Abbreviate author names as “Lastname AB” (without space or period) in bibliography
I want My journal wants author names to be abbreviated as "Lastname, FS" in the bibliography, but haven't found a way to do this after some excessive searching. Does anyone know if this is possible?
Here is MWE that shows how I don't want it to be
documentclass{article}
usepackage[backend=biber,giveninits=true]{biblatex}
DeclareNameAlias{author}{last-first}
addbibresource{jobname.bib}
usepackage{filecontents}
begin{filecontents}{jobname.bib}
@book{key,
author = {Lastname, First Second},
year = {2001},
title = {Title},
publisher = {Publisher},
}
end{filecontents}
begin{document}
cite{key}
printbibliography
end{document}
Result:
biblatex biber
add a comment |
I want My journal wants author names to be abbreviated as "Lastname, FS" in the bibliography, but haven't found a way to do this after some excessive searching. Does anyone know if this is possible?
Here is MWE that shows how I don't want it to be
documentclass{article}
usepackage[backend=biber,giveninits=true]{biblatex}
DeclareNameAlias{author}{last-first}
addbibresource{jobname.bib}
usepackage{filecontents}
begin{filecontents}{jobname.bib}
@book{key,
author = {Lastname, First Second},
year = {2001},
title = {Title},
publisher = {Publisher},
}
end{filecontents}
begin{document}
cite{key}
printbibliography
end{document}
Result:
biblatex biber
2
Since the question mentions a journal I should warn that I am not aware of a lot for journals that can acceptbiblatex
submissions.biblatex
imposes quite a different workflow on publishers than standard BibTeX orthebibliography
, plus publishers are known to prefer stable (read: older) systems, where incompatibilities with modernbiblatex
could arise. Many journals have LaTeX templates and those almost never featurebiblatex
and usually insist on particular.bst
styles orthebibliography
. See also tex.stackexchange.com/q/12175/35864
– moewe
Mar 28 at 8:52
add a comment |
I want My journal wants author names to be abbreviated as "Lastname, FS" in the bibliography, but haven't found a way to do this after some excessive searching. Does anyone know if this is possible?
Here is MWE that shows how I don't want it to be
documentclass{article}
usepackage[backend=biber,giveninits=true]{biblatex}
DeclareNameAlias{author}{last-first}
addbibresource{jobname.bib}
usepackage{filecontents}
begin{filecontents}{jobname.bib}
@book{key,
author = {Lastname, First Second},
year = {2001},
title = {Title},
publisher = {Publisher},
}
end{filecontents}
begin{document}
cite{key}
printbibliography
end{document}
Result:
biblatex biber
I want My journal wants author names to be abbreviated as "Lastname, FS" in the bibliography, but haven't found a way to do this after some excessive searching. Does anyone know if this is possible?
Here is MWE that shows how I don't want it to be
documentclass{article}
usepackage[backend=biber,giveninits=true]{biblatex}
DeclareNameAlias{author}{last-first}
addbibresource{jobname.bib}
usepackage{filecontents}
begin{filecontents}{jobname.bib}
@book{key,
author = {Lastname, First Second},
year = {2001},
title = {Title},
publisher = {Publisher},
}
end{filecontents}
begin{document}
cite{key}
printbibliography
end{document}
Result:
biblatex biber
biblatex biber
edited Mar 28 at 8:13
Filip S.
asked Mar 28 at 8:00
Filip S.Filip S.
