Internal SD Card Drive not Returning/Waking up after Sleep/Hibernate
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ height:90px;width:728px;box-sizing:border-box;
}
Here is the setup:
I have an internal SD card reader in my laptop. It contains a 32GB SD card that contains my research library. Information I use on a regular basis.
The problem:
When the computer is woken up after being in sleep or hibernation the SD drive does not return. No media removed chirp. No error reported. There is no evidence that it was ever there in the first place. Taking out the card and replacing it again has no effect. The SD card, and the card reader drive is ignored completely after wake up.
Rebooting will fix the problem, but this isn't really a fix as it defeats the point of being able to sleep the computer in the first place.
System Details: Macbook Pro running Windows 10 through boot camp. System runs Windows 10 almost exclusively. The SD card is internal. None of the USB ports and connect devices experience this problem. This has been an on going problem for months, through numerous updates so I do not think it is a update/driver issue.
Ideas? Suggestions? Anyone?
windows windows-10 macbook boot-camp sd-card
asked Apr 14 '16 at 17:51
codingCatcodingCat
211312
|
show 1 more comment
Here is the setup:
I have an internal SD card reader in my laptop. It contains a 32GB SD card that contains my research library. Information I use on a regular basis.
The problem:
When the computer is woken up after being in sleep or hibernation the SD drive does not return. No media removed chirp. No error reported. There is no evidence that it was ever there in the first place. Taking out the card and replacing it again has no effect. The SD card, and the card reader drive is ignored completely after wake up.
Rebooting will fix the problem, but this isn't really a fix as it defeats the point of being able to sleep the computer in the first place.
System Details: Macbook Pro running Windows 10 through boot camp. System runs Windows 10 almost exclusively. The SD card is internal. None of the USB ports and connect devices experience this problem. This has been an on going problem for months, through numerous updates so I do not think it is a update/driver issue.
Ideas? Suggestions? Anyone?
windows windows-10 macbook boot-camp sd-card
asked Apr 14 '16 at 17:51
codingCatcodingCat
211312
Look in device manager for the card reader then the 32gb card, double click it and see if there is a power management Tab, if there is be sure the "Allow the computer to turn off this device to save power" is Unchecked.
– Moab
Apr 14 '16 at 17:55
There is no power management tab is the listed for the drive. It did describe itself as a USB drive, so just to be extra sure I went in and disabled the "selective suspend" on all usb devices. This had no effect. While I was at it, I also checked for drive updates. There were none. And no old drives to revert to.
– codingCat
Apr 14 '16 at 18:17
Sounds like a Windows 10 bug then.
– Moab
Apr 14 '16 at 18:47
This issue has apparently been around for more than two years. Both apple and microsoft acknowledge it as an issue although neither has bothered to address it. A discussion on the topic at the apple discussion board can be found at the following link: discussions.apple.com/thread/5408471?start=0&tstart=0
– codingCat
Apr 14 '16 at 19:57
1
I have discovered a workaround - Lock the laptop first. From the lock screen, hibernate the laptop. When you turn the computer on again and login the drive should return as well.
– codingCat
Sep 5 '16 at 5:00
|
show 1 more comment
Here is the setup:
I have an internal SD card reader in my laptop. It contains a 32GB SD card that contains my research library. Information I use on a regular basis.
The problem:
When the computer is woken up after being in sleep or hibernation the SD drive does not return. No media removed chirp. No error reported. There is no evidence that it was ever there in the first place. Taking out the card and replacing it again has no effect. The SD card, and the card reader drive is ignored completely after wake up.
Rebooting will fix the problem, but this isn't really a fix as it defeats the point of being able to sleep the computer in the first place.
System Details: Macbook Pro running Windows 10 through boot camp. System runs Windows 10 almost exclusively. The SD card is internal. None of the USB ports and connect devices experience this problem. This has been an on going problem for months, through numerous updates so I do not think it is a update/driver issue.
Ideas? Suggestions? Anyone?
windows windows-10 macbook boot-camp sd-card
asked Apr 14 '16 at 17:51
codingCatcodingCat
211312
Here is the setup:
I have an internal SD card reader in my laptop. It contains a 32GB SD card that contains my research library. Information I use on a regular basis.
The problem:
When the computer is woken up after being in sleep or hibernation the SD drive does not return. No media removed chirp. No error reported. There is no evidence that it was ever there in the first place. Taking out the card and replacing it again has no effect. The SD card, and the card reader drive is ignored completely after wake up.
Rebooting will fix the problem, but this isn't really a fix as it defeats the point of being able to sleep the computer in the first place.
System Details: Macbook Pro running Windows 10 through boot camp. System runs Windows 10 almost exclusively. The SD card is internal. None of the USB ports and connect devices experience this problem. This has been an on going problem for months, through numerous updates so I do not think it is a update/driver issue.
