my kernel to the debian backports version (2.6.39-bpo.2-amd64), then i had set the mode of the controller to ahci and afterwords it was detected at boot time. I hope it's stable and has no problems.
– Debrian
Nov 30 '11 at 21:33