22018
22018
2
Since the question mentions a journal I should warn that I am not aware of a lot for journals that can acceptbiblatex
submissions.biblatex
imposes quite a different workflow on publishers than standard BibTeX orthebibliography
, plus publishers are known to prefer stable (read: older) systems, where incompatibilities with modernbiblatex
could arise. Many journals have LaTeX templates and those almost never featurebiblatex
and usually insist on particular.bst
styles orthebibliography
. See also tex.stackexchange.com/q/12175/35864
– moewe
Mar 28 at 8:52
add a comment |
2
Since the question mentions a journal I should warn that I am not aware of a lot for journals that can acceptbiblatex
submissions.biblatex
imposes quite a different workflow on publishers than standard BibTeX orthebibliography
, plus publishers are known to prefer stable (read: older) systems, where incompatibilities with modernbiblatex
could arise. Many journals have LaTeX templates and those almost never featurebiblatex
and usually insist on particular.bst
styles orthebibliography
. See also tex.stackexchange.com/q/12175/35864
– moewe
Mar 28 at 8:52
2
2
Since the question mentions a journal I should warn that I am not aware of a lot for journals that can accept
biblatex
submissions. biblatex
imposes quite a different workflow on publishers than standard BibTeX or thebibliography
, plus publishers are known to prefer stable (read: older) systems, where incompatibilities with modern biblatex
could arise. Many journals have LaTeX templates and those almost never feature biblatex
and usually insist on particular .bst
styles or thebibliography
. See also tex.stackexchange.com/q/12175/35864– moewe
Mar 28 at 8:52
Since the question mentions a journal I should warn that I am not aware of a lot for journals that can accept
biblatex
submissions. biblatex
imposes quite a different workflow on publishers than standard BibTeX or thebibliography
, plus publishers are known to prefer stable (read: older) systems, where incompatibilities with modern biblatex
could arise. Many journals have LaTeX templates and those almost never feature biblatex
and usually insist on particular .bst
styles or thebibliography
. See also tex.stackexchange.com/q/12175/35864– moewe
Mar 28 at 8:52
add a comment |
1 Answer
1
active
oldest
votes
The option terseinits
does that for you. terseinits
is a meta-option that essentially executes the following definitions
renewrobustcmd*{bibinitperiod}{}
renewrobustcmd*{bibinitdelim}{}
renewrobustcmd*{bibinithyphendelim}{}
and sets the test ifterseinits
(that test is not used by a lot of styles, apparently, so it hardly matters).
If you want a more fine-grained control, you can redefine these macros yourself. They do pretty much what their names suggest: bibinitperiod
is the punctuation after a name initial, bibinitdelim
the space between two name initials and bibinithyphendelim
replaces the two between hyphenated name parts such as Jean-Jacques
.
documentclass{article}
usepackage[backend=biber, giveninits=true, terseinits=true]{biblatex}
DeclareNameAlias{author}{family-given}
usepackage{filecontents}
begin{filecontents}{jobname.bib}
@book{key,
author = {Lastname, First Second},
year = {2001},
title = {Title},
publisher = {Publisher},
}
end{filecontents}
addbibresource{jobname.bib}
begin{document}
cite{key}
printbibliography
end{document}
Note that I changed the deprecated last-first
to the new family-given
, since you are already using the new name giveninits
(cf. Biblatex 3.3 name formatting).
If you are using authoryear
, you may want to redefine sortname
and not only author
:
DeclareNameAlias{author}{family-given}
The last period after "FS" isnametitledelim
, i.e. the separator between the name and the title, and not a dot for the initials. If it should go as well, you may want to addDeclareDelimFormat[bib]{nametitledelim}{addspace}
– moewe
Mar 28 at 8:50
That's perfect, thanks! I usestyle=authoryear
, so the last period after "FS" doesn't show up, but it's nice to know anyway.
– Filip S.
Mar 28 at 9:05
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "85"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f481852%2fabbreviate-author-names-as-lastname-ab-without-space-or-period-in-bibliograp%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
The option terseinits
does that for you. terseinits
is a meta-option that essentially executes the following definitions
renewrobustcmd*{bibinitperiod}{}
renewrobustcmd*{bibinitdelim}{}
renewrobustcmd*{bibinithyphendelim}{}
and sets the test ifterseinits
(that test is not used by a lot of styles, apparently, so it hardly matters).