Ideas? Suggestions? Anyone?
windows windows-10 macbook boot-camp sd-card
windows windows-10 macbook boot-camp sd-card
asked Apr 14 '16 at 17:51
codingCatcodingCat
211312
asked Apr 14 '16 at 17:51
codingCatcodingCat
211312
asked Apr 14 '16 at 17:51
codingCatcodingCat
211312
asked Apr 14 '16 at 17:51
codingCatcodingCat
211312
asked Apr 14 '16 at 17:51
codingCatcodingCat
211312
211312
Look in device manager for the card reader then the 32gb card, double click it and see if there is a power management Tab, if there is be sure the "Allow the computer to turn off this device to save power" is Unchecked.
– Moab
Apr 14 '16 at 17:55
There is no power management tab is the listed for the drive. It did describe itself as a USB drive, so just to be extra sure I went in and disabled the "selective suspend" on all usb devices. This had no effect. While I was at it, I also checked for drive updates. There were none. And no old drives to revert to.
– codingCat
Apr 14 '16 at 18:17
Sounds like a Windows 10 bug then.
– Moab
Apr 14 '16 at 18:47
This issue has apparently been around for more than two years. Both apple and microsoft acknowledge it as an issue although neither has bothered to address it. A discussion on the topic at the apple discussion board can be found at the following link: discussions.apple.com/thread/5408471?start=0&tstart=0
– codingCat
Apr 14 '16 at 19:57
1
I have discovered a workaround - Lock the laptop first. From the lock screen, hibernate the laptop. When you turn the computer on again and login the drive should return as well.
– codingCat
Sep 5 '16 at 5:00
|
show 1 more comment
Look in device manager for the card reader then the 32gb card, double click it and see if there is a power management Tab, if there is be sure the "Allow the computer to turn off this device to save power" is Unchecked.
– Moab
Apr 14 '16 at 17:55
There is no power management tab is the listed for the drive. It did describe itself as a USB drive, so just to be extra sure I went in and disabled the "selective suspend" on all usb devices. This had no effect. While I was at it, I also checked for drive updates. There were none. And no old drives to revert to.
– codingCat
Apr 14 '16 at 18:17
Sounds like a Windows 10 bug then.
– Moab
Apr 14 '16 at 18:47
This issue has apparently been around for more than two years. Both apple and microsoft acknowledge it as an issue although neither has bothered to address it. A discussion on the topic at the apple discussion board can be found at the following link: discussions.apple.com/thread/5408471?start=0&tstart=0
– codingCat
Apr 14 '16 at 19:57
1
I have discovered a workaround - Lock the laptop first. From the lock screen, hibernate the laptop. When you turn the computer on again and login the drive should return as well.
– codingCat
Sep 5 '16 at 5:00
Look in device manager for the card reader then the 32gb card, double click it and see if there is a power management Tab, if there is be sure the "Allow the computer to turn off this device to save power" is Unchecked.
– Moab
Apr 14 '16 at 17:55
Look in device manager for the card reader then the 32gb card, double click it and see if there is a power management Tab, if there is be sure the "Allow the computer to turn off this device to save power" is Unchecked.
– Moab
Apr 14 '16 at 17:55
There is no power management tab is the listed for the drive. It did describe itself as a USB drive, so just to be extra sure I went in and disabled the "selective suspend" on all usb devices. This had no effect. While I was at it, I also checked for drive updates. There were none. And no old drives to revert to.
– codingCat
Apr 14 '16 at 18:17
There is no power management tab is the listed for the drive. It did describe itself as a USB drive, so just to be extra sure I went in and disabled the "selective suspend" on all usb devices. This had no effect. While I was at it, I also checked for drive updates. There were none. And no old drives to revert to.
– codingCat
Apr 14 '16 at 18:17
Sounds like a Windows 10 bug then.
– Moab
Apr 14 '16 at 18:47
Sounds like a Windows 10 bug then.
– Moab
Apr 14 '16 at 18:47
This issue has apparently been around for more than two years. Both apple and microsoft acknowledge it as an issue although neither has bothered to address it. A discussion on the topic at the apple discussion board can be found at the following link: discussions.apple.com/thread/5408471?start=0&tstart=0
– codingCat
Apr 14 '16 at 19:57
This issue has apparently been around for more than two years. Both apple and microsoft acknowledge it as an issue although neither has bothered to address it. A discussion on the topic at the apple discussion board can be found at the following link: discussions.apple.com/thread/5408471?start=0&tstart=0
– codingCat
Apr 14 '16 at 19:57
1
1
I have discovered a workaround - Lock the laptop first. From the lock screen, hibernate the laptop. When you turn the computer on again and login the drive should return as well.
– codingCat
Sep 5 '16 at 5:00
I have discovered a workaround - Lock the laptop first. From the lock screen, hibernate the laptop. When you turn the computer on again and login the drive should return as well.
– codingCat
Sep 5 '16 at 5:00
|
show 1 more comment
1 Answer
1
active
oldest
votes
Solution: (1) Select the SD-Card in Device Manager. Then in the "view" menu select devices by connection. Click on properties of "Apple SD Card Reader" (which is the parent of "Apple SD Card Reader USB Device"). Then in the Power-Management tab uncheck "Allow the computer to turn off this device to save power". Then do a restart.
(2) This method will successfully reactivate the "card reader" or the "thunderbolt-ethernet-adapter" after hibernation without having to lock the screen.
(3) When the computer is woken up after being in sleep mode, you need to put it into hibernation. After coming out of hibernation all your devices will be there again. This is a little bit cumbersome, but this workaround will save you from restarting your computer.
answered Oct 25 '17 at 12:04
RalphRalph
1
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1065513%2finternal-sd-card-drive-not-returning-waking-up-after-sleep-hibernate%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Solution: (1) Select the SD-Card in Device Manager. Then in the "view" menu select devices by connection. Click on properties of "Apple SD Card Reader" (which is the parent of "Apple SD Card Reader USB Device"). Then in the Power-Management tab uncheck "Allow the computer to turn off this device to save power". Then do a restart.
(2) This method will successfully reactivate the "card reader" or the "thunderbolt-ethernet-adapter" after hibernation without having to lock the screen.
(3) When the computer is woken up after being in sleep mode, you need to put it into hibernation. After coming out of hibernation all your devices will be there again. This is a little bit cumbersome, but this workaround will save you from restarting your computer.
answered Oct 25 '17 at 12:04
RalphRalph
1
add a comment |
Solution: (1) Select the SD-Card in Device Manager. Then in the "view" menu select devices by connection. Click on properties of "Apple SD Card Reader" (which is the parent of "Apple SD Card Reader USB Device"). Then in the Power-Management tab uncheck "Allow the computer to turn off this device to save power". Then do a restart.
(2) This method will successfully reactivate the "card reader" or the "thunderbolt-ethernet-adapter" after hibernation without having to lock the screen.
(3) When the computer is woken up after being in sleep mode, you need to put it into hibernation. After coming out of hibernation all your devices will be there again. This is a little bit cumbersome, but this workaround will save you from restarting your computer.
answered Oct 25 '17 at 12:04
RalphRalph
1
add a comment |
Solution: (1) Select the SD-Card in Device Manager. Then in the "view" menu select devices by connection. Click on properties of "Apple SD Card Reader" (which is the parent of "Apple SD Card Reader USB Device"). Then in the Power-Management tab uncheck "Allow the computer to turn off this device to save power". Then do a restart.
(2) This method will successfully reactivate the "card reader" or the "thunderbolt-ethernet-adapter" after hibernation without having to lock the screen.
(3) When the computer is woken up after being in sleep mode, you need to put it into hibernation. After coming out of hibernation all your devices will be there again. This is a little bit cumbersome, but this workaround will save you from restarting your computer.
answered Oct 25 '17 at 12:04
RalphRalph
1
Solution: (1) Select the SD-Card in Device Manager. Then in the "view" menu select devices by connection. Click on properties of "Apple SD Card Reader" (which is the parent of "Apple SD Card Reader USB Device"). Then in the Power-Management tab uncheck "Allow the computer to turn off this device to save power". Then do a restart.
(2) This method will successfully reactivate the "card reader" or the "thunderbolt-ethernet-adapter" after hibernation without having to lock the screen.
(3) When the computer is woken up after being in sleep mode, you need to put it into hibernation. After coming out of hibernation all your devices will be there again. This is a little bit cumbersome, but this workaround will save you from restarting your computer.
answered Oct 25 '17 at 12:04
RalphRalph
1
answered Oct 25 '17 at 12:04
RalphRalph
1
answered Oct 25 '17 at 12:04
RalphRalph
1
answered Oct 25 '17 at 12:04
RalphRalph
1
1
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1065513%2finternal-sd-card-drive-not-returning-waking-up-after-sleep-hibernate%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Look in device manager for the card reader then the 32gb card, double click it and see if there is a power management Tab, if there is be sure the "Allow the computer to turn off this device to save power" is Unchecked.
– Moab
Apr 14 '16 at 17:55
There is no power management tab is the listed for the drive. It did describe itself as a USB drive, so just to be extra sure I went in and disabled the "selective suspend" on all usb devices. This had no effect. While I was at it, I also checked for drive updates. There were none. And no old drives to revert to.
– codingCat
Apr 14 '16 at 18:17
Sounds like a Windows 10 bug then.
– Moab
Apr 14 '16 at 18:47
This issue has apparently been around for more than two years. Both apple and microsoft acknowledge it as an issue although neither has bothered to address it. A discussion on the topic at the apple discussion board can be found at the following link: discussions.apple.com/thread/5408471?start=0&tstart=0
– codingCat
Apr 14 '16 at 19:57
1
I have discovered a workaround - Lock the laptop first. From the lock screen, hibernate the laptop. When you turn the computer on again and login the drive should return as well.
– codingCat
Sep 5 '16 at 5:00