If you want a more fine-grained control, you can redefine these macros yourself. They do pretty much what their names suggest: bibinitperiod
is the punctuation after a name initial, bibinitdelim
the space between two name initials and bibinithyphendelim
replaces the two between hyphenated name parts such as Jean-Jacques
.
documentclass{article}
usepackage[backend=biber, giveninits=true, terseinits=true]{biblatex}
DeclareNameAlias{author}{family-given}
usepackage{filecontents}
begin{filecontents}{jobname.bib}
@book{key,
author = {Lastname, First Second},
year = {2001},
title = {Title},
publisher = {Publisher},
}
end{filecontents}
addbibresource{jobname.bib}
begin{document}
cite{key}
printbibliography
end{document}
Note that I changed the deprecated last-first
to the new family-given
, since you are already using the new name giveninits
(cf. Biblatex 3.3 name formatting).
If you are using authoryear
, you may want to redefine sortname
and not only author
:
DeclareNameAlias{author}{family-given}
The last period after "FS" isnametitledelim
, i.e. the separator between the name and the title, and not a dot for the initials. If it should go as well, you may want to addDeclareDelimFormat[bib]{nametitledelim}{addspace}
– moewe
Mar 28 at 8:50
That's perfect, thanks! I usestyle=authoryear
, so the last period after "FS" doesn't show up, but it's nice to know anyway.
– Filip S.
Mar 28 at 9:05
add a comment |
The option terseinits
does that for you. terseinits
is a meta-option that essentially executes the following definitions
renewrobustcmd*{bibinitperiod}{}
renewrobustcmd*{bibinitdelim}{}
renewrobustcmd*{bibinithyphendelim}{}
and sets the test ifterseinits
(that test is not used by a lot of styles, apparently, so it hardly matters).
If you want a more fine-grained control, you can redefine these macros yourself. They do pretty much what their names suggest: bibinitperiod
is the punctuation after a name initial, bibinitdelim
the space between two name initials and bibinithyphendelim
replaces the two between hyphenated name parts such as Jean-Jacques
.
documentclass{article}
usepackage[backend=biber, giveninits=true, terseinits=true]{biblatex}
DeclareNameAlias{author}{family-given}
usepackage{filecontents}
begin{filecontents}{jobname.bib}
@book{key,
author = {Lastname, First Second},
year = {2001},
title = {Title},
publisher = {Publisher},
}
end{filecontents}
addbibresource{jobname.bib}
begin{document}
cite{key}
printbibliography
end{document}
Note that I changed the deprecated last-first
to the new family-given
, since you are already using the new name giveninits
(cf. Biblatex 3.3 name formatting).
If you are using authoryear
, you may want to redefine sortname
and not only author
:
DeclareNameAlias{author}{family-given}
The last period after "FS" isnametitledelim
, i.e. the separator between the name and the title, and not a dot for the initials. If it should go as well, you may want to addDeclareDelimFormat[bib]{nametitledelim}{addspace}
– moewe
Mar 28 at 8:50
That's perfect, thanks! I usestyle=authoryear
, so the last period after "FS" doesn't show up, but it's nice to know anyway.
– Filip S.
Mar 28 at 9:05
add a comment |
The option terseinits
does that for you. terseinits
is a meta-option that essentially executes the following definitions
renewrobustcmd*{bibinitperiod}{}
renewrobustcmd*{bibinitdelim}{}
renewrobustcmd*{bibinithyphendelim}{}
and sets the test ifterseinits
(that test is not used by a lot of styles, apparently, so it hardly matters).
If you want a more fine-grained control, you can redefine these macros yourself. They do pretty much what their names suggest: bibinitperiod
is the punctuation after a name initial, bibinitdelim
the space between two name initials and bibinithyphendelim
replaces the two between hyphenated name parts such as Jean-Jacques
.
documentclass{article}
usepackage[backend=biber, giveninits=true, terseinits=true]{biblatex}
DeclareNameAlias{author}{family-given}
usepackage{filecontents}
begin{filecontents}{jobname.bib}
@book{key,
author = {Lastname, First Second},
year = {2001},
title = {Title},
publisher = {Publisher},
}
end{filecontents}
addbibresource{jobname.bib}
begin{document}
cite{key}
printbibliography
end{document}
Note that I changed the deprecated last-first
to the new family-given
, since you are already using the new name giveninits
(cf. Biblatex 3.3 name formatting).
If you are using authoryear
, you may want to redefine sortname
and not only author
:
DeclareNameAlias{author}{family-given}
The option terseinits
does that for you. terseinits
is a meta-option that essentially executes the following definitions
renewrobustcmd*{bibinitperiod}{}
renewrobustcmd*{bibinitdelim}{}
renewrobustcmd*{bibinithyphendelim}{}
and sets the test ifterseinits
(that test is not used by a lot of styles, apparently, so it hardly matters).
If you want a more fine-grained control, you can redefine these macros yourself. They do pretty much what their names suggest: bibinitperiod
is the punctuation after a name initial, bibinitdelim
the space between two name initials and bibinithyphendelim
replaces the two between hyphenated name parts such as Jean-Jacques
.
documentclass{article}
usepackage[backend=biber, giveninits=true, terseinits=true]{biblatex}
DeclareNameAlias{author}{family-given}
usepackage{filecontents}
begin{filecontents}{jobname.bib}
@book{key,
author = {Lastname, First Second},
year = {2001},
title = {Title},
publisher = {Publisher},
}
end{filecontents}
addbibresource{jobname.bib}
begin{document}
cite{key}
printbibliography
end{document}
Note that I changed the deprecated last-first
to the new family-given
, since you are already using the new name giveninits
(cf. Biblatex 3.3 name formatting).
If you are using authoryear
, you may want to redefine sortname
and not only author
:
DeclareNameAlias{author}{family-given}
edited Mar 28 at 9:13
answered Mar 28 at 8:36
moewemoewe
95.8k10116359
95.8k10116359
The last period after "FS" isnametitledelim
, i.e. the separator between the name and the title, and not a dot for the initials. If it should go as well, you may want to addDeclareDelimFormat[bib]{nametitledelim}{addspace}
– moewe
Mar 28 at 8:50
That's perfect, thanks! I usestyle=authoryear
, so the last period after "FS" doesn't show up, but it's nice to know anyway.
– Filip S.
Mar 28 at 9:05
add a comment |
The last period after "FS" isnametitledelim
, i.e. the separator between the name and the title, and not a dot for the initials. If it should go as well, you may want to addDeclareDelimFormat[bib]{nametitledelim}{addspace}
– moewe
Mar 28 at 8:50
That's perfect, thanks! I usestyle=authoryear
, so the last period after "FS" doesn't show up, but it's nice to know anyway.
– Filip S.
Mar 28 at 9:05
The last period after "FS" is
nametitledelim
, i.e. the separator between the name and the title, and not a dot for the initials. If it should go as well, you may want to add DeclareDelimFormat[bib]{nametitledelim}{addspace}
– moewe
Mar 28 at 8:50
The last period after "FS" is
nametitledelim
, i.e. the separator between the name and the title, and not a dot for the initials. If it should go as well, you may want to add DeclareDelimFormat[bib]{nametitledelim}{addspace}
– moewe
Mar 28 at 8:50
That's perfect, thanks! I use
style=authoryear
, so the last period after "FS" doesn't show up, but it's nice to know anyway.– Filip S.
Mar 28 at 9:05
That's perfect, thanks! I use
style=authoryear
, so the last period after "FS" doesn't show up, but it's nice to know anyway.– Filip S.
Mar 28 at 9:05
add a comment |
Thanks for contributing an answer to TeX - LaTeX Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f481852%2fabbreviate-author-names-as-lastname-ab-without-space-or-period-in-bibliograp%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
Since the question mentions a journal I should warn that I am not aware of a lot for journals that can accept
biblatex
submissions.biblatex
imposes quite a different workflow on publishers than standard BibTeX orthebibliography
, plus publishers are known to prefer stable (read: older) systems, where incompatibilities with modernbiblatex
could arise. Many journals have LaTeX templates and those almost never featurebiblatex
and usually insist on particular.bst
styles orthebibliography
. See also tex.stackexchange.com/q/12175/35864– moewe
Mar 28 at 8